3 Installing the hardware that I manually select from
a list (Advanced).
3
4
4 Network Adapters
5 Microsoft – Microsoft Loopback Adapter
5
Page 1 of 5
Start – Setting – Control Panel – Network Connection. Setting the virtual net card.
9 AlmList.exe
Alarm list
10 FigView.exe
Figure view
11 AlmAction.exe
Alarm action
12 PrtRpt.exe
To print history report
13 NTPDiag.exe
NTP diagnostics
14 EgdMonitor.exe ????
18 Save current setting
12 13
9
10
17 16
18
14 11
Page 4 of 5
Close MPC
Restart MPC
19 Click “Diagnostic” icon to popup the diagnostic map. Now there are 4 DPUs (1, 2, 16, 17) and 1 HMI (81) in the system.
5 TagList.exe
To list the global database
6 Trend.exe
To display a group of Trend
7 TagInfo.exe
To query a point from the
global database
8 AlmHist.exe
1
Alarm history
8 Insert a new HMI (81)
9
10 Insert 4 new DPU pairs 11 (1, 2, 16, 17)
8
12 System – Save System setting
13 Click “Download System
14 Setting”, Download to HMI81
6 Properties
7 Internet Protocol (TCP/IP)
8 Use the following IP address
Tips: The virtual network adapter is an useful tool for OC6000e software learning and tuning.
EGD status monitor
Task C: HMI 配置和系统配置
23
4 5 6 7 8 9 10 11 12 13
1 Set IP address to be
4
consistent with the virtual
network adapter IP
address.
2
2 Set node # to be
Task A: 安装和配置微软 Loopback adapter (虚拟网卡适配器).
Start – Setting – Control
Panel – Add Hardware
1
1 Yes. I have already
connected the hardware.
2
2 Add a new hardware device.
6 Click SystCFG, implement system configuration and HMI configuration.
OC6000e HMI software example installation 5
System configuration
7 UDH-Insert New
7
consistent with the last
part of IP
(Recommended).
1
3 Save the current Setting.
4 Close MPC.
3
Page 3 of 5
Restart MPC.
6
5 The main HMI No. is same with the current HMI No. This means the MPC has connected with HMI81’s network.
Task B: HMI 软件安装
Install OC6000e HMI software.
1 Setup.exe English version with
2 sample data
Default installin源自 path – 3 D:\OC_6000e
4 Finish
OC6000e HMI software example installation
8 7 6
2 1
3
4
5 Start MPC.exe
“Main HMI No.” is 65535. This means that MPC does not connect to the HMI network.
Page 2 of 5
OC6000e HMI software example installation
HMI configuration, startup items
15
15 Click “Startup”
16 Right button menu, click “Add”
17 Set the automatic startup items that will be started automatically when we start MPC. Now we set 4 items, i.e., starting 4 VDPUs.
OC6000e HMI software example installation
HMI 软件安装指导
描述 本练习的目的是通过分步骤练习帮助学员熟悉 HMI 软件的安装 任务
a. 安装和配置微软 Loopback adapter (虚拟网卡适配器). b. HMI 软件安装. c. HMI 配置和系统配置.
OC6000e HMI software example installation 19
Page 5 of 5
Application files under D:\OC_6000e
1 MPC.exe
HMI software console
2 SystemCFG.exe
System configuration
3 FigEdit.exe
Figure editor
4 Diagnostics.exe
System diagnostics