英文技术服务合同范本
Contract No.:________________________.
Date of Signature:____________________.
Place of Signature:____________________.
This Contract is made and entered into through friendly negotiation by and between China____________________ (hereinafter referred to as “Client”), as one party, and____________________ (hereinafter referred to as“Consultant”),as the other party, concerning the technical consultancy service of__________, under the following terms and conditions:
Article 1 Contents of Technical Consultancy Service
1.1 Whereas Client desires to obtain the technical consultancy service of from Consultant and Consultant has agreed to perform such services.
1.2 The Scope of Technical Services is defined in Appendix 1.
1.3 The Time Schedule for the Services is shown in Appendix
2.
1.4 The Manning Schedule is described in Appendix 3.
1.5 Consultant shall complete the Services within__________months from the Effective Date of this Contract and furnish the final technical service report, including drawings, designing documents,
all kinds of standards and photos, within____months. Consultant shall keep aware, free of charge, Client of the latest development of similar projects and any progress made in order to improve the designing of the project.
Article 2 Both Parties' Responsibility and Liability
2.1 Client shall furnish to Consultant the pertinent data, technical service reports, maps and information available to him and shall give to Consultant the reasonable assistance necessary for carrying out of his duties. Particularly Client shall nominate a general representative who shall be available at reasonable time.
2.2 Client shall assist Consultant with the responsible authorities for obtaining visas, work permits and other documents required by Consultant to enter the country and to have access to the Site of the Project. The above expenses shall be borne by Consultant.
2.3 Consultant shall furnish a sufficient number of competent personnel to perform its obligation hereunder, in addition to those personnel specifically listed in Appendix
3. All personnel employed by Consultant in carrying out the work shall be exclusively Consultant's responsibility, and Consultant shall hold Client harmless from any claims of any kind by Consultant's personnel
arising out of any acts by Consultant or its personnel in connection with the work performed hereunder.
2.4 Consultant shall provide Client all the technical technical service reports and relevant documentation within the Scope of Technical Services and within the Time Schedule of the Time Schedule for the Services.
2.5 Consultant shall assist Client＇S personnel in his country in obtaining visas and in arranging lodgings. Hotel and boarding expenses shall be borne by Client. Consultant shall supply to
Client＇S personnel office space and necessary facilities as well as transportation.
2.6 Consultant shall be responsible for and shall indemnify
Client and his employee in respect of injury to person or damage to property occurring in connection with the services, to the extent
that such damage or injury directly results from negligence of Consultant's personnel while engaged in activities under this Contract.Consultant shall be liable only to the work under this Contract.
2.7 Any and all liability of Consultant with respect to this Contract shall be limited to the Total Contract Price received by Consultant for his profession services and shall terminate upon expiration of the warranty period set forth in Article 7.
3.
Article 3 Price and Payment
3.1 The total contract price is__________(say
__________________only) in________(currency). The breakdown prices of the above mentioned total contract price are as follows:
Contract Price for Item 1: ______(say ____________only)
in________ (currency); Contract Price for Item 2: ______(say
____________only) in________ (currency); Contract Price for Item 3: ______(say ____________only) in________ (currency); Contract Price
for Item 4: ______(say ____________only) in________ (currency).
3.2 The total contract price will include all the service and technology provided by Consultant. The total contract price shall be firm and fixed and shall not fluctuate with any inflation. The total contract price shall include all charges and expenses incurred by Consultant in performing his obligations both in his own country and in the People's Republic of China and includes the expenses incurred
in sending the Technical Documentation to Client's office by all kinds of forms.
In the event of Force Majeure as defined in the Contract, the total contract price shall be readjusted through friendly negotiations between the parties. If Client requires services not contemplated in the Scope of Services the parties shall friendly discuss an amendment to the
total contract price. Any such amendment shall be in writing countersigned by both parties. This document shall then form integral part of the Contract.
3.3 All payments to be made by Client to Consultant under the present Contract shall be made by telegraphic transfer. In case of any payment by Client, the payment shall be effected
through__________in China to _________ for the account of Consultant.
In consideration for the services provided by Consultant hereunder, Client shall effect the payment to Consultant in accordance with the following manner and percentage:
3.3.1 _______ percent (________ %) of the total contract price,
i.e._____________ (Say: ________ only), shall be paid by Client to Consultant within ________ (____) days after the client has received the following documents provided by Consultant and found them in order.
