机械词汇表（1）渐开线圆柱齿轮图样上应注明的尺寸数据Involute cylindrical gears--Information of the dimensional data to be given on the drawing机械振动平衡术语Mechanical vibration--Balancing vocabulary滚动轴承滚轮滚针轴承外形尺寸Rolling bearings Needle roller bearings--Track rollers--Boundary dimensions滚动轴承滚轮滚针轴承公差Rolling bearings--Needle roller bearings-Track rollers--Tolerances齿轮渐开线样板The involute master of gear齿轮螺旋线样板The helix master of gear机械密封的型式、主要尺寸、材料和识别标志Type, main dimension, material and marking of mechanical seals挠性转子机械平衡的方法和准则Mechanical vibration--Methods and criteria for the mechanical balancing of flexible rotors自攻锁紧螺钉的螺杆粗牙普通螺纹系列Screw thread shanks for thread forming screw--Metric coarse thread series十字槽盘头自攻锁紧螺钉Cross recessed pan head thread forming screws十字槽沉头自攻锁紧螺钉Cross recessed countersunk head thread forming screws十字槽半沉头自攻锁紧螺钉Cross recessed raised countersunk head thread forming screws 六角头自攻锁紧螺钉Hexagon head thread forming screws内六角花形圆柱头自攻锁紧螺钉Hexagon lobular socket thread forming screws机床润滑系统Machine tools--Lubrication systems铁氧体永磁直流电动机DC ferrite permanent magnet motors滚动轴承词汇Rolling bearings--V ocabulary带传动基本术语Drives using belt--Basic terminologyV 带传动术语Drives using V-belts and grooved pulleys--Terminology同步带传动术语Synchronous belt drives--Terminology凸缘外圈向心球轴承凸缘尺寸Radial ball bearings with flanged outer ring--Flange dimensions滚动轴承凸缘外圈微型向心球轴承外形尺寸Rolling bearings--Miniature radial ball bearings with flanged outer ring Boundary dimensions现场平衡设备的说明和评价Field balancing equipment--Description and evaluation重型弹簧垫圈Single coil spring lock washers, Heavy type鞍形弹簧垫圈Curved single coil spring lock washers波形弹簧垫圈Wave single coil spring lock washers可靠性、维修性与有效性预计报告编写指南Presentation of reliability, maintainability and availability predictions55°密封管螺纹第1部分: 圆柱内螺纹与圆锥外螺纹Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 1: Parallel internal and taper external threads55°密封管螺纹第2部分: 圆锥内螺纹与圆锥外螺纹Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 2: Taper internal and external threads55°非密封管螺纹Pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads滑动轴承薄壁翻边轴瓦尺寸、公差及检验方法Plain bearings--Thin-walled flanged half bearings--Dimensions, tolerances and methods of checking球笼式同步万向联轴器型式、基本参数和主要尺寸Synchronizing universal coupling with ball and sacket--Type, foundational parameters and main dimensions球笼式同步万向联轴器试验方法Synchroizing universal coupling with ball and sacket 纤维增强塑料层板螺栓连接挤压强度试验方法FRP Laminates-test method for bearing strength by bolted joints滚动轴承外球面球轴承座外形尺寸Roliing bearings--Housings for insert bearing boundary dimensions滚动轴承带座外球面球轴承外形尺寸Rolling bearings--Insert bearing units boundary dimensions滚动轴承参数符号Rolling bearings--Symbols for quantities滚动轴承附件轴承座外形尺寸Rolling bearings accessories--Plummer block housings--Boundary dimensions塑料轴承极限PV试验方法Test method for PV limit of plastics bearings圆头椭圆颈螺栓Bolts,round head with oval neck输送链、附件和链轮Conveyor chains, attachments and chain wheels齿轮材料及热处理质量检验的一般规定General specification for quality inspection of gear materials and their heat treatment透平齿轮传动装置技术条件Spcification for turbine gearings验收试验中齿轮装置机械振动的测定Determination of mechanical vibrations of gear units during acceptance testing滚动轴承包装Rolling bearings-packaging and packing十字槽盘头螺钉和平垫圈组合件Cross recessed pan head screw and plain washer assemblies十字槽盘头螺钉和外锯齿锁紧垫圈组合件Cross recessed pan head screw and serrated lock washer external teeth assemblies十字槽盘头螺钉和弹簧垫圈组合件Cross recessed pan head screw and single coil spring lock washer assemblies十字槽盘头螺钉, 弹簧垫圈和平垫圈组合件Cross recessed pan head screw,single coil spring lock washer and plain washer assemblies十字槽小盘头螺钉和平垫圈组合件Cross recessed small pan head screw