Expect otherwise provided for this local agreement, the parties agreed to be bound by all terms and conditions of the master agreement entered into between x and y on as if it were incorporated herein.
If there is any conflict between this local agreement and the master agreement, this local agreement shall prevail.
This purchase order shall be subject to the terms and conditions of the seller as amended from time to time.
Except for the articles x y and z, this LoI shall have no legal bounding force upon the parties.
序言常用词
This contract is made on the xx day of xx, 2006 at xx by and between the following parties:
X co., a limited liability company incorporated under the laws of the PRC, with its registered address at xx hereinafter referred to as party a, and
Y co.,
Party A and Party B are hereinafter referred to as a Party individually and as Parties collectively. 如果是多方
This Agreement (hereinafter referred to as “Agreement”) is made and entered into in xxplace as of the date by and between:
Xx company, established and existing under the law of , having its headquarters domiciled in Beijing, the PRC hereinafter referred to as Party A as one party,
Xx
Party A, Party B and Party C may be referred to as a Party individually and Parties collectively. This agreement shall take effect on the date of ~~
This agreement shall be effective retroactively to the November 12th, 2007 and shall continue in full force and effect until earlier termination in accordance with section 7 termination.
Recital
Whereas party a and party b signed a memorandum of understanding dated xx agreeing to start friendly discussion on establishing a joint venture to jointly develop the project.
Whereas party a and party b reached initial agreement on establishing a joint venture to jointly develop the project and signed the joint venture heads of agreement on june 1…
Whereas party a and party b have agreed to establish a joint venture according to terms and conditions of this joint venture contract to jointly develop the project.
NOW THEREFORE, it is agreed by both parties as follows
Both parties agree as follow
In consideration of the mutual promises and undertakings contained in this agreement, the parties agree as follows.
Definition~
In this agreement, where the context admits, the following expressions shall have the following meanings ```
The following expressions shall have the following meanings unless otherwise expressly required. The following words and terms used in the agreement shall have, unless otherwise specified herein, the following meanings
The following words and expressions shall have the meaning stated in this contract, except where the context requires otherwise
Unless the context otherwise requires, the following words and or expressions shall have the
following meanings.
Unless the context requires otherwise, the words appearing in this agreement in full capital means the following:
支付条款
Buyer shall pay the contract price to party b within 60 days after the receipt of party b.
EPC
The definitions set forth in Article 1 of the EPC (Engineering, Procurement and Construction) Contract are equally applicable to this Design agreement and shall have the same meanings ascribed to them in the EPC contract unless otherwise defined in this design agreement.
关联公司
Affiliate means a company which, directly or indirectly through one or more intermediaries, controls or is controlled by, or is under common control with a party or a subcontractor of a party. For this purpose control means the direct or indirect ownership of in aggregate fifty percent or more of voting capital.
Heading
All Headings and titles used in this agreement are for convenience only. They are not to be used in the interpretation or construction of this agreement.
No heading, index, title, sub-title, or sub-heading of this agreement shall limit, alter or affect the meaning or operation of this agreement.
效力
In the event of ambiguity or conflict between any of the documents in the purchase order, they shall be given precedence in the following order~~
The Parts, Schedules, Appendices and any other documents referred to in this purchase order shall be taken, read and construed as an essential and integral part of this agreement.
In the event of any inconsistency between the terms of the main body of this agreement and the schedules to this agreement the terms of the main body of this agreement shall take precedence. Representation and warranty
Party A represents and warrants that
1 it is duly incorporated with limited liability and validly exists under the laws of xx
2 it has corporate power and has taken all necessary corporate and other action to enter into and complete this agreement.
Each Party hereby represents and warrants that
This agreement has been duly executed and delivered on its behalf and constitutes its legal, valid, binding and enforceable obligation, except to the extent that enforceability may be limited by applicable bankruptcy, insolvency or other similar laws affecting the enforcement of creditor rights.
There are no existing arrangements or agreements with third parties, the terms of which prevent the Parties from entering into this agreement or which would impede the performance of its obligations under the agreement.
Party b represents and warrants that it has full power and authority to enter into, perform and comply with its obligations under this agreement; this agreement has been duly executed and delivered by Party B and, subject to the approval by the government authorities constitutes legal, valid, binding and enforceable obligations of party a in accordance with this terms.
