CISCO MDS9124光纤交换机安装配置手册版本二零零九年七月神州数码(中国)技术中心文档控制更改记录审阅发布目录目录..................................................... 错误!未定义书签。
第1章介绍.............................................. 错误!未定义书签。
第2章初始化光纤交换机.................................. 错误!未定义书签。
第3章 Fabric Manager .................................... 错误!未定义书签。
、软件介绍.......................................... 错误!未定义书签。
、软件安装.......................................... 错误!未定义书签。
第4章 zone划分......................................... 错误!未定义书签。
、 VSAN概念......................................... 错误!未定义书签。
、 zone配置过程..................................... 错误!未定义书签。
、命令列表.......................................... 错误!未定义书签。
第1章 CISCO MDS9124介绍Cisco ® MDS 9124 24端口多层光纤阵列交换机拥有24个端口，支持4、2和1 Gbps 速率，在紧凑的1机架单元(1RU)机型中，以廉宜价格提供了灵活性、高可用性、安全性和易用性，实现了出色的价值。
Cisco MDS 9124能以8端口的增量，灵活地从8端口扩展到24端口，可满足部门存储局域网(SAN)交换机和企业SAN 中边缘交换机的密度需求。
Cisco MDS 9124支持快速配置和任务向导，能够快速、简便地部署在任何规模的网络中。
它采用了Cisco MDS 9000 SAN-OS 软件，包括先进的存储网络特性和功能，与Cisco MDS 9500系列多层导向器和Cisco MDS 9200系列多层光纤阵列交换机兼容，在核心-边缘部署中提供了透明的端到端服务交付能力。
端口介绍： 10/100-Mbps Ethernet 10/100-Mbps Ethernet management port + console port management port + console port 24 auto-sensing 4-Gbps FC 24 auto-sensing 4-Gbps FC ports in 4-port groups ports in 4-port groups 256MB compact flash, 256MB compact flash, 512MB SDRAM512MB SDRAMDual hot-swappable Dual hot-swappable power supplies power supplies 3 fixed fans + 1 fan per 3 fixed fans + 1 fan per power supply power supply第2章初始化光纤交换机MDS9124光纤交换机加电需要进行初始化设置，本身的Management Port没有默认的ＩＰ，需要初始化的时候设置，用串口线连接Console Port，具体的设置过程如下：--- Basic System Configuration Dialog ---This setup utility will guide you through the basic configuration of thesystem. Setup configures only enough connectivity for management of thesystem.Press Enter in case you want to skip any dialog. Use ctrl-c at anytime toskip away remaining dialogs.Would you like to enter the basic configuration dialog (yes/no): yEnter the password for "admin" : adminCreate another login account (yes/no) [n]: nConfigure SNMPv3 Management parameters (yes/no) [y]: ySNMPv3 user name [admin]: adminSNMPv3 user authentication password : admin123The same password will be used for SNMPv3 privacy as well.Configure read-only SNMP community string (yes/no) [n]: <Enter>Configure read-write SNMP community string (yes/no) [n]: <Enter>Enter the switch name: mds9124-1 (where NNN is your switch model and X isyour pod number; for example, mds9506-1)Continue with Out-of-band (mgmt0) management configuration (yes/no) [y]:yMgmt0 IP address : (Use the IP address of your switch from Table 1 inAppendix B of the lab reference guide called “Accessing the Remote Lab”.You can also derive the IP address of your switch by replacing X with your pod number, and Y with 3 [if you are working on a MDS 9216) or 5 (if you are working on the MDS 9506].)Mgmt0 IP netmask : with In-band (vsan1) management configuration (yes/no) [n]: <Enter>Enable the ip routing capabilities (yes/no) [y]: yConfigure static route (yes/no) [y]: nConfigure the default network (yes/no) [y]: nConfigure the default gateway (yes/no) [y]: <Enter>IP address of the default gateway : (where X is your pod number) Configure the DNS IP address (yes/no) [n]: <Enter>Configure the default domain name (yes/no) [n]: <Enter>Enable the telnet service (yes/no) [y]: <Enter>Enable the ssh service (yes/no) [n]: <Enter>Configure the ntp server (yes/no) [n]: <Enter>Configure default switchport interface state (shut/noshut) [shut]:<Enter>Configure default switchport trunk mode (on/off/auto) [on]: <Enter> Configure default zone policy (permit/deny) [deny]: <Enter>Enable full zoneset distribution (yes/no) [n]: <Enter>The following configuration will be applied:username admin password admin role network-adminsnmp-server user admin network-admin auth md5 admin123 priv admin123 switchname mds9214-1interface mgmt0ip address shutdownip default-gateway server enableno ssh server enablesystem default switchport shutdownsystem default switchport trunk mode onno zone default-zone permit vsan 1-4093no zoneset distribute full vsan 1-4093Would you like to edit the configuration (yes/no) [n]: <Enter>Use this configuration and save it (yes/no) [y]: <Enter>第3章 Fabric Manager3.1、软件介绍简介Cisco®Fabric Manager是一种基于Web、易于使用的响应性应用，能够用集成式方法实现交换机和网络管理，从而简化存储局域网（SAN）中Cisco MDS 9000系列交换机的管理。
Cisco Fabric Manager能够为存储管理员提供网络级管理功能，包括识别、多交换机配置、连续网络监控和故障排除。