and small plain washer assemblies十字槽小盘头螺钉和大垫圈组合件Cross recessed small pan head serew and big plain washer assemblies十字槽小盘头螺钉和弹簧垫圈组合件Cross recessed small pan head screw and single coil spring lock washer assemblies十字槽小盘头螺钉和弹簧垫圈及平垫圈组合件Cross recessed small pan head screw,single coil spring lock washer and plain washer assemblies十字槽沉头螺钉和锥形锁紧垫圈组合件Cross recessed countersunk head screw and countersunk serrated external toothed lock washer assemblies十字槽半沉头螺钉和锥形锁紧垫圈组合件Cross recessed raised countersunk head screwand countersunk external toothed lock washer assemblies十字槽凹穴六角头螺栓和平垫圈组合件Cross recessed hexagon bolt with indentation and plain washer assemblies十字槽凹穴六角头螺栓和弹簧垫圈组合件Cross recessed hexagon bolt with indentation and single coil spring lock washer assemblies十字槽凹穴六角头螺栓, 弹簧垫圈和平垫圈组合件Cross recessed hexagon bolt with indentation, single coil lock washer and plain washer assemblies六角头螺栓和平垫圈组合件Hexagon head bolt and plain washer assemblies六角头螺栓和弹簧垫圈组合件Hexagon head bolt and single coil spring lock washer assemblies六角头螺栓和外锯齿锁紧垫圈组合件Hexagon head bolt and serrated lock washer external teeth assemblies六角头螺栓, 弹簧垫圈和平垫圈组合件Hexagon head bolt, single coil spring lock washer and plain washer assemblies十字槽盘头自攻螺钉和平垫圈组合件Cross recessed pan head tapping screw and plain washer assemblies十字槽盘头自攻螺钉和大垫圈组合件Cross recessed pan head tapping screw and large plain washer assemblies十字槽凹穴六角头自攻螺钉和平垫圈组合件Cross recessed hexagon head tapping sorew with indentation and plain washer assemblies十字槽凹穴六角头自攻螺钉和大垫圈组合件Cross recessed hexagon head tapping screw with indentation and large plain washer assemblies六角头自攻螺钉和平垫圈组合件Hexagon head tapping screw and plain washer assemblies六角头自攻螺钉和大垫圈组合件Hexagon head tapping screw and big washer assemblies 组合件用平垫圈Plain washer for assembly组合件用大垫圈Big plain washer for assembly组合件用弹簧垫圈Single coil spring lock washer for assembly组合件用外锯齿锁紧垫圈Serrated lock washer external teeth for assembly组合件用锥形锁紧垫圈Countersunk external toothed lock washer for assembly自攻螺钉组合件用平垫圈Samll wasner for tapping screw assembly自攻螺钉组合件用大垫圈Big washer for tapping screw assembly商品紧固件的中等精度普通螺纹极限尺寸General purpose screw threads - Limits of sizes for commercial bolt and nut threads？Medium quality商品紧固件的粗糙级精度普通螺纹极限尺寸General purpose screw threads - Limits of sizes for commercial bolt and nut threads？Coarse quality磁粉离合器通用技术条件General specification for magnetic particle clutch关节轴承杆端关节轴承Spherical plain bearings--Spherical plain bearings rod ends关节轴承推力关节轴承Spherical plain bearings--Thrust spherical plain bearings关节轴承向心关节轴承Spherical plain bearings--Radial spherical plain bearings关节轴承角接触关节轴承Spherical plain bearings--Angular contact radial spherical plain bearings刚性转子平衡品质许用不平衡的确定Balance quality of rigid rotors--Determination of permissible residual unbalance十字槽凹穴六角自攻螺钉Cross recessed hexagon head tapping screws with indentation1 型六角开槽螺母细牙A和B级Hexagon slotted and castle nuts, style l--Fine pitch thread--Product grades A and B2 型六角开槽螺母细牙A和B级Hexagon slotted and castle nuts, style 2--Fine pitch thread--Product grades A and B六角开槽薄螺母细牙A和B级Hexagon thin slotted nuts--Fine pitch thread--Product grades A and B链条、链轮术语Terminology of chains and chainwheels旋转轴唇形密封圈结构尺寸系列第一部分: 内包骨架旋转轴唇形密封圈Rotary shaft lip seals--Design criteria for standard applications--Part 1: rubber covered rotary shaft lip seals 旋转轴唇形密封圈结构尺寸系列第二部分: 外露骨架旋转轴唇形密封圈Rotary shaft lip seals--Design criteria for standard applications--Part 2: Metal cased rotary shaft lip seals 旋转轴唇形密封圈结构尺寸系列第三部分: 装配式旋转轴唇形密封圈Rotary shaft lip seals--Design criteria for standard applications--Part 3: assembled rotary shaft lip seals 