Each party represents and warrants that
国际技术咨询服务合同（中英文） Technical Consultancy Service Contract 合同号：Contract No________________ 签订日期：Date of Signature:________________ 签订地点：Place of Signature:________________ 中国____________公司（以下简称委托方）为一方，______国______________ 公 司（以下简称为咨询方）为另一方，双方就_____________的技术咨询服务，授权双方代表按下列条款签订本合同。 This Contract is made and entered into through friendly negotiation by and between China____________________ (hereina fter referred to as “Client”), as one party, and____________________ (hereinafter referred to as“Consultant”),as the other party, concerning the technical consultancy service of__________, under the following terms and conditions: 第一条合同内容 Article 1 Contents of Technical Consultancy Service 1.1 委托方希望获得咨询方就_____提供的技术咨询服务，而咨询方愿意提供此项服务。 Whereas Client desires to obtain the technical consultancy service of from Consultant and Consultant has agreed to perform such services. 1.2 技术咨询服务范围详见本合同附件一。 The Scope of Technical Services is defined in Appendix 1. 1.3 技术咨询服务的进度安排详见本合同附件二。 The Time Schedule for the Services is shown in Appendix 2. 1.4 技术咨询服务的人员安排见本合同附件三。 The Manning Schedule is described in Appendix 3. 1.5 技术咨询服务自合同生效之日起_____个月内完成，将在_____个月内提交最终技术咨询报告，包括图纸、设计资料、各类规范和图片等。咨询方应免费通报委托方类似工程的最近发展和任何进展，以便委托方能改进该工程的设计。 Consultant shall complete the Services within__________months from the Effective Date of this Contract and furnish the final technical service report, including drawings, designing documents, all kinds of standards and photos, within____months. Consultant shall keep aware, free of charge, Client of the latest development of similar projects and any progress made in order to improve the designing of the project.
contract英文合同大全 买方 buyer 卖方 seller 项目名称 Project name 地址 address 电话 phone 本合同由买卖双方签订，根据本合同条款，买方同意购买，卖方同意出售以下产品。 This contract is made by and between the buyers and sellers, whereby the buyers agree to buy and the sellers agree to sell the under-mentioned. Commodities according to the terms and conditions stipulated below. 1.详细货物清单 Detail supply list 2.合同价格 Contract value 序号 item型号 model尺寸 size, dimension数量 amount, unit单价 unit price总价 total price备注 remark货物，运费 freight, transportation合同总额（含安装费与税金） Contract amount incl. VAT installation 3.付款条件 payment conditions, payment terms 4.交货地点 delivery place 5.发货期 delivery time 6.安装条款 installation clause 7.验收条款 inspection clause 8.保证条款 guarantee clause 9.不可抗拒条款 Force Majeure Clause 10.违约条款 Breach clause 11.其他条款 Miscellaneous clause 12.买卖双方信息 buyer and seller information 此合同一式二份，由双方各持一正本。This contract is made in two originals that should be held by each party. 涉外合同格式 涉外合同按繁简不同，尽管可以采取不同书面形式，如正式合同（Contract）、协议书（Agreement）、确认书（Confirmation）、备忘录（Memorandum）、订单（Order）等等，但
销售合同 SALES CONTRACT 编号：Contract No: 日期: Date: 签约地点：Signed at: 卖方：Sellers: 地址：Address: 邮政编码：Postal Code: 电话：Tel:传真：Fax: 买方：Buyers: 地址：Address: 邮政编码：Postal Code: 电话：Tel:传真：Fax: 兹确认售予买方下列货品，其成交条款如下： The Seller hereby confirms selling the following goods on terms and conditions (3)公差：数量及总值均有_____%的增减,由卖方决定 Tolerance: With _____% more or less both in amount and quantity allowed at the sellers option. (4) 原产地
Country of Origin: (5) 付款方式：30%预付，70%发货前一周付清 Payment terms: 30% deposit, 70% payment within one week before delivery. (6) 交货时间：收到预付款后15天内完成装运。 Time of shipment: Within15 days after deposit received. (7) 贸易方式：FOB Shanghai Terms of Shipment: FOB Shanghai (8) 包装：胶合板木盘外封铁皮 Packing：Plywood drum with steel sheet cover. (9) 保险：由卖方按发票全额110%投保至_____为止的_____险。 Insurance：To be effected by seller for 110% of full invoice value covering _____ up to _____ only. (10) 装运口岸：中国上海港 Port of Loading: Shanghai Port, China (11) 转运：允许 Transshipment: Allowed (12) 分批装运：允许分批装运 Partial Shipment: Allowed (13) 目的口岸： Port of Destination: (14) 唛头：Shipping Marks： (15) 单据：Documents： (16) 品质与数量、重量的异义与索赔：Quality/Quantity Discrepancy and Claim： (17) 逾期发运：如果由于买方原因造成逾期发运，买方承担责任。造成自签订合同之日起超过45天不能发运的，卖方将每日按货物金额的3%收取保管费；如果由于买方原因造成逾期发运超过6个月，卖方有权自行处置定金和货物。如果是卖方原因造成的逾期
