VES
Marking color: Black
SPECIFICATIONS
Items Category Temperature Range Capacitance Tolerance Leakage Current (at 20℃) Dissipation Factor (Tanδat 120Hz, 20℃) Performance -55℃ ~ +105℃ ±20% I = 0.01CV or 3 (μ A) whichever is greater (after 2 minutes) Where, C = rated capacitance in μF V = rated DC working voltage in V Rated Voltage Tanδ(max) 6.3 0.30 10 0.26 16 0.22 25 0.16 35 0.13 50 0.12
L 0.3 Max
P C±0.2
MARKING
Negative polarity Date code Rated cap. Rated voltage & Series code
a1 10 16S
Wห้องสมุดไป่ตู้
φD 4 5 6.3
L 5.3 ± 0.2 5.3 ± 0.2 5.3 ± 0.2
A 4.3 5.3 6.6
SMD Aluminum Electrolytic Capacitors
Features ‧ 4 ~ 6.3φ, 105℃, 1,000 hours assured ‧ Vertical chip type miniaturized for 5.5mm high capacitor ‧ Designed for surface mounting on high density PC board ‧ RoHS Compliance
B 4.3 5.3 6.6
C 5.1 6.1 7.4
A± 0.2
2011 Verison
SMD Aluminum Electrolytic Capacitors
DIMENSION & PERMISSIBLE RIPPLE CURRENT
V. DC
µF 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 Contents 0R1 R22 R33 R47 010 2R2 3R3 4R7 100 220 330 470 101 4×5.3 5×5.3 5×5.3 6.3×5.3 21 30 36 61 4×5.3 5×5.3 5×5.3 6.3×5.3 6.3×5.3 15 25 31 43 65 4×5.3 5×5.3 6.3×5.3 6.3×5.3 6.3×5.3 16 28 40 47 70 4×5.3 5×5.3 6.3×5.3 6.3×5.3 6.3×5.3 12 21 36 44 60 4×5.3 5×5.3 6.3×5.3 14 23 50
2011 Version
VES
Dimension: φD × L(mm) Ripple Current: mA/rms at 120 Hz, 105°C
25V (1E)
φD×L mA
6.3V (0J)
φD×L mA
10V (1A)
φD×L mA
16V (1C)
φD×L mA
35V (1V)
φD×L mA
50V (1H)
φD×L 4×5.3 4×5.3 4×5.3 4×5.3 4×5.3 4×5.3 4×5.3 5×5.3 6.3×5.3 6.3×5.3 mA 2 3 4 5 7 10 12 17 26 51
Shelf Life Test
Ripple Current & Frequency Multipliers
DIAGRAM OF DIMENSIONS
φD±0.5
B± 0.2
LEAD SPACING AND DIAMETER
0.4 max
Unit: mm
P ± 0.2 W 0.5 ~ 0.8 1.0 0.5 ~ 0.8 1.5 0.5 ~ 0.8 2.0
(at 120Hz, 20℃)
Low Temperature Characteristics (at 120Hz)
Impedance ratio shall not exceed the values given in the table below. 6.3 10 16 25 Rated Voltage 4 3 2 2 Impedance Z(-25℃)/Z(+20℃) 8 5 4 3 Ratio Z(-55℃)/Z(+20℃)
35 2 3
50 2 3
Endurance
Test Time 1,000 Hrs Capacitance Change Within ±20% of initial value Dissipation Factor Less than 200% of specified value Leakage Current Within specified value * The above specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage applied for 1,000 hours at 105℃. Test Time 1,000 Hrs Capacitance Change Within ±20% of initial value Dissipation Factor Less than 200% of specified value Leakage Current Within specified value * The above specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Frequency (Hz) Multiplier 50 0.7 120 1.0 1k 1.3 10k up 1.4