锥齿轮承载能力计算方法Methods for the calculation of load capacity for bevel gears通用机械渐开线圆柱齿轮承载能力简化计算方法Simplified methods for the calculation of load capacity of involute cylindrical gears for general machines矩形内花键长度系列Straight-sided internal spline--Length series圆柱蜗杆传动基本参数Basic parameters of cylindrical worm gears圆柱蜗杆、蜗轮术语及代号Terminology and symbols for cylindrical worm and worm wheel圆柱蜗杆基本齿廓Basic tooth profile of cylindrical worm圆柱蜗杆模数和直径Module and diameter of cylindrical worm圆柱蜗杆、蜗轮精度Accuracy of cylindrical worm and wormwheel圆柱齿轮减速器基本参数Basic parameters for cylindrical gear units渐开线圆柱齿轮--精度第1部分: 轮齿同侧齿面偏差的定义和允许值Cylindrical gears--system of accuracy--Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth渐开线圆柱齿轮--精度第2部分: 径向综合偏差与径向跳动的定义和允许值Cylindrical gears-system of accuracy--Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information齿条精度Accuracy of rack摆线针轮行星传动基本术语Basic terminology of cycloidal drives摆线针轮行星传动图示方法Representation of drawings for cycloidal drives摆线针轮行星传动几何要素代号Symbols of geometrical data for cycloidal drives小模数锥齿轮基本齿廓Basic rack tooth profile of fine-pitch bevel gears小模数锥齿轮精度Accuracy of fine-pitch bevel gears小模数圆柱蜗杆基本齿廓Basic rack tooth profile of fine-pitch cylindrical worm小模数圆柱蜗杆、蜗轮精度Accuracy of fine-pitch cylindrical worm and wormwheel普通Ｖ带轮Grooved pulleys for classical V-belt窄Ｖ带轮Grooved pulleys for narrow V-belt汽车同步带传动带轮Synchronous belt drives for automotive applications - Pulleys农业机械用双面Ｖ带轮Agricultural machinery double V-belt pulleys农业机械用半宽Ｖ带轮Agricultural machinery half wide V-belt pulleys单级向心涡轮液力变矩器型式和基本参数Single-stage centripetal turbine hydrodynamic torque converters - Types and basic parameters紧固件横向振动试验方法Transverse vibration testing method for fasteners无头焊钉Headless studs for stud welding圆柱头焊钉Cheese head studs for stud welding机械密封产品型号编制方法Method of establishment for type of mechanical seals滑动轴承整体轴套的轴径Plain bearings - Shaft diameters for unsplit bushes滑动轴承整圆止推垫圈尺寸和公差Plain bearings - Ring type thrust washers made from strip - Dimensions and tolerances滑动轴承半圆止推垫圈要素和公差Plain bearings - Pressed bimetallic half thrust washers - Features and tolerances芯型弹性联轴器Resilient coupling with core element抗静电环形V带导电性规定值和试验方法Antistatic endless V-belts - Electrical conductivity - Characteristic and method of test汽车同步带物理性能试验方法Synchronous belt drives--Automotive belt--Determination of physical properties农业机械用V带尺寸V-belts for agricultural machinery-Dimensions机器理论与机构学术语Terminology for the theory of machines and mechanisms传动用齿形链及链轮Inverted tooth chains and chainwheels双涡轮液力变矩器通用技术条件General specifications of double--Turbine torque converter1/4 圆锥量规Gaugers of 1/4 tapers聚酰胺片基平带Polyamide plate based flat beltV 带传动额定功率的计算V-belt drives - Calculation of power ratings带传动普通及窄V带传动用带轮(基准宽度制) 槽形检验Belt drives--Pulleys for classical and narrow V-belts drives(system based on datum width)--Geometrical inspection of grooves带传动普通及窄V带传动用带轮(有效宽度制) 槽形检验Belt drives--Pulleys for classical and narrow V-belts drives(system based effective width)--Geometrical inspection of grooves带轮的材质、表面粗糙度及平衡Quality , Surfaceroughness and balance of transmission pulleys带传动平带和带轮尺寸和公差Belt drives--Flat transmission belts and corresponding pulleys--Dimensions and tolerances同步带传动带轮Synchronous belt drives - Pulleys同步带传动额定功率和传动中心距的计算Synchronous belt drives - Calculation of power rating and drive centre distance锥齿轮和准双曲面齿轮精度Accuracy of bevel and hypoid gears行星传动基本术语Basic terminology of planetary drives锥齿轮胶合承载能力计算方法Methods for the calculation of scuffing load capacity for bevel gears防锈术语Rust prevention terminology普通V带和窄V带尺寸Classical and narrow V-belts--Dimensions汽车V带疲劳试验方法V-belt drives for the automotive industry--Fatigue test同步带尺寸Synchronous belts - Dimensions圆锥量规公差与技术条件Tolerances and specification of taper gauges莫氏与公制圆锥量规Gauges of Morse tapers and metric tapers7:24工具圆锥量规Gauges of 7:24 tapers钻夹圆锥量规Gauges of drill chuck tapers梯形螺纹极限尺寸Limits of sizes for metric trapezoidal screw threads锥齿轮模数Modules of bevel gears直齿及斜齿锥齿轮基本齿廓Basic tooth profile of straight and skew bevel gears锥齿轮和准双曲面齿轮术语Terminology for bevel and hypoid gears锥齿轮图样上应注明的尺寸数据Bevel gears？