A. One (1) original and two (2) duplicate copies of Consultant's government approval, or a written statement of the competent authorities or relevant agency of Consultant's country certifying
that such document is not required;
B. One (1) original and one (1) duplicate copy of Irrevocable Letter of Guarantee for advance payment issued by Consultant's Bank
in favor of Client covering_______(Say:________ only), specimen of which is as per Appendix 4;
C. Five (5) copies of profoma invoice covering the total contract price;
D. Five (5) copies of manually signed commercial invoice indicating the amount to be paid;
E. Two (2) copies of sight draft.
The said shall be delivered by Consultant not later than ____days after the effective date of the ________present Contract.
3.3.2 ________percent (____%) of the Contract price for Item 1,
i.e._________ (Say: __________ only) shall be paid by Client to Consultant within _____ (__) days after Consultant has received the following documents provided by Consultant and found them in order.
A. Ten (10) copies of technical service report on Item 1;
B. Five (5) copies of manually signed commercial invoice indicating the amount to be paid;
C. Two (2) copies of sight draft.
3.3.3 ________ percent (____%) of the Contract price for Item 2,
i.e. ___________ (Say: ____________ only) shall be paid by Client to Consultant within ________ (___) days after Licensee has received the following documents provided by Consultant and found themin order.
A. Ten (10) copies of technical service report on Item 1;
indicating the amount to be paid;
C. Two (2) copies of sight draft.
3.3.4 ________percent (____%) of the Contract price for Item 3,
i.e._________ (Say: __________ only) shall be paid by Client to Consultant within _____ (__) days after Consultant has received the following documents provided by Consultant and found them in order.
A. Ten (10) copies of technical service report on Item 1;
B. Five (5) copies of manually signed commercial invoice indicating the amount to be paid;
C. Two (2) copies of sight draft.
3.3.5 ________percent (____%) of the Contract price for Item 4,
i.e._________ (Say: __________ only) shall be paid by Client to Consultant within _____ (__) days after Consultant has received the following documents provided by Consultant and found them in order.
A. Ten (10) copies of technical service report on Item 1;
B. Five (5) copies of manually signed commercial invoice indicating the amount to be paid;
C. Two (2) copies of sight draft.
3.3.6 ________percent (____%) of the Total Contract price ,
i.e._________ (Say: __________ only) shall be paid by Client to Consultant within _____ (__) days after Consultant has received the following documents provided by Consultant and found them in order.
indicating the amount to be paid;
B. Two (2) copies of sight draft.
3.4 In case Consultant is liable for paying to Client the penalty under the Contract, Client shall have the right to deduct it from any said payment.
3.5 The banking charges of both parties incurred in China for the execution of the Contract shall be borne by Client and those incurred outside China shall be borne by Consultant.
Article 4 Delivery Schedule
4.1 The deadline for the arrival of the Technical service reports CIF _____ are:
A. Technical service report on Item 1 : _________months after effectiveness of the Contract;
B. Technical service report on Item 2 : _________months after effectiveness of the Contract;
C. Technical service report on Item 3 : _________months after effectiveness of the Contract;
D. Technical service report on Item 4 : ________months after effectiveness of the Contract.
4.2 Consultant will inform Client by Fax when the Technical service reports are airmailed to Client indicating the date and number of airway bill. Client will inform Consultant when the Technical service reports have been received.
4.3 Should any document be missing or damaged during the
transport Consultant shall be notified accordingly and within two (2) weeks the missing or damaged document shall be replaced by Consultant free of charge.
Article 5 Confidentiality
5.1 All data assembled, developed, compiled, reproduced, studied, and prepared in connection with the work done hereunder and furnished to Consultant by Client shall be considered confidential and shall not be divulged to any person, firm or corporation other than Client or its designated representatives. This Clause shall remain binding on Consultant notwithstanding the termination of the Contract for any reason.
5.2 Within the validity period of Contract, Both parties shall take proper measures to keep the materials or information strictly confidential. The other party shall not disclose or divulge to any third party without prior written consent of one party.
5.3 Either party shall be obliged to keep confidential any secret information of the other party which either party and its personnel may obtain or be accessible to in the course of the performance of Contract. Either party shall not make use of or disclose such secret information obtained from the other party without prior written permission issued by the other party.
Article 6 Taxes and Duties
6.1 All taxes and duties in connection with and in the execution of Contract levied by the Chinese government on Client in accordance with the tax laws of PRC shall be borne by Client.
