Power Supply S/N:
PHI031803JK
PCB Serial Number:
FAB0337240K,73-3122-04
-------------------------------------------------
1 user(s) now active on Management Console.
Reset system with factory defaults, [Y]es or [N]o? Y
% Invalid input detected.
#config t
Enter configuration commands, one per line. End
with CNTL/Z.
(config)#vlan 1 name vlan1
[M] Menus [K] Command Line [I] IP Configuration
Enter Selection:
PCA Number:
73-3122-04
PCA Serial Number:
FAB0337240K
Model Number:
WS-C1912-A
System Serial Number: FAB0339U01U
with CNTL/Z.
Router2621(config)#interface f0/1
Router2621(config-if)#ip
address
172.16.10.1
255.255.255.0
Router2621(config-if)#no shut
Router2621(config-if)#end
PCB Serial Number:
FAB0337240K,73-3122-04
-------------------------------------------------
1 user(s) now active on Management Console.
User Interface Menu
>en #delete nvram
This command resets the switch with factory defaults. All system parameters will revert to their default factory
settings. All static and dynamic addresses will be removed.
2、 实验报告内容：
1、Router2621的配置
Router2621 Con0 is now available
Press RETURN to get started.
Router2621>enable
Router2621#config t
Enter configuration commands, one per line. End
-------------------------------------------------
1 user(s) now active on Management Console.
User Interface Menu
[M] Menus [K] Command Line [I] IP Configuration
User Interface Menu
[M] Menus [K] Command Line [I] IP Configuration
Enter Selection:
PCA Number:
73-3122-04
PCA Serial Number:
FAB0337240K
Model Number:
WS-C1912-A
-----------------------------
-----------------
------------
1
1
2
1
3
1
4
1
5
1
6
1
7
1
8
1
9
1
10
1
11
1
12
1
AUI
1
Static
A
1
Static
B
1Static来自#config t Enter configuration commands, one per line. End with CNTL/Z. (config)#int e0/1 (config-if)#vlan-membership static 1 (config-if)#int e0/3
(config-if)#vlan-membership static 1
(config-if)#int e0/2
(config-if)#vlan-membership static 2
(config-if)#int e0/4
(config-if)#vlan-membership static 2
(config-if)#ctrl+z
%SYS-5-CONFIG_I: Configured from console by console
Router2621#copy running-config startup-config
Building configuration...
[OK] Router2621#
2、配置交换机1900A
PCA Number:
System Serial Number: FAB0339U01U
Power Supply S/N:
PHI031803JK
PCB Serial Number:
FAB0337240K,73-3122-04
-------------------------------------------------
-------------------------------------------------
1 user(s) now active on Management Console.
User Interface Menu
[M] Menus [K] Command Line [I] IP Configuration
Enter Selection:
PCA Number:
73-3122-04
PCA Serial Number:
FAB0337240K
Model Number:
WS-C1912-A
System Serial Number: FAB0339U01U
Power Supply S/N:
PHI031803JK
Reset system with factory defaults, [Y]es or [N]o? Y
% Invalid input detected.
#config t Enter configuration commands, one per line. End with CNTL/Z. (config)#hostname 1900A 1900A(config)#^Z %SYS-5-CONFIG_I: Configured from console by console 1900A#config t Enter configuration commands, one per line. End with CNTL/Z. 1900A(config)#ip address 172.16.10.3 255.255.255.0 1900A(config)#ip default-gateway 172.16.10.1
(config)#vlan 2 name vlan2
(config)#exit
%SYS-5-CONFIG_I: Configured from console by console
#show vlan-membership
Port VLAN Membership Type
Port VLAN
Membership Type
#show
% Type 'show ?' for a list of subcommands
#
73-3122-04
PCA Serial Number:
FAB0337240K
Model Number:
WS-C1912-A
System Serial Number: FAB0339U01U
Power Supply S/N:
PHI031803JK
PCB Serial Number:
FAB0337240K,73-3122-04
Address
Dest Interface Type
Source Interface List
---------------------------------------------------
-------------------
1900A#
3、配置VLAN：
PCA Number:
73-3122-04
1 user(s) now active on Management Console.
User Interface Menu
[M] Menus [K] Command Line [I] IP Configuration
Enter Selection:
CLI session with the switch is open. To end the CLI session, enter [Exit].
昆明理工大学信息工程与自动化学院学生
实验报告
（ 2010 — 2011 学年第 二
学期 ）