Information of the dimensional data to be given on the drawing机械式联轴器分类Mechanical coupling - Classification小模数圆柱齿轮减速器通用技术条件General specification for speed reducer with small module cylindrical gears高扭矩十字槽Offset cruciform recess for rotary fastening devices谐波齿轮传动基本术语Basic terminology of harmonic gear drive滑动轴承卷制轴套Plain bearings - Wrapped bushes封闭型扁圆头抽芯铆钉Mushroom head break mandrel closed end blind rivets封闭型沉头抽芯铆钉120 deg flush head break mandrel closed end blind rivets开口型沉头抽芯铆钉120 deg flush head break mandrel blind rivets开口型扁圆头抽芯铆钉Mushroom head break mandrel blind rivets抽芯铆钉技术条件Specifications for break mandrel blind rivets60°圆锥管螺纹Taper pipe threads with 60 degree矿用高强度圆环链High-tensile steel chains(round link) for mining窄Ｖ带Narrow V-belt难燃Ｖ带Fire resistant V-belt工业用变速宽V带尺寸Size-Speed-chaingers wide V-belts for industry汽车同步带尺寸Automotive synchronous belt - Dimensions农业机械用Ｖ带疲劳试验方法Fatigue test method for agricultural V-belts双圆弧圆柱齿轮基本齿廓Double-circular-arc tooth profile of basic rack for cylindrical gears圆柱蜗杆、蜗轮图样上应注明的尺寸数据Cylindrical worm and wormwheel information of the dimensional data to be given on the drawing滚动轴承冲压外圈滚针轴承外形尺寸方案Rolling bearings - Needle roller bearings, drawn cup, without inner ring - Boundary dimension plan关节轴承安装尺寸Spherical plain bearings, joint type - Abutment and fillet dimensions 滑动轴承双金属结合强度破坏性试验方法Plain bearings - Metallic multilay er plain bearings - Destructive testing of bond for bearing metals滑动轴承覆有减摩塑料层的双金属轴套Plain bearings - Bimetallic bushes with plastic overlay平衡机防护罩和其他安全措施Batancing machines - Enclosures and other safety measu res石油和液体石油产品立式圆筒形金属油罐容积标定法(光电内测距法) Petroleum and liquid petroleum products--Volumetric calibration of vertical cylindrical metaltanks--Electro-optical distance-ranging internal method标牌Plates机械振动台技术条件Specification for mechanical vibration generator system电动振动台技术条件Specification for electrodynamic vibration generator system轧机油膜轴承通用技术条件General technical requirement of oil film bearing for rolling mill汽车V带尺寸Automotive V-belts--Dimensions一般传动用同步带Synchronous belts for general driveV 带均匀性规范和试验方法中心距变化量法V-belts - Uniformity of belts - Centre distance variation - Specification and test method带传动--普通Ｖ带传动Belt drives - Classical V-belt drives带传动--窄Ｖ带传动Belt drives - Narrow V-belt drives锯齿形(3°、30°)螺纹牙型Butterss threads with 3 and 30 degrees flank angle - Profiles 锯齿形(3°、30°)螺纹直径与螺距系列Buttress threads with 3 and 30 degrees flank angle - General plan锯齿形(3°、30°)螺纹基本尺寸Buttress threads with 3 and 30 degrees flank angle - Basic dimensions锯齿形(3°、30°)螺纹公差Buttress threads with 3 and 30 degrees flank angle - Tolerances 合理润滑技术通则General principle for rational lubrication technology齿轮胶合承载能力试验方法Standard test method for scuffing load capacity of gears焊接方螺母Square weld nuts焊接六角螺母Hexagon weld nuts螺纹紧固件轴向载荷疲劳试验方法Axial load fatigue testing for threaded fasteners销剪切试验方法Pins and grooved pins - Shear test双圆弧圆柱齿轮承载能力计算方法Methods of the calculation for load capacity of cylindrical gear with double-circular-arc tooth profile精密机械用紧固件十字槽螺钉Fasteners for fine mechanics--Cross recessed screws精密机械用紧固件十字槽自攻螺钉刮削端Fasteners