英文技术服务合同范本 Contract No.:________________________. Date of Signature:____________________. Place of Signature:____________________. This Contract is made and entered into through friendly negotiation by and between China____________________ (hereinafter referred to as “Client”), as one party, and____________________ (hereinafter referred to as“Consultant”),as the other party, concerning the technical consultancy service of__________, under the following terms and conditions: Article 1 Contents of Technical Consultancy Service 1.1 Whereas Client desires to obtain the technical consultancy service of from Consultant and Consultant has agreed to perform such services. 1.2 The Scope of Technical Services is defined in Appendix 1. 1.3 The Time Schedule for the Services is shown in Appendix 2. 1.4 The Manning Schedule is described in Appendix 3. 1.5 Consultant shall complete the Services within__________months from the Effective Date of this Contract and furnish the final technical service report, including drawings, designing documents, all kinds of standards and photos, within____months. Consultant shall keep aware, free of charge, Client of the latest development of similar projects and any progress made in order to improve the designing of the project.
编号：_____________ 国际技术咨询服务合同 委托方：___________________________ 咨询方：___________________________ 签订日期：_______年______月______日
中国________________________公司（以下简称委托方）为一方，_____国 __________________________ 公司（以下简称为咨询方）为另一方，双方就 _________________________的技术咨询服务，授权双方代表按下列条款签订本合同。 This Contract is made and entered into through friendly negotiation by and between China_________________________ (hereinafter referred to as “Client”)， as one party， and__________________________ (hereinafter referred to as“Consultant”)，as the other party， concerning the technical consultancy service of________________________， under the following terms and conditions: 第一条合同内容 Article 1 Contents of Technical Consultancy Service 1.1 委托方希望获得咨询方就___________________________提供的技术咨询服务，而咨询方愿意提供此项服务。 Whereas Client desires to obtain the technical consultancy service of from Consultant and Consultant has agreed to perform such services. 1.2 技术咨询服务范围详见本合同附件一。 The Scope of Technical Services is defined in Appendix 1. 1.3 技术咨询服务的进度安排详见本合同附件二。 The Time Schedule for the Services is shown in Appendix 2. 1.4 技术咨询服务的人员安排见本合同附件三。 The Manning Schedule is described in Appendix 3.
合同 CONTRACT 日期：合同号码： Date: Contract No.: 买方：(The Buyers) 卖方：(The Sellers) 兹经买卖双方同意按照以下条款由买方购进，卖方售出以下商品： This contract is made by and between the Buyers and the Sellers; whereby the Buyers agree to buy and the Sellers agree to sell the under-mentioned goods subject to the terms and conditions as stipulated hereinafter: (1) 商品名称: Name of Commodity： (2) 数量： Quantity: (3) 单价： Unit price: (4) 总值： Total Value: (5) 包装： Packing: (6) 生产国别： Country of Origin : (7) 支付条款： Terms of Payment: (8) 保险： Insurance: (9) 装运期限： Time of Shipment: (10) 起运港： Port of Lading:
(11) 目的港： Port of Destination: (12)索赔：在货到目的口岸45天内如发现货物品质，规格和数量与合同不符，除属保险公司或船方责任外，买方有权凭中国商检出具的检验证书或有关文件向卖方索赔换货或赔款。 Claims: Within 45 days after the arrival of the goods at the destination, should the quality, Specifications or quantity be found not in conformity with the stipulations of the contract except those claims for which the insurance company or the owners of the vessel are liable. The Buyers shall, have the right on the strength of the inspection certificate issued by the C.C.I.C and the relative documents to claim for compensation to the Sellers. (13)不可抗力：由于人力不可抗力的原由，发生在制造、装载或运输的过程中导致卖方延期交货或不能交货者，卖方可免除责任。在不可抗力发生后，卖方须立即电告买方及在14天内以空邮方式向买方提供事故发生的证明文件，在上述情况下，卖方仍须负责采取措施尽快发货。 Force Majeure: The sellers shall not be held responsible for the delay in shipment or non-deli-very of the goods due to Force Majeure, which might occur during the process of manufacturing or in the course of loading or transit. The sellers shall advise the Buyers immediately of the occurrence mentioned above the within fourteen days there after. The Sellers shall send by airmail to the Buyers for their acceptance certificate of the accident. Under such circumstances the Sellers, however, are still under the obligation to take all necessary measures to hasten the delivery of the goods. (14）仲裁：凡有关执行合同所发生的一切争议应通过友好协商解决，如协商不能解决，则将分歧提交中国国际贸易促进委员会按有关仲裁程序进行仲裁，仲裁将是终局的，双方均受其约束，仲裁费用由败诉方承担。 Arbitration: All disputes in connection with the execution of this Contract shall be settled friendly through negotiation. In case no settlement can be reached, the case then may be submitted for arbitration to the Arbitration Commission of the China Council for the Promotion of International Trade in accordance with the Provisional Rules of Procedure promulgated by the said Arbitration Commission. The Arbitration committee shall be final and binding upon both parties. And the Arbitration fee shall be borne by the losing parties.