6.2 All taxes and duties levied by the Chinese government on Consultant, in connection with and in the execution of Contract, according to Chinese tax laws and the agreement between the government of PRC and the government of Consultant's country for the reciprocal avoidance of double taxation and the prevention of fiscal evasion with respect to taxes on income shall be borne by Consultant.
Client is legally obliged to withhold, as a withholding agent, the amount of taxes pro rata each taxable payment under Contract and pay them to the relevant Chinese tax authorities. After receiving the tax receipts issued by the relevant Chinese tax authorities for the aforesaid withholding taxes, Client shall forward them to Consultant without undue delay.
6.3 All taxes and duties arising outside PRC in connection with and in the execution of Contract shall be borne by Consultant.
Article 7 Warranty
7.1 Consultant warrants that he has the experience and capability to efficiently and expeditiously perform the services in a satisfactory manner and that the services performed by him under this Contract shall be performed by competent personnel in accordance with accepted standards.
7.2 In the event of a failure of Consultant to provide to Client satisfactory services within the scope of work described in Appendix at any time for any reason within the control of the Consultant, Client may notify Consultant of such dissatisfaction. Consultant
shall be afforded a period of days to correct or remedy the matter. Should Consultant within the time afforded by Client fail to correct or remedy the matter to the satisfaction of Client, all charges shall
cease forthwith until such time as Consultant is able to provide satisfactory services in accordance with the Scope of work described in Appendix.
7.3 Consultant guarantees to Client that he shall, after receipt of notice from Client, promptly correct at no cost any errors in the services arising out of the negligent performance thereof.
Article 8 Ownership of Technical Service Reports
8.1 Final version of the technical service report submitted to Client and all relevant data such as maps, plans and supporting material compiled in performing the Scope of Services, shall be the property of Client. Such materials shall be sorted and indexed by Consultant prior to transmission to Client.
8.2 Consultant shall be permitted to retain copies thereof, provided however that such materials, including the material furnished by Client as stated in Article 5 of this Contract, shall not be used by Consultant for purposes not related with this Project without the prior written approval of Client.
Article 9 Assignment
9.1 Neither Client nor Consultant shall assign or sublet their rights or obligations hereunder without the prior written consent of the other party.
Article 10 Termination
10.1 If, due to the responsibility of Consultant, the technical service reports have not been delivered at dates according to the delivery schedules as stipulated in Article 4 of the Contract,
Consultant shall be obliged to pay to Client penalty for such delay in delivery at the following rates:
A. ______ percent (____%) of the total contract price per week
for the first four weeks;
B. _____ percent (____%) of the total contract price per week from the fifth week to the eighth week;
C. ______ percent (____%) of the total contract price per week from the ninth week of delay.
Odd days less than one (1) week shall be counted as one (1) week for calculating the liquidated damage.
10.2 The total liquidated damage for late delivery shall not exceed ______ percent (____%) of the total contract price. Payment of the liquidated damage for late delivery shall not release
Consultant from its obligation to deliver technical service reports.
10.3 Client may, without prejudice to any other remedy for Consultant's following breach of Contract, terminate Contract in whole or in part by a written notice of default send to Consultant, if Consultant
A. Fails to deliver any or all of technical service reports
within______(____) days after the scheduled delivery date as
specified in Article 1; or
B. Fails to make the technical service reports meet the minimum level of Acceptance Standards as specified in Appendix 1.
Consultant shall refund to Client all the payments effected by Client to Consultant plus an interest at the rate of______ percent (____%) per annum in case of such a termination.
10.4 Either party may, without prejudice to any other remedy, terminate Contract in whole or in part by a written notice send to
the other party, if the other party.
A. fails to perform its confidentiality obligation under Contract; or
B. fails to perform any other obligations under Contract except minor parts thereof, and does not remedy for its failure within a period of______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or
C. becomes bankrupt or insolvent; or
D.Affected by any event of Force Majeure for more than ______ days.
Article 11 Force Majeure
11.1 Should either party be prevented from performing any of its obligations under Contract due to event of Force Majeure, such as war, serious fire, typhoon, earthquake, flood and any other events which could not be expected, avoided and overcome, the affected party shall notify the other party of its occurrence by fax and send by
registered airmail a certificate issued by the competent authorities or agency within fourteen (14) days following its occurrence.
11.2 The affected party shall not be liable for any delay or failure in performing any or all of its obligations due to the event
of Force Majeure. However, the affected party shall inform the other party by fax the termination or elimination of the event of Force Majeure without delay.