for fine mechanics--Cross recessed tapping screws--Scrape point腰状杆螺柱连接副型式分类Connections with waisted stud--Tape classification腰状杆螺柱连接副螺柱Connections with waisted stud--Studs腰状杆螺柱连接副螺母、受力套管Connections with waisted stud--Nuts, extension sleeves多股圆柱螺旋弹簧Stranded wire cylindrical helical springs槽销平行沟槽Grooved pins--Parallel grooved槽销锥槽Grooved pins--Taper grooved槽销圆头、沉头Grooved pins--With round head or countersunk head旋转轴唇形密封圈基本尺寸和公差Rotary shaft lip type seals--Nominal dimensions and tolerances渐开线圆柱齿轮精度检验规范Inspection code for accuracy of involute cylindrical gears 谐波传动减速器Harmonic drive reducers缠绕式垫片试验方法Test methods for spiral wound gaskets纺织玻璃纤维无捻粗纱棒状复合材料压缩强度的测定Textile glass--Rovings--Determination of compressive strength of rod composites墙板自攻螺钉Dry wall screws机械密封试验方法Code for test of machanical seal齿轮接触疲劳强度试验方法Standard of test method for surface load capacity of gears齿轮弯曲疲劳强度试验方法Standard of test methed for bending load capacity of gears 齿轮装置效率测定方法Determination of efficiency for gear units旋转轴唇形密封圈性能试验方法Rotary shaft lip type seals--Performance test proceduces 复合阻尼隔振器和复合阻尼器Compound damping isolator and compound damperV带疲劳试验方法有扭矩法V-belts--Fatigue test--Loaded method螺纹术语The terms of screw threads滑动轴承厚壁多层轴承衬背技术要求Plain bearings--Requirements on backings for thick-walled multilayer bearings小螺纹牙型Miniature screw threads--Profiles小螺纹直径与螺距系列Miniature scrcw threads--Generat plan小螺纹基本尺寸Miniature screw threads--Basic dimensions小螺纹公差Miniature screw threads--Tolerances小螺纹极限尺寸Miniature screw threads--Limits of sizes液粘调速离合器Hydroviscous variable speed clutch湿式离合器摩擦元件试验方法Test method for friction element of wet clutch可靠性增长大纲Programmes for reliability growth往复运动橡胶密封圈外观质量Appearance quality for reciprocating rubber seals旋转轴唇形密封圈外观质量Appearance quality for rotary shaft lip seals工业用变速宽V带及其尺寸Variable speed-changers wide V-belts and size for industry 普通V带疲劳试验方法(无扭矩法) Classical V-belts--Fatigue test(non-loading method) 螺杆Threaded rods工程用钢制焊接弯板链和链轮Welded steel type cranked link mill chains and chain wheels带传动带轮中心距调整极限值Belt drives--Pulleys--Limiting values for adjustment of centres圆弧圆柱齿轮基本术语Terminology of circular-arc gear圆弧圆柱齿轮精度Accuracy of cylindrical gear with circular-arc tooth profile圆锥过盈配合的计算和选用The calculation and selection of cone interference fits普通螺纹极限尺寸Limits of size for general purpose screw threads花键基本术语Basic terminology of splineV带和多楔带传动节线位置的动态测定V-and ribbed belt--Dynamic test to determine Pitch zone location扁圆头击芯铆钉Flat round head drive rivets沉头击芯铆钉Countersunk head drive rivets击芯铆钉技术条件Specifications for drive rivets十字槽盘头自钻自攻螺钉Cross recessed pan head self-drilling tapping screws十字槽沉头自钻自攻螺钉Cross recessed countersunk head self-drilling tapping screws 十字槽半沉头自钻自攻螺钉Cross recessed raised countersunk head self-drilling tapping screws六角法兰面自钻自攻螺钉Hexagon flange head self-drilling tapping screws平面二次包络环面蜗杆传动术语Planar double-enveloping worm gearing terminology平面二次包络环面蜗杆传动几何要素代号Planar double--enveloping worm gearing geometrical data symbols平面二次包络环面蜗杆减速器系列、润滑和承载能力Planar double-enveloping worm gearsreducer-dimensions and load capacitys平面二次包络环面蜗杆传动精度Planar double-enveloping worm gearing accuracy平面二次包络环面蜗杆减速器技术条件Planar double-enveloping worm gearing reducer technical specification工业用多楔带及带轮尺寸(PH、PJ、PK、PL和PM型) V-ribbed belts and pulleys for industrial applications--Dimensions (PH PJ PK PL and PM profiles)滚动轴承滚针和推力圆柱滚子组合轴承外形尺寸Rolling bearings--Combined needle roller thrust roller bearings--Boundary dimensions六角法兰面螺栓小系列Hexagon flange bolts--Small series滑动轴承金属轴承材料的压缩试验Plain bearings--Compression testing of metallic bearing materials螺纹紧固件应力截面积和承载面积Stress