合同编号：YT-FS-8920-88 英文版合同范本 Clarify Each Clause Under The Cooperation Framework, And Formulate It According To The Agreement Reached By The Parties Through Consensus, Which Is Legally Binding On The Parties. 互惠互利共同繁荣 Mutual Benefit And Common Prosperity
英文版合同范本 备注：该合同书文本主要阐明合作框架下每个条款，并根据当事人一致协商达成协议，同时也明确各方的权利和义务，对当事人具有法律约束力而制定。文档可根据实际情况进行修改和使用。 contract no: date: the buyer: the seller: the contract, made out, in chinese and english, both version being equally authentic, by and between the seller and the buyer whereby the seller agrees to sell and the buyer agrees to buy the undermentioned goods subject to terms and conditions set forth hereinafter as follows: 1 name of commodity and specification 2 country of origin & manufacturer 3 unit price (packing charges included)
编号：_____________技术服务合同 甲方：___________________________ 乙方：___________________________ 签订日期：_______年______月______日
项目名称： project name： 签订时间： Signing time： 签订地点： Signing location： 委托方（甲方）： consignor： 电话： Tel： 通讯地址： Adress： 传真： Fax: 受托方（乙方）： Consignee: 通讯地址： Adress： 电话： Tel: 本合同甲方委托乙方就项目进行专项技术服务，并支付相应的技术服务报酬。双方经过平等协商，在真实、充分地表达各自意愿的基础上，根据《中华人民共和国合同法》的规定，达成如下协议，并由双方共同恪守。
JingQi bio-nanotechnology . Technical service remuneration. Two parts agree as follows according to the provisions of the contract law of the People's Republic of China ， on the basis of fully express their will. 第一条甲方委托乙方进行技术服务的内容如下 The content of the technical service 技术服务的内容： Content: 乙方应按下列要求完成技术服务工作 complete technical services as required 1．技术服务地点： Location of technical service： 2．技术服务期限：个月 Technical service period： 第二条为保证乙方有效进行技术服务工作，甲方应当向乙方提供下列工作条件和协作事项 JINGQI should offer some working conditions to assure RU could complete the job perfectly 1．提供技术资料； Provide technical information 2．提供工作条件； Provide work condition
协议编号：LX-FS-A36339 技术合同英文标准范本 After Negotiation On A Certain Issue, An Agreement Is Reached And A Clause With Economic Relationship Is Concluded, So As To Protect Their Respective Legitimate Rights And Interests. 编写：_________________________ 审批：_________________________ 时间：________年_____月_____日 A4打印/ 新修订/ 完整/ 内容可编辑
技术合同英文标准范本 使用说明：本协议资料适用于经过谈判或共同协商的某个问题，在取得一致意见后并订立的具有经济或其它关系的契约条款，最终实现保障各自的合法权益的结果。资料内容可按真实状况进行条款调整，套用时请仔细阅读。 合同contract 日期：合同号码： date: contract no.: 买方：(the ;buyers) 卖方：(the sellers) 兹经买卖双方同意按照以下条款由买方购进，卖方售出以下商品： this contract is made by and between the buyers and the sellers; whereby the buyers agree to buy and the sellers agree to sell the under-mentioned goods subject to the terms and conditions as stipulated hereinafter:
维护服务合同 The maintenance service contract 根据《中华人民共和国合同法》等相关的法律和法规，委托方和受托方本着平等互利，等价有偿，诚实信用的原则，在协商一致的基础上签订本合同，就委托方的服务事宜，达成以下协议。 This contract was made, with the principal of mutual benefit and good faith, in accordance with the “Contract Law of the PRC”and related law, regulation and/or interpretations, by and between the entrusting party and trustee, subject to the services that provided hereunder. 一、服务范围和服务时间、服务条款、合同金额 Ⅰ, Scope of services, Business Hours, Service Items and Contract Value 1、受托方负责对附件一的服务产品清单，按合同约定在服务期间内完成技术服务。 The trustee shall, within the agreed service period hereof, be responsible for complete the technical services that exhibit in Appendix 1 2、受托方将按照合同附件一约定的服务条款标准在合同约定期限内，提供合同所列的服务。 The trustee shall, in accordance with service standard of the Appendix 1 of this contract and within the agreed contract period, provide the listed service. 