11.3 Both parties shall proceed with their obligations immediately after the cease of the event of Force Majeure or removal of the effects. The validity period of Contract and/or the scheduled period for relative execution of Contract shall be extended correspondingly.
Article 12 Arbitration
12.1 Any dispute arising from or in connection with this Contract shall be submitted to China International Economic and Trade Arbitration Commission，Shenzhen Commission for arbitration in accordance with the Commission's arbitration rules in effect at the time of applying for arbitration. The arbitral award is final and binding upon both parties and the applicable law is the material law of P.R.C.
12.2 Notwithstanding any reference to arbitration, both Parties shall continue to perform their respective obligations under the Contract unless otherwise agreed.
Article 13 Language and Standards
13.1 Correspondance except this Contract between Client and Consultant, data and documents made available by Client to Consultant and the technical service reports and drawings prepared by Consultant shall be in the English language.
13.2 Measures shall be written in the metric system.
Article 14 Governing Law
14.1 The construction, validity and performance of this Contract shall be governed by the laws of the People's Republic of China.
Chapter 15 Effectiveness of the Contract and Miscellaneous
15.1 Both parties shall make effort to obtain the approval from the respective authorities, if necessary, within thirty (30) days after Contract is signed by the authorized representatives of the two parties. Either Party shall notify in writing the other party of the approval date. The later date of approval shall be taken as the Date of Effectiveness of Contract.
15.2 Contract shall be valid and remain in force for_______(____) years from the Date of Effectiveness.
15.3 The outstanding credit and debt between the parties under Contract shall not be affected upon the termination or expiration of Contract.
15.4 Appendices hereof shall be integral parts of Contract and have the same legal force as the text of Contract itself. The text of Contract shall prevail in case of any discrepancies between the text of Contract and Appendices.
15.5 All amendments, supplements, subtractions, or alterations to Contract shall be made in writ
雇佣合同范本 Party A:_____________ Party B:_____________ I. Party A wishes to engage the service of party B___________as______________. The two Parties, in a spirit of friendly cooperation, agree to sign this contract and pledge to fulfill conscientiously all the obligations stipulated in it. II. The period of service will be from the _______day of ________ ,_____to the ________day of ________ . III. The duties of Party B (see attached pages) IV. Party Bs monthly salary will be Yuan RMB (About USD), the pay day is every month_______ .If not a full month, the salary will be will be prorated (days times salary/30). V. Party As Obligations 1．Party A shall introduce to Party B the laws, decrees and relevant regulations enacted by the Chinese government, the Party As work system and regulations concerning administration of foreign teachers. 2. Party A shall conduct direction, supervision and evaluation of Party Bs work. 3. Party A shall Provide Party B with necessary working and living conditions. 4. Party A shall provide co-workers for the first week if necessary. VI. Party Bs obligations 1. Party B shall observe the laws, decrees and relevant regulations enacted by the Chinese government and shall not interfere in Chinas internal politics affairs. 2. Party B shall observe Party As work system and regulations concerning administration of foreign teachers and shall accept Party As agreement, direction, supervision and evaluation in regard to his/her work. Without Party As consent, Party B shall not render service elsewhere or hold concurrently any post unrelated to the work agreed on with Party A. 3. Party B shall complete the tasks agreed on schedule and guarantee the quality of work. 4. Party B shall respect Chinas religious policy, and shall not conduct religious activities incompatible with the status of a teacher. 5. Party B shall respect the Chinese peoples moral standards and customs. V. Revision, Cancellation and Termination of the Contract 1. Both Parties should abide by the contract and should refrain from revising, canceling, or terminating the contract without mutual consent. 2. The contract can be revised, cancelled, or terminated with mutual consent. Before both parties have reached an agreement, the contract should be strictly observed. 3. Party A has the right to cancel the contract with written notice to Party B under the following conditions. (1) Party B does not fulfill the contract or does not fulfill the contract obligations according to the terms stipulated, and has failed to amend after Party A has pointed it out. (2) According to the doctors diagnosis, Party B cannot resume normal work after 30 days sick leave. 4. Party B has the right to cancel the contract with a written notice to party A under the following conditions:
英文技术服务合同范本 Contract No.:________________________. Date of Signature:____________________. Place of Signature:____________________. This Contract is made and entered into through friendly negotiation by and between China____________________ (hereinafter referred to as “Client”), as one party, and____________________ (hereinafter referred to as“Consultant”),as the other party, concerning the technical consultancy service of__________, under the following terms and conditions: Article 1 Contents of Technical Consultancy Service 1.1 Whereas Client desires to obtain the technical consultancy service of from Consultant and Consultant has agreed to perform such services. 1.2 The Scope of Technical Services is defined in Appendix 1. 1.3 The Time Schedule for the Services is shown in Appendix 2. 1.4 The Manning Schedule is described in Appendix 3. 1.5 Consultant shall complete the Services within__________months from the Effective Date of this Contract and furnish the final technical service report, including drawings, designing documents, all kinds of standards and photos, within____months. Consultant shall keep aware, free of charge, Client of the latest development of similar projects and any progress made in order to improve the designing of the project.