area and bearing area for threaded fasteners螺纹紧固件紧固通则General rules of tightening for threaded fasteners螺纹紧固件拧紧试验方法Method of tightening test for threaded fasteners六角凸缘自攻螺钉Hexagon head tapping screws with collar六角法兰面自攻螺钉Hexagon flange head tapping screws直廓环面蜗杆、蜗轮精度Accuracy of double enveloping worm gearing with straight line generatrix机械振动轴与配合件平衡的键准则Mechanical vibration--Balancing--Shaft and fitment key convention薄型楔键及其键槽Thin taper reys and their corresponding keyways紧固件螺栓、螺钉、螺柱和螺母通用技术条件Fasteners--General requirements for blots,screws,studs and nuts钢网架螺栓球节点用高强度螺栓High strength bolts for joints of space grid structures 直线运动支承直线运动球轴承外形尺寸和公差Linear motion bearings--Linear motion ball bearings--Boundary dimensions and tolerances螺旋弹簧疲劳试验规范Helical springs fatigue testing standard管道支吊架第1部分; 技术规范Pipe supports and hangers--Part 1: Technical specification管道支吊架第2部分: 管道连接部件Pipe supports and hangers--Part 2: Pipe attachments 管道支吊架第3部分: 中间连接件和建筑结构连接件Pipe supports and hangers--Part 3: Middle connection attachments and building structure attachments带传动联组普通V带轮(有效宽度制) Belt drives--Grooved pulleys for joined classical V-belts (effective system)花键承载能力计算方法Calculation of load capacity of spline齿轮磨削后表面回火的浸蚀检验Gears--Surface temper etch inspection after grinding 平头铆螺母Flat head riveted nuts沉头铆螺母Countersunk head riveted nuts小沉头铆螺母Small countersunk head riveted nuts120°小沉头铆螺母120°Small countersunk head riveted nuts平头六角铆螺母Flat head hexagon riveted nuts铆螺母技术条件Specifications for riveted nuts滚子链传动选择指导Guidance on the selection of roller chain drives铆钉杆径Rivet shank diameters精密机械用六角螺母Hexagon nuts for fine mechanics--Product grade F栓接结构用大六角头螺栓螺纹长度按GB/T 3106 C级8.8和10.9级Hexagon bolts for high-strength structural bolting with large width across flats(thread lengths according to GB/T 3106)--Product grade C-Property classes 8.8 and 10.9栓接结构用大六角头螺栓短螺纹长度C级8.8和10.9级Hexagon bolts for high-strength structural bolting with large width across flats(short thread length)--Product grade C-Property classes 8.8 and 10.9栓接结构用大六角螺母B级8和10级Hexagon nuts for high-strength structural bolting with large width across flats--Product grade B-Property classes 8 and 10栓接结构用1型大六角螺母B级10级Hexagon nuts for structural bolting with large width across flats,style 1--Product grade B-Property class 10栓接结构用平垫圈淬火并回火Plain washers for high-strength structural bolting hardened and tempered栓接结构用1型六角螺母热浸镀锌(加大攻丝尺寸) A和B级5、6和8级Hexagon nuts for structural bolting style 1 hot-dip galvanized (oversize tapped)--Product grades A and B-Property classes 5,6 and 8栓接结构用2型六角螺母热浸镀锌(加大攻丝尺寸)A级9级Hexagon nuts for structural bolting-style 2,hot-dip galvanized(oversize tapped)--Product grade A--Property class 9 滑动轴承烧结轴套的尺寸和公差Plain bearings--Sintered bushes--Dimensions and tolerances滑动轴承铜合金轴套Plain bearings--Copper alloy bushes滑动轴承流体动压润滑条件下试验机内和实际应用的滑动轴承疲劳强度Plain bearings--Bearing fatigue--Plain bearings in test rigs and in application under conditions of hydrodynamic lubrication滑动轴承薄壁滑动轴承用金属多层材料Plain bearings--Multilayer materials for thin-walled plain bearings滑动轴承基本符号Plain bearings--Basic symbols滑动轴承应用符号Plain bearings--Applications滑动轴承多层金属滑动轴承结合强度的超声波无损检验Plain bearings--Non-destructive ultrasonic testing of hond for metallic multilayer plain bearings 滑动轴承薄壁轴瓦和薄壁轴套的壁厚测量Plain bearings--Measurement of wall thickness of thin-walled half-bearings and thin-walled bushes滑动轴承卷制轴套外径的检测Plain bearings--Checking the outside diameter for wrapped bushes钢制压力容器Steel pressure vessels管壳式换热器Tubular heat exchangers管道元件的公称通径Nominal size for pipe components管道元件公称压力Nominal pressure for pipe components压缩空气用橡胶软管(2.5 