ZLB型轴流泵
Type ZLB Axial Flow Pump
ZLB.ZLD型泵系单级立式轴流泵，适用于抽送清水、污水、雨水及带有轻微腐蚀性的液体，被输送液体温度不高于50°C。

本型泵是大流量、低扬程泵，可适用于农田排灌、水利工程、城市的供水、排水和污水处理，电厂、盐厂及养殖场输送循环水、船坞升降水位，亦可用于冶金、化工等行业，使用十分广泛。

ZLB、ZLD pumps are single-stage vertical axial flow pumps.They are provided for delivering clear water,sewage,rainwater and other liquid with slight corrosive.The highest temperature of the liquid is not allowed more than50℃.They have the features of large capacity and low head.They are widely used for agriculture irrigation,water conservancy,water supply& drainage of civil engineering and farmlands,pollution treatment as well as used in salt factories, raise,power stations,docks for water lifting and falling,metallurgy and chemical industry,etc.
流量:0.5—60m3/s
扬程: 2.0—15m
Capacity Q:0.5~60m3/s
Head H: 2.0~15m
500ZLB-6.3
500—泵的吐出口径(mm)
Z—轴流泵
L—立式
B—半调节叶片（D为固定叶片）
6.3—泵的设计点扬程(m)
500ZLB-120
500—泵的吐出口径(mm)
Z—轴流泵
L—立式
B—半调节叶片（D为固定叶片）
120—泵的比转数(÷10)
Example1500ZLB-6.3
500—Outlet diameter of pump(mm)
Z—Axial flow pump.
L—Vertical.
B—Blades adjustable when stationary(D—fixed blades).
6.3—Head at design point(m).
Example2500ZLB—120
500—Outlet diameter of pump(mm)
Z—Axial flow pump.
L—Vertical.
B—Blades adjustable when stationary(D—fixed blades).
120—Pump specific speed(÷10)
泵轴均为立式安装,吸入口垂直向下,吐出口水平伸出，泵和电机分别安装在两个基础层，泵的轴向推力由电机承受，泵的轴承为橡胶导轴承，密封为填料密封。

The pump is vertically installed with the inlet vertical downward and the outlet horizontal extending.The pump and the motor are mounted on separate foundation.The axial thrust of
the pump is carried by the motor.The pump adopts rubber guiding bearings.The seal usually uses packing seal.
泵轴为优质碳素钢
叶轮为铸钢或不锈钢
其余为铸铁或钢板焊接
Shaft:High-quality carbon steel.
Impeller:Cast steel or stainless steel.
Other parts:Cast iron or welding steel plate.
成套供应泵、电动机和底座或安装垫板。

订货时需注明叶轮所需材质，若有特殊要求，订货时可向公司提出具体的技术要求。

pump,motor and bedplate or mounting plate.Please give indication of the material of impeller in contract.If you have any special requirement,please contact us without hesitation.。