当前位置:文档之家› 水性氟碳涂料的性能和技术要求

水性氟碳涂料的性能和技术要求

Safety
Precautions
安全措施
The product must be used in painting area by professionals. When painting, please be sure to refer to Product Data Sheet and MSDS. Consult our company if consumers could not completely understand the precautions for safety and health when applying the product.
Storage贮存期One year一年
Drying time
干燥时间
Substrate
Temperature
底材温度,℃
Touch Dry
表干
(min)
Hard Dry
硬干
(h)
Over coating Interva
25
≤30
≤8
3h
Not limit
Storage and
NOTICE: If consumers have not taken effective safety precautions (Refer to the specification), our company will NOT be responsible for any accident.
本产品必须由专业人员在工业场所使用。使用时请务必参照本说明书以及相关健康安全手册。若客户在使用本产品前,未能详细了解本产品的相关健康安全知识,请与本公司人员联系。该涂料为溶剂型涂料,为避免事故或危险发生,应采取最低限度的安全措施如下:
The surface which was coated before: clean, dry, and please be sure if the coat is permitted or not。
The surface of the concrete: no water, no oil etc……
Product
Description
产品简介
各色,有光或哑光,水性双组份环氧面漆,漆膜附着力强,耐磨性佳,具有良好的耐化学品
性,可抵抗盐雾及中度的酸、碱、盐。以水为分散介质,不然不爆,可用水稀释和清洗涂装
用具,施工过程无污染,具有安全环保特性。
A series of colors, dark or bright, two-package water-miscible epoxy finish, the adherence, the rub-resist, the solvent-resist is good. It resists the salt fog, and acid, alkali, salt. It is dispersed by water, resist fire and burst, can be diluted or cleaned by water. No pollution, safety and environmental protection.
The paint contains volatile solvent and it is flammable, So must keep away from sparks and open flames. No smoking at workplace, Effective precautions (such as using explosion-proof electrical equipments. No static electricity accumulation or metal collision etc) also should be done so as to avoid product sparks.
B:2Kg in 2.5 liter container乙:2公斤装于2.5公升容器中
Flash Point闪点No无
Specific Gravity比重1.10-1.20Kg/L 1.10-1.20公斤/公升
Specification and
Surface preparation
技术要求及表面处理
Enough ventilation is necessary at application sites. In order to remove any danger of explosion, must keep the ratio of gas / air is less than 10 %, Usually 200 m3of ventilation quantity per 1 Kg solvent (according to the solvent) is necessary, it canMaintain the minimum explosive limit. Take effective precautions to prevent skin and eye contact with the coating (such as the use of overalls, gloves, goggles, face shields and protective oil coating and so on). If paint gets in touch with skin,If accidental skin contact with the product, please use fresh water and soap or an appropriate industrial cleaning agents thoroughly cleansed. In case of eyes being contaminated, rinse with fresh water for 10 min at least and give medical treatment immediately.During painting, it is recommended to wear face shields to prevent inhalation of paint mist and harmful gases.Especially in poorly ventilated environment, it is more necessary.Finally, be handled with care so as not to waste paint barrels of pollution of the environment.
水性氟碳涂料的性能和技术要求
Intended Uses
用途
适用于各种及恶劣环境下钢结构或建筑外墙的高性能防护和装饰面漆,涂层可以在-50-150℃下长期使用。
Suited for steel structure or exterior walls in various abominable conditions as high functional protective and decorative finish, The coat can be used at the temperature condition within -50-150℃for a long time.
Handling
贮存与管理
Storage贮存Store in cool and dry conditions ( 5-40℃),no exposing to frost
贮存在5-40℃之间的凉爽干燥环境之中,不得暴露于霜冻环境。
Pack size包装规格A;20Kg in 20 liter container甲:20公斤装于20公升容器中
Substrate temperature should be more than 3℃above the dew point, enough ventilation is necessary at the application site.
The front coatings: water-miscible or others paint which is permitted.
The product is a kind of solvent-based paint. In order to avoid the accident or dangerous occurrence, minimal safety precaution, as follow, should be down.
The durability of the water-miscible paint is decided by the condition of the application, For example, on the edge and quarter, the application need be handled carefully, avoiding the film thickness is too thick once
已涂漆的表面,确保是许可的涂层,并保证表面清洁干燥
混凝土表面:无可见水,无油污等污物
Limitations
限制
Please mix and stir still to even before application, during the application, the temperature of the environment should be above 10℃, the relative humidity should be less than 80%, the
Brush or Roller涂刷或辊涂Recommended推荐采用
Conventional Spray传统喷涂Not Recommended不推荐采用
Thinner稀释剂清洁淡水(Clean water)
相关主题