Mpa 以下) Rubber hose for compressed air (up to 2.5 Mpa)工业通风机用标准化风道进行性能试验Industrial fans--Performance testing using standardized airways船用外螺纹锻钢截止止回阀Marine forged steel male thread stop and check valves铜及铜合金拉制管Drawn tube of copper and copper alloys铜及铜合金毛细管Capillary tube of copper and copper alloys工业蒸汽锅炉参数系列Specifications for industrial steam boiler液压气动系统及元件公称压力系列Fluid power systems and components--Nominal pressures液压泵及马达公称排量系列Hydraulic fluid power--Pumps and motors -- Geometric displacements液压气动系统及元件缸内径及活塞杆外径Fluid power systems and components--Cylinder bores and piston rod diameters液压气动系统及元件缸活塞行程系列Fluid power systems and components--Cylinders--Basic series of piston strokes液压气动系统及元件活塞杆螺纹型式和尺寸系列Fluid power systems and components--Cylinders--Piston rod thread dimensions and types液压气动系统用硬管外径和软管内径Fluid power systems and components--Connectors and associated components--Outside diameters of tubes and inside diameters of hoses 液压传动隔离式蓄能器压力和容积范围、特征量及标识Hydraulic fluid power--Gas-loaded accumulators with separators--Range of pressures and volumes,characteristic quantities and identification液压泵和马达安装法兰和轴伸的尺寸系列及标记第一部分: 二孔和四孔法兰和轴伸Hydraulic fluid power--Positive displacement pumps and motors--Dimensions and identification code for mounting flanges and shaft ends--Part 1: Two-and four-hole flanges and shaft ends 液压泵和马达安装法兰与轴伸的尺寸系列和标记(二) 多边形法兰(包括圆形法兰) Hydraulic fluid power--Positive displacement pumps and motors--Dimensions and identification code for mounting flanges and shaft ends--Part 2: Polygonal flanges(including circular flanges) 四油口板式液压方向控制阀安装面Hydraulic fluid power--Four-port directional control valves--Mounting surfaces焊接及切割用橡胶软管氧气橡胶软管Specification for hose for equipment for gas welding, cutting and related processes - Oxygen rubber hose焊接及切割用橡胶软管乙炔橡胶软管Specification for hose for equipment for gas welding, cutting and related processes - Acetylene rubber hose一般用途管法兰连接尺寸Pipe flange connectors for ordinary use--Mounting dimensions 一般用途管法兰密封面形状和尺寸Pipe flanges for ordinary use--Sealing surfaces--Forms and dimensions小型交流风通用机技术条件A.C. miniature blowers, general specification for井用潜水泵技术条件Specification for submersible pumps for deep well二通插装式液压阀安装连接尺寸Hydraulic fluid power--Two-port slip-in cartridge valves cavities--Mounting dimensions液压元件螺纹连接油口型式和尺寸Fluid power systems and components--Ports--Dimensions and design液压缸活塞和活塞杆动密封沟槽型式、尺寸和公差Hydraulic fluid power--Cylinder rod and piston seals for reciprocating applications--Dimensions and tolerances of housings 液压缸活塞和活塞杆窄断面动密封沟槽尺寸系列和公差Hydraulic fluid power--Cylinder rod and piston seals for reciprocating applications--Dimensions and tolerances ofhousings--Narrow section series镍及镍铜合金管Nickel and nickel-copper alloy tube石棉水泥输水管及其接头Asbestos-cement pressure pipes and joints for water石棉水泥输煤气管Asbestos-cement pressure pipe for gas transmission石棉水泥井管Asbestos-cement pipe for well casing不锈耐酸钢极薄壁无缝钢管Thinnest-wall seamless tubes of stainless and acid-resistance steel低压流体输送用焊接钢管Welded steel pipe for low pressure liquid delively真空技术术语Terminology for vacuum technology真空技术系统图用图形符号Vacuum technology--Graphical symbols水泵流量的测定方法Methods for measurement of capacity of pump炼厂、化工及石油化工流程用离心泵通用技术条件Centrifugal pumps for refinery, chemical and petrochemical processes--General technical specifications离心泵、混流泵、轴流泵和旋涡泵试验方法Test methods for centrifugal, mixed flow, axial and regenerative pumps通风机基本型式、尺寸参数及性能曲线Basic types sizes parameters and characteristics of fans可锻铸铁管路连接件Malleable cast iron pipe fittings灰口铸铁管件Gray iron castigs for pipe fittings砂型离心铸铁管Cast-iron pressure pipe centrifugally cast