国际合作框架协议范本(规范版) Model international cooperation framework agreement (norm ative version) 甲方：___________________________ 乙方：___________________________ 签订日期：____ 年 ____ 月 ____ 日 合同编号：XX-2020-01
国际合作框架协议范本(规范版) 前言：本文档根据题材书写内容要求展开，具有实践指导意义，适用于组织或个人。便于学习和使用，本文档下载后内容可按需编辑修改及打印。 甲方： 代表： 地址： 电话： 传真： 乙方： 代表： 地址： 电话： 传真： 甲乙双方本着互利互惠、共同发展的原则，经过友好协商，决定充分利用双方各自的优势，资源互补，开展留学预备课程，特制定本合作框架协议。
一、合作内容 甲乙双方共同开发设计并开办留学预备课程，共同确定培养目标，制定教学计划，安排课程设置。 1、预备班学制：______年。 2、预备班培养目标： （1）提高学生的英语综合能力，并达到可以办理出国留学的英文水平。 （2）加强学生专业知识水平，为学生在国外的专业学习奠定基础。 （3）达到与国外交流学校课程衔接模式的实现。 3、预备班结束后前往国外学习的国家：澳大利亚、英国、新西兰、加拿大等。 4、预备班收费标准：______元人民币（不含国外使馆签证申请费、个人出国材料公证费以及国外学校报名费）。 二、双方权利和义务 1、甲方权利和义务 （1）负责招生工作，包括制定招生计划，招生宣传等。
（2）负责设计教学方案。 （3）负责安排教学相关工作，包括教师招聘、教学场地的安排和教材的选择等。 （4）负责向学生收取学费和签证服务费。 （5）负责学生管理。 （6）承担所有教学成本及教职员工的薪金。 （7）负责组织安排家长和学生就签证文件的准备、出国前签证辅导、及临行辅导等之会议。 2、乙方权利和义务 （1）负责与海外合作院校联络和沟通，并负责接待与招待外方人员。 （2）负责甲方工作人员的业务培训。 （3）辅助甲方设计教学方案，给教学计划及方案提出建议和意见。 （4）帮助甲方聘请外籍教师、英文教师。 （5）帮助学生联络国外合作院校并取得录取信。
NO.: DATE: FAX: FAX: This Contract is made by and between the Buyers and the Sellers, whereby the Buyers agree to buy and the Sellers agree to sell the under mentioned commodity according to the terms and conditions stipulated below: 买方与卖方就以下条款达成协议： 1. COMMODITY: 2. COUNTRY AND MANUFACTURERS: 原产国及造商： 3. PACKING: To be packed in standard airway packing. The Sellers shall be liable for any damage of the commodity and expenses incurred on account of improper packing and for any rust attributable to inadequate or improper protective measures taken by the sellers in regard to the packing. 包装：标准空运包装。如果由于不适当的包装 而导致的货物损坏和由此产生的费用，卖方应对此负完全的责任。 4. SHIPPING MARK: The Sellers shall mark on each package with fadeless paint the package number, gross weight, net weight, measurement and the wordings: "KEEP AWAY FROM MOISTURE" "HANDLE WITH CARE" "THIS SIDE UP" etc. and the shipping mark: 唛头：卖方应用不褪色的颜料在每个箱子外部刷上箱号、 毛重、净重、尺寸，并注明“防潮” “小心轻放” 、“此面向上”等，唛头为 : 5. TIME OF SHIPMENT （装运期）：within days after receipt of L/C 6. P ORT OF SHIP MEN （装运港）： 7. PORT OF DESTINATIO N （目 的港）：CONTRACT THE BUYERS: ADDRESS : TEL: THE SELLERS: ADDRESS: TEL: , CHINA
编号：_______________本资料为word版本，可以直接编辑和打印，感谢您的下载 英文合同格式 甲方：___________________ 乙方：___________________ 日期：___________________
NO.11 ZHONGSHAN STREET XIAMEN FUJIAN CHINA SALES CONFIRMATION ［打印预览］［保存］［诅出］ 销货合同（Sales Confirmation） 国际货物买卖合同一般金额大，内容繁杂，有效期长，因此许多国家的法律要求采用书面形式。书面合同主要有两种形 式，即正式合同（CONTRACT ）和合同确认书（CONFIRMATION ）,虽然其繁简不同，但具有同等法律效力，对买卖双方均有约束力。大宗商品或成交额较大的交易，多采用正式合同；而金额不大，批数较多的小土特产品或轻工产品，或者已订立代理、包销等长期协议的交易
多采用合同确认书（亦称简式合同）。 无论采哪种形式，合同抬头应醒目注明SALES CONTRACT 或SALES CONFIRMATION （对销售合同或确认书而言） 等字样。一般来说出口合同的格式都是由我方（出口公司）事先印制好的，因此有时在SALES CONFIRMATION 之前加上 出口公司名称或是公司的标志等（我外贸公司进口时也习惯由我方印制进口合同）。交易成立后，寄交买方签署 （countersign ）,作为交易成立的书面凭据。 在SimTrade 中，买卖双方都可以起草合同，填写时只需将名称、地址等内容作相应变化既可。如合同由买方起草时，上方空白栏则填入进口商公司名称及地址，以此类推。 报表上方两行空白栏 为出口商公司抬头，须分别填写出口商的英文名称及地址。 如:GRAND WESTERN FOODS CORP. Room2501, Jiafa Mansion, Beijing West road, Nanjing 210005, P. R. China Messrs 详细填列交易对象（即进口商）的名称及地址。 在SimTrade 中，进口商的详细资料请在淘金网”的公司库里查询。 如：Dynasty Furniture Manufacturing Ltd. 3344-54th Avenue S. E. Calgary, Alberta T2C OAS Canada No. 销货合同编号，由卖方自行编设，以便存储归档管理之用。 在SimTrade 中，该编号已由卖方在起草合同时填入，单据中不能再更改。 Date 填写销货合同制作日期。 如：2005年2月18日，可以有以下几种日期格式填法： 1.2005-02-18 或02-18-2005 2. 2005/02/18 或02/18/2005 3. 050218 （信用证电文上的日期格式） 4. February 18, 2005 或Feb 18, 2005 Product No. 填写货号，销货合同上应记明各种货物编号，以求联系沟通方便。 在SimTrade 中，货号必须选择淘金网”的产品展示”里已有的商品编号。 Description 品名条款。此栏应详细填明各项商品的英文名称及规格，这是买卖双方进行交易的物质基础和前提。对商品的具体描述说明是合同的主要条款之一，如果卖方交付的货物不符合合同规定的品名或说明，买方有权拒收货物、撤销合同并提出损害赔偿。 在SimTrade 中，商品的详细资料请在淘金网’产品展示”里查找，此栏目填写必须与淘金网的商品详细资料里商品英 文名称及英文描述完全一致。 例1 :产品01005 的商品描述: CANNED SWEET CORN 3060Gx6TINS/CTN 例2:产品04001 的商品描述：WOODEN TEA SERVICE
编号：YB-HT-021964 战略合作协议书范本通用版 The agreement stipulates mutual obligations and rights that must be performed 甲方： 乙方： 签订日期：年月日 精品合同 / Word文档 / 文字可改 编订：Yunbo Design
战略合作协议书范本通用版 甲方：______人民政府 乙方：______大学 在已经来临的知识经济时代，70%以上的信息和科学创新成果均是以英语为载体进行传播的，并且随着互联网技术的发展和中国加入世界贸易组织，英语在人们生活、学习、工作中交流频率也将会越来越高。 为此，______人民政府决定以政府行为强化中小学英语教学，实施英语教育工程，通过培训英语师资、聘请外籍教师和优秀大学生参与中小学英语教学活动等方式，提高______中小学生的英语听说能力，全面促进中小学生英语学科素质的发展，使英语课程成为全区性的优势学科，为建设“文化发达，经济繁荣，服务一流，现代文明”的______注入新的活力，为教育基础厚实的______
增加新的现代文化积淀。 为了实现以上目标，甲方(______人民政府)和乙方(______大学)经过充分酝酿和协商，达成如下协议： 一、甲方为了落实《中共______市______委、______市______人民政府关于加速发展教育事业的决定》《______市______人民政府教育事业发展“十五”计划》中关于“把英语学科建设成为我区的优势学科”的战略目标，诚恳邀请乙方给予甲方全区英语教学、科研、师资培训、聘请外籍教师等方面以多方面的指导和支持。 二、作为广东省属涉外型重点大学的乙方本着服务地方的宗旨，积极响应省委领导加强广东省英语教学工作的指示精神，接受甲方的邀请，并积极发挥乙方外语教学、培训、科研和师资等方面的优势，给予甲方以力所能及的支持。 三、乙方对甲方的支持，主要包括：对______中小学英语教学改革、教学研究提供指导和咨询;分期分批培训______英语教师的口语和听力，建立水平测评系统;创造条件开设委托培养性质的
国际贸易合同协议书样本中英文对照 文件编号TT-00-PPS-GGB-USP-UYY-0089
CONTRACT NO.: DATE: THE BUYERS: ADDRESS : TEL: FAX: THE SELLERS: ADDRESS: TEL: FAX: This Contract is made by and between the Buyers and the Sellers, whereby the Buyers agree to buy and the Sellers agree to sell the under mentioned commodity according to the terms and conditions stipulated below: 买方与卖方就以下条款达成协议： 1. COMMODITY: 2. COUNTRY AND MANUFACTURERS: 原产国及造商： 3. PACKING: To be packed in standard airway packing. The Sellers shall be liable for any damage of the commodity and expenses incurred on account of improper packing and for any rust attributable to inadequate or improper protective measures taken by the sellers in regard to the
XIAOLING TRADE CO.,LTD NO.11 ZHONGSHAN STREET XIAMEN FUJIAN CHINA SALES CONFIRMATION Dear Sirs, [打印预览][保存][退出]
销货合同(Sales Confirmation) 国际货物买卖合同一般金额大，内容繁杂，有效期长，因此许多国家的法律要求采用书面形式。书面合同主要有两种形式，即正式合同（CONTRACT）和合同确认书（CONFIRMATION），虽然其繁简不同，但具有同等法律效力，对买卖双方均有约束力。大宗商品或成交额较大的交易，多采用正式合同；而金额不大，批数较多的小土特产品或轻工产品，或者已订立代理、包销等长期协议的交易多采用合同确认书（亦称简式合同）。 无论采哪种形式，合同抬头应醒目注明SALES CONTRACT或SALES CONFIRMATION（对销售合同或确认书而言）等字样。一般来说出口合同的格式都是由我方（出口公司）事先印制好的，因此有时在SALES CONFIRMATION之前加上出口公司名称或是公司的标志等（我外贸公司进口时也习惯由我方印制进口合同）。交易成立后，寄交买方签署（countersign），作为交易成立的书面凭据。 在SimTrade中，买卖双方都可以起草合同，填写时只需将名称、地址等内容作相应变化既可。如合同由买方起草时，上方空白栏则填入进口商公司名称及地址，以此类推。 报表上方两行空白栏 为出口商公司抬头，须分别填写出口商的英文名称及地址。 如：GRAND WESTERN FOODS CORP. Room2501, Jiafa Mansion, Beijing West road, Nanjing 210005, P. R. China Messrs 详细填列交易对象（即进口商）的名称及地址。 在SimTrade中，进口商的详细资料请在“淘金网”的公司库里查询。 如：Dynasty Furniture Manufacturing Ltd. 3344-54th Avenue S. E. Calgary, Alberta T2C OAS Canada No. 销货合同编号，由卖方自行编设，以便存储归档管理之用。 在SimTrade中，该编号已由卖方在起草合同时填入，单据中不能再更改。 Date 填写销货合同制作日期。 如：2005年2月18日，可以有以下几种日期格式填法： 1. 2005-02-18或02-18-2005 2. 2005/02/18或02/18/2005 3. 050218（信用证电文上的日期格式） 4. February 18, 2005或Feb 18, 2005 Product No. 填写货号，销货合同上应记明各种货物编号，以求联系沟通方便。 在SimTrade中，货号必须选择“淘金网”的“产品展示”里已有的商品编号。 Description
编号：_____________ 国际技术咨询服务合同 委托方：___________________________ 咨询方：___________________________ 签订日期：_______年______月______日
中国________________________公司（以下简称委托方）为一方，_____国 __________________________ 公司（以下简称为咨询方）为另一方，双方就 _________________________的技术咨询服务，授权双方代表按下列条款签订本合同。 This Contract is made and entered into through friendly negotiation by and between China_________________________ (hereinafter referred to as “Client”)， as one party， and__________________________ (hereinafter referred to as“Consultant”)，as the other party， concerning the technical consultancy service of________________________， under the following terms and conditions: 第一条合同内容 Article 1 Contents of Technical Consultancy Service 1.1 委托方希望获得咨询方就___________________________提供的技术咨询服务，而咨询方愿意提供此项服务。 Whereas Client desires to obtain the technical consultancy service of from Consultant and Consultant has agreed to perform such services. 1.2 技术咨询服务范围详见本合同附件一。 The Scope of Technical Services is defined in Appendix 1. 1.3 技术咨询服务的进度安排详见本合同附件二。 The Time Schedule for the Services is shown in Appendix 2. 1.4 技术咨询服务的人员安排见本合同附件三。 The Manning Schedule is described in Appendix 3.
国际买卖合同范本（中英文对照版） 买方The Buyer: 地址Address Tel:Fax: 卖方The Seller: 地址：Address Tel:Fax: 本合同由买卖双方订立，根据本合同规定的条款，买方同意购买，卖方同意出售下述商品：This Contract is made by and between the Buyers and Sellers, whereby the Buyers agree to buy and the Sellers agree to sell the under-mentioned commodity according to the terms and conditions stipulated below: (1)货名及规格Commodity & Specification (2)数量Qty. (3)单价Unit Price (4)总价Total Amount (5)原产公司：COUNTRY OF ORIGIN : (6)装运期限：TIME OF SHIPMENT: (7)装运口岸：PORT OF SHIPMENT： (8)到货目的地：DESTINATION： (9)保险：INSURANCE： 由卖方按合同金额110％投保一切险和战争险 All Risks and War Risk for 110% contract value to be covered by the Seller. (10)运输方式：TERM OF SHIPMENT:空运By air (11)包装：PACKING： 须用坚固的新木箱包装，适合长途空运/陆运，防湿、防潮、防震、防锈、耐粗暴搬运。由于包装不良所发生的损失，由于采用不充分或不妥善的防护措施而造成的任何锈损、破损，卖方应负担由此而产生的一切费用和损失。包装箱内应包含一整套服务操作手册。卖方使用的木质包装应经薰蒸处理，并在木质包装表面标上清晰的IPPC标识。 To be packed in new strong wooden case(s) suitable for long distance air/land transportation and well protected from dampness, moisture, shock, rust and rough handling. The Sellers shall be liable for any damage to the goods on account of improper packing and for any rust damage and break damage attributable to inadequate or improper protective measures taken by the Sellers, and in such case or cases any and all losses and / or expenses incurred in consequence thereof shall be borne by the Sellers. One full set of service and operation manuals concerned shall be enclosed in the case(s). The wood packaging the Seller used shall be fumigated and marked with “IPPC”on the surface of wood packaging. (12)唛头：SHIPPING MARK: 卖方应在每件包装上，用不褪色油墨清楚地标刷件号、尺码、毛重、净重、“此端向上”、“小心轻放”、“切勿受潮”等字样，并刷有下列唛头:
销售合同 SALES CONTRACT 买方：JOONAS&CO.,LTD, 10 LOUIS PASTEUR STEET POR T LOUIS MAURITIUS 合同号/Contract No: BF20100601 The Buyer : JOONAS&CO.,LTD, 10 LOUIS PASTEUR STEET PORT LOUIS MAURITIUS TEL：230-2400778 FAX: 230-2408285 卖方：唐山丰润百丰商贸 日期/Date: 2010-05-29 TEL: 0086 -315-5505831 FAX: 0086-315-5505833 The Seller: T angshan fengrun baifeng Trading Co.ltd 兹经买卖双方同意,由买方购进,卖方出售下列货物,并按下列条款签订本合同: This CONTRACT is made by and between the Buyers and Sellers; whereby the Buyer agrees to buy and the Seller agrees to sell the under mentioned goods on the terms and conditions stated below: Description of Goods: As follows. 1.原产地和制造厂家（Country of Origin and Manufacturer）： 中国China T angshan fengrun baifeng Trading Co.ltd 2.包装（Packing）：STANDARD EXPORT PACKAGING 3.