3、合同附件一：服务产品清单及服务条款，是本合同不可分割的一部分。Appendix 1: Product list and service items shall be deemed as an integral part of this contract. 4、服务合同总金额为￥_______ 元，大写：人民币________元整，此价格为包括服务费、差旅费、人工费、税费等项费用的最终价格。 the total amount of this service contract is ￥________ (RMB _______ only), this amount is all-in prince and shall include but not limited service fees, travel expenses, labor cost, taxes and other expenses. 二、双方的义务 Ⅱ, the obligations of the parties 委托方的义务 Entrusting Party’s obligation 1、当故障发生时，须以书面或电话、邮件形式向受托方提供详细的故障说明，以帮助受托方人员作出正确的故障判断。 Whenever the failure happens, the entrusting party shall use written notice, telephone or email inform trustee with detailed failure explanations; to convenient the trustee make correct resolve solution. 3、为受托方实施服务提供必要的人员、场地和其他环境安排。 The entrusting party shall, for the convenient of trustee, provide the necessary personnel, venues and other environmental arrangement. 受托方的义务 The Trustee's Obligations
买方 The Buyer: 地址 Address Tel: Fax: 卖方 The Seller: 地址： Address Tel: Fax: 本合同由买卖双方订立，根据本合同规定的条款，买方同意购买，卖方同意出售下述商品：This Contract is made by and between the Buyers and Sellers, whereby the Buyers agree to buy and the Sellers agree to sell the under-mentioned commodity according to the terms and conditions stipulated below: (1) 货名及规格 Commodity & Specification (2) 数量 Qty. (3) 单价 Unit Price (4) 总价Total Amount (5) 原产公司：COUNTRY OF ORIGIN : (6) 装运期限：TIME OF SHIPMENT: (7) 装运口岸：PORT OF SHIPMENT： (8) 到货目的地：DESTINATION： (9) 保险： INSURANCE： 由卖方按合同金额110％投保一切险和战争险 All Risks and War Risk for 110% contract value to be covered by the Seller. (10) 运输方式：TERM OF SHIPMENT: 空运 By air (11) 包装：PACKING：
须用坚固的新木箱包装，适合长途空运/陆运，防湿、防潮、防震、防锈、耐粗暴搬运。由于包装不良所发生的损失，由于采用不充分或不妥善的防护措施而造成的任何锈损、破损，卖方应负担由此而产生的一切费用和损失。包装箱内应包含一整套服务操作手册。卖方使用的木质包装应经薰蒸处理，并在木质包装表面标上清晰的IPPC标识。 To be packed in new strong wooden case(s) suitable for long distance air/land transportation and well protected from dampness, moisture, shock, rust and rough handling. The Sellers shall be liable for any damage to the goods on account of improper packing and for any rust damage and break damage attributable to inadequate or improper protective measures taken by the Sellers, and in such case or cases any and all losses and / or expenses incurred in consequence thereof shall be borne by the Sellers. One full set of service and operation manuals concerned shall be enclosed in the case(s). The wood packaging the Seller used shall be fumigated and marked with “IPPC” on the surface of wood packaging. (12) 唛头：SHIPPING MARK: 卖方应在每件包装上，用不褪色油墨清楚地标刷件号、尺码、毛重、净重、“此端向上”、“小心轻放”、“切勿受潮”等字样，并刷有下列唛头: On the surface of each package, the package number, measurements, gross weight, net weight, the lifting positions, such cautions as “THIS SIDE UP”, “HANDLE WITH CARE”,“KEEP AWAY FROM MOISTURE” and the following shipping mark: (13) 付款条件：TERMS OF PAYMENT： 100%的合同金额通过电汇支付。100% contract value by T/T. 买方在合同生效后两周内支付合同金额的100%货款 The Buyer shall pay 100% advance payment to the Seller within two week after contract effected. (14) 单据：Documents, 1. 正本空运单（收货人联），标明“运费已付”及唛头，买方为收货人及通知方。 Original Airway Bill (copy for Consignee) marked “freight prepaid” and shipping mark, consign to and notify the Buyer. 2. 涵盖100%合同金额的商业发票三正三副，注明合同号、唛头。
Employment Contract 年月___ 日
1 Contract partners 合同双方 Company Flugger Coatings (Shanghai) Co. Ltd., (hereinafter referred to as “The Company”) a wholly foreign owned enterprise organized and existing under the laws of the P.R.C., with its legal address at Room 1806, Tomson International Trade Building, No. 1 Ji Long Road, Waigaoqiao Free Trade Zone, Shanghai, represented in this contract by Mr. Henrik Larsen 甲方业。法定地址: 。 在本合同中以先生为公司代表 Employee______ ______________ ___ (hereinafter referred to as “The Employee”), ID Number: 乙方___( 以下称作“乙方”) 身份证号码： 2 Employment雇佣关系 2.1 The Company hereby offers formal employment to the Employee, and the Employee hereby agrees to be employed by the Company, with the work area of technical support, in accordance with the terms and conditions set forth in this Contract, the Job Description and the Remuneration Scheme annexed to this Contract and the Employee Handbook. A clean release from the Employee's previous employer is required; otherwise the Company holds the right to revoke this offer. 依照本合同及其附属的工作描述与报酬表以及公司员工手册中所列的条款和要 求，甲方正式雇佣乙方，乙方同意接受雇佣。乙方的工作范围属于技术服务相 关的各种事务。乙方必须与前雇主完全脱离雇佣关系，否则甲方有权撤回要约。 3 Duration and probation period合同期和试用期 3.1 This Contract, signed by the Company and the Employee, shall continue from , for a period of years(hereinafter referred to as “The Term”), unless the Contract is earlier terminated in accordance with its provisions. 本合同由甲方和乙方共同签订。除非其因合同相关条款的规定而提前终止，合 同有效期（以下称为“合同期”）将从年月日起持续至年月日, 为期年。 3.2 The Employee shall be required to undergo a period of probation of 3 months. (Employees who renew contracts are exceptions if agreed to by the Company). 乙方应当履行为期三个月的试用期。（乙方经甲方同意续签合同的情况除外） 3.3 The Company may dismiss the Employee at any time during, or at the end of, the probationary period if the Company considers that the Employee's performance cannot satisfy the recruitment conditions or the standards in the job description during the probationary period. If the Company considers that the Employee's performance has been satisfactory during the probationary period, the Employee shall become a regular employee of the Company in accordance with the terms of this Contract, and the probation period will be within the contract term.
Technology Development Contract 技术开发（委托）合同 Contract No.: P-1309-33 Date:2013-11-08 Entrusting Party （Party A）: 委托方（甲方）： Address: 地址： Tel: Fax: Entrusted Party （Party B）: 受托方（乙方）： Address: 地址: Tel: Fax: Party A entrust Party B to research and develop Technique Proposal Of Smart T/R Verification System. Party B will develop key circuits verification for the Solution and will be in charge of general thought plan.The following articles are reached and abided by the both parties. 甲方委托乙方设计智能收发验证系统技术方案，乙方将设计开发方案的验证电路及负责整体思路的建立，为此订立以下协议，并由双方共同恪守。 Article 1 Definitions 第一条定义
1.1 "Technique Proposal Of Smart T/R Verification System (hereinafter referred to as “the Solution ”)" shall mean all the required techniques to construct the general idea which will commit the attached technical requirements. The Solution shall include all technical details of all designing schemes and experimental verification for key circuits. 智能收发验证系统技术方案(以下简称“方案” )，是指设计满足附件要求的总体技术方案，所需要的解决方案。该解决方案包括全部设计方案资料及关键电路验证技术资料。 1.2"Technical documentations" shall mean all the necessary documents to design the Solution and all the verification documents that Party B will use in designing the Solution. 技术资料，指研发解决方案所必需的资料，包含乙方在设计方案的过程中，所使用的全部有关验证技术资料。 1.3 “R&D ”shall mean research and development. “R&D ”，是指研究和开发。 1.4 ”T/R ”shall mean transmit and receive. T/R ”，是指发射和接收。 1.5 ” Soc ” shall mean system on chip. “SOC ” ,是指系统级芯片。