in sand-lined molds连续铸铁管Cast-iron pressure pipe made by continuous casting process液压气动用O形橡胶密封圈尺寸系列及公差Fluid systems--Sealing devices--O-rings--Inside diameters, cross-sections, tolerances and size identification code O 形橡胶密封圈外观质量检验标准Appearance quality acceptance criteria for rubber O-rings液压气动用O形橡胶密封圈沟漕尺寸和设计计算Fluid power systems--O-ring--Design criteria for O-ring housing--Basic calculation硬质合金顶锤与压缸Anvils and high pressure cylinders made from cemented carbideP3型镀锌金属软管Type p3 galvanized metallic flexible hoseS型钎焊不锈钢金属软管Type S brazed stainless steel flexible metallic hose钢丝增强液压橡胶软管和软管组合件Rubber hoses and hose assemblies--Wire reinforced hydraulic type液压系统通用技术条件Hydraulic fluid power--General rules relating to systems容积式压缩机验收试验Displacement compressor-Acceptance tests液力传动术语Hydrodynamic drive terminology气动调节阀Pneumatic industrial process control valves流体输送用热塑性塑料管材公称外径和公称压力Thermoplastics pipes for the conveyance of fluids--Nominal outside diameters and nominal pressures化工用硬聚氯乙烯(PVC-U)管材Unplasticized polyvinyl chloride (PVC-U) pipes for chemical industry铝及铝合金管材外形尺寸及允许偏差Wrought aluminium and aluminium alloy tubes--Dimensions and deviations铝及铝合金热挤压管第一部分: 无缝圆管Aluminium and aluminium alloy extruded tubes--Part 1: Seamless tubes缠绕式垫片水压密封性能试验方法Spiral wound gaskets test method of hydraulic pressure sealing characteristics缠绕式垫片蒸汽密封性能试验方法Spiral wound gaskets test method of steam sealing characteristics缠绕式垫片分类Specification and symbol of spiral wound gaskets缠绕式垫片管法兰尺寸系列Dimensional series of spiral wound gaskets for pipe flanges 缠绕式垫片技术条件Specification of spiral wound gaskets压缩机、凿岩机械与气动工具优先压力Compressors, rock drilling machines and pneumatic tools - Preferred pressures容积式压缩机术语总则Displacement compressors vocabulary--General压缩机分类Compressors--Classification容积式压缩机噪声声功率级的测定--工程法Determination of sound power level for noise emitted by displacement compressors--Engineering method夹紧型真空快卸法兰Vacuum technology clamped type quick release flange拧紧型真空快卸法兰Vacuum technology screwed type quick release flange钢质无缝气瓶Seamless steel gas cylinders钢质焊接气瓶Welded steel gas cylinders高压锅炉用无缝钢管Seamless steel tubes and pipes for high pressure boiler橡胶、塑料软管及软管组合件液压试验方法Rubber and plastics hoses and hose assemblies--Hydrostatic testing橡胶、塑料软管低温曲挠试验Rubber and plastics hoses--Subambient temperature flexibility tests橡胶或塑料软管及纯胶管弯曲试验Rubber or plastics hoses and tubing--Bending tests 胶管耐压扁试验方法Rubber hose--Test method for crush resistance橡胶、塑料软管及软管组合件真空性能的测定Rubber and plastics hoses and hose assemblies--Determination of suction resistance橡胶、塑料软管及软管组合件无屈挠液压脉冲试验Rubber or plastics hoses and hose assemblies--Hydraulic impulse test without flexing扩口式端直通管接头Flared type tube fittings--Straight thread connector--Assembly扩口式端直通管接头体Flared type tube fittings--Straight thread connector--Body扩口式锥螺纹直通管接头Flared type tube fittings--Male connector--Assembly扩口式锥螺纹直通管接头体Flared type tube fittings--Male connector--Body扩口式锥螺纹长管接头Flared typed tube fittings--Straight taread long connector--Assembly扩口式锥螺纹长管接头体Flared type tube fittings--Straight thread long connector--Body 扩口式直通管接头Flared type tube fittings--Union--Assembly扩口式直通管接头体Flared type tube fittings--Union--Body扩口式锥螺纹直角管接头Flared type tube fittings--Male elbow--Assembly扩口式锥螺纹直角管接头体Flared type tube fittings--Male elbow--Body扩口式直角管接头Flared type tube fittings--Union elbow--Assembly扩口式直角管接头体Flared type tube fittings--Union elbow--Body扩口式可调向端直角管接头Flared type tube fittings--Straight thread elbow-- Assembly 扩口式可调向端直角管接头体Flared type tube fittings--Straight thread elbow--Body扩口式组合直角管接头Flared type tube fittings--Swivel elbow--Assembly。