NF A49-580-1988
NF A87-021-1998
NF A89-600-1998
NF E04-014-1933
NF E25-011-1992
NF E25-022-1-2001
分:产品等级 A、B 及 C
Part 1 : product grades A, B and C.)
NF E25-023-1992
NF E27-341-1973
商业性通用螺栓制造.“木 (BOLTS FOR TIMBER.) 结构”螺栓 (COUNTERSUNK OR RAISED COUNTERSUNK 商业性通用螺栓制造.埋 HEAD BOLTS (NIB OR 头或凸圆埋头木螺栓 SQUARE NECK) FOR TIMBER.) (ROUND HEAD 商业性通用螺栓制造.凸 NECK 圆头方颈螺栓 (“JAPY“ TYPE).) SQUARE BOLTS
NF E25-100-1-1999
NF E25-100-3-1992
NF E25-100-4-1992
NF E25-100-6-1998
NF E25-100-7-1995
NF E25-112-2001 NF
E25-113-1992
缩杆制品
Product grade B. Reduced shank (shank diameter = pitch diameter).) (Hexagon head bolts - Product grade C.)
NF E25-800-1-1994
NF E25-800-2-1994
NF E25-800-3-1994
NF E25-800-4-1994
NF E27-000-1972 NF E27-312-1959 NF E27-313-1959
商业性通用螺栓制造.圆 (CHEESE BOLTS.) 柱头粗制或精制螺栓
商业性通用螺栓制造.圆 头粗制或精制螺栓.直径 (ROUND HEAD NIB BOLTS.) 从４到６０mm 商业性通用螺栓制造.埋 (COUNTERSUNK OR 头或凸圆埋头铁制粗制或 RAISED COUNTERSUNK 精制螺栓.直径４到６０ HEAD NI-314-1959
法国螺栓标准(NF bolt standards) 法国螺栓标准
ANSI | BS | DIN | EN | GB | | DIC ISO | JIS | NF
编号 NF A47-251-5-2003
中文名称
英文名称
(Terminations for steel wire 钢丝绳接线端.安全.第 5 ropes - Safety - Part 5 : U-bolt 部分:U 形螺栓拉线器 wire rope grips.) (Cooplers, loose spigots and 钢管脚手架和支承架用联 base-plates for use in working 结件、中心螺栓和踏板. scaffolds and falsework made of steel tubes. Requirements and 要求和测试程序 test procedures.) 焊接.弧双端螺栓焊接的 (Welding. Studs and ceramic 双端螺栓和陶瓷箍.(欧洲 ferrules for arc stud welding.) 标准 EN ISO 13918) (WELDING. ARC STUD 焊接.金属材料的弧双端 WELDING OF METALLIC 螺栓焊接 (欧洲标 准 EN MATERIALS. (EUROPEAN ISO 14555) STANDARD EN ISO 14555).) (TECHNICAL DRAWINGS FOR 机械、电气和相关工业的 MECHANICAL,ELECTRICAL 技术图，构架的铆钉和螺 AND CONNECTED 栓的图上符号表示法（１ INDUSTRIES. GRAPHICAL ９８１．９确认） SYMBOLS ON DRAWINGS FOR RIVETS AND BOLTS.) (MECHANICAL PROPERTIES OF BOLTS, 紧固件的机械特性.由非 FASTENERS. 亚铁金属制造的螺栓,螺 SCREWS, STUDS AND NUTS MADE OF NON-FERROUS 钉,柱螺栓和螺母 METALS. (EUROPEAN STANDARD EN 28839).) 紧固件公差.螺栓、螺钉、 (Tolerances for fasteners 双头螺栓和螺母.第 1 部 Bolts, screws, studs and nuts -
NF E25-115-1-2001
六角头螺栓.产品等级 C
NF E25-140-1994
(FASTENERS. ARC WELDING STUDS 紧固件.电弧焊接双端螺 LOADING. SYMBOL SA. AND 栓.符号 SA.尺寸和物理化 DIMENSIONS 学特性.拉制电弧焊接螺 PROPERTIES PHYSICAL-CHIMICAL. 栓系统 DRAWN ARC STUD WELDING SYSTEM.) (Hexagon head bolts with 米制细牙螺纹的六角头螺 metric fine pitch thread 栓.产品等级 A 和 B Product grades A and B.) (Tolerances for fasteners - Part 紧固件公差.第 3 部分:螺 3 : plain washers for bolts, 栓、螺钉和螺母用平垫 screws and nuts - Product 圈.A 级和 C 级 grades A and C.) (Hexagon bolts with flange with 米制细牙螺纹六角法兰面 metric fine pitch thread - Small 螺栓.小系列 series.) (HEXAGON BOLTS WITH 法兰六角型螺栓.小型系 FLANGE. SMALL SERIES. (EUROPEAN STANDARD EN 列 1662).) (HEXAGON BOLTS WITH 带法兰六角头螺栓.重形 FLANGE. HEAVY SERIES. (EUROPEAN STANDARD EN 系列(欧洲标准 EN 1665) 1665).) (Plain washers for metric bolts, 通用米制螺栓、螺钉和螺 screws and nuts for general 母用平垫圈.一般示意图 purposes - General plan.) 紧固件.波纹钢管用螺栓. (FASTENERS. BOLTS FOR STEEL 第 0 部分:按要求所制的螺 CORRUGATED PIPES. PART 0 : BOLTS 栓
NF E25-152-2001
NF E25-501-2000
NF E25-504-1-2003
NF E25-504-1998
NF E25-505-1997
NF E25-525-2000
NF E25-800-0-1994
RELATED PRESCRIPTIONS (SCREWS + NUTS).) (FASTENERS. BOLTS FOR CORRUGATED STEEL 紧固件.波纹钢管用螺栓. PIPES. PART 1 : HEXAGON 第 1 部分:带法兰或不带法 HEAD SCREWS WITH OR 兰,带尖或不带尖的六角 WITHOUT FLANGE, WITH 头螺钉.产品等级 A OR WITHOUT NIBS. PRODUCT GRADE A.) (FASTENERS. BOLTS FOR CORRUGATED STEEL 紧固件.波纹钢管用螺栓. PIPES. PART 2 : CHEESE 第 2 部分:带尖或不带尖的 HEAD SCREWS, WITH OR 圆头螺钉.产品等级 A WITHOUT NIBS. PRODUCT GRADE A.) (FASTENERS. BOLTS FOR CORRUGATED STEEL 紧固件.波纹钢管用螺栓. PIPES. PART 3 : CONVEX 第 3 部分:不带法兰的凸形 HEXAGON NUTS WITHOUT 六角螺母.产品等级 C FLANGE. PRODUCT GRADE C.) (FASTENERS. BOLTS FOR CORRUGATED STEEL 紧固件.波纹钢管用螺栓. PIPES. PART 4 : CONVEX 第 4 部分:带法兰的凸形螺 HEXAGON NUTS WITH 母.产品等级 C FLANGE. PRODUCT GRADE C.) 螺栓、螺母及附件.术语 (Bolts, nuts and accessories.nomenclature.) HEAD NIB
紧固件.螺栓和螺钉的自 (Fasteners. Clearance hole for bolts and screws.) 由尺寸孔 (Mechanical properties of 碳钢合金制成的紧固件的 fasteners made of carbon steel 机械性能.第 1 部分:螺栓、 and alloy steel - Part 1 : bolts, 螺钉和螺柱 screws and studs.) (FASTENERS. SURFACE DISCONTINUITIES. PART 1 : SCREWS AND 紧固件.表面不连续性.第 BOLTS, FOR GENERAL 1 部分:一般要求的螺栓、 STUDS REQUIREMENTS. 螺钉和螺柱 (EUROPEAN STANDARD EN 26157-1).) (FASTENERS. SURFACE DISCONTINUTIES. PART 3 : 紧固件.表面不连续性.第 BOLTS, SCREW AND STUDS SPECIAL 3 部分:特殊要求的螺栓、 FOR REQUIREMENTS. 螺钉和螺柱 (EUROPEAN STANDARD EN 26157-3).) (Mechanical properties of 不锈钢紧固件耐腐蚀的机 corrosion-resistant 械特性.螺栓,螺丝和双端 stainless-steel fasteners. Part 1 : 螺栓 bolts, screws and studs.) (MECHANICAL PROPERTIES OF FASTENERS. PART 7 : 紧固件的机械性能.第 7 部 TORSIONAL TEST AND 分:公称直径 1-10mm 的螺 MINIMUM TORQUES FOR 栓和螺钉的扭力试验和最 BOLTS AND SCREWS WITH 小扭矩 NOMINAL DIAMETERS 1 MM TO 10 MM. (EUROPEAN STANDARD EN 20898-7).) 六角头螺栓.产品等级 A (Hexagon head bolts - Product grades A and B.) 和B 紧固件.六角头螺栓.B 级、 (Fasteners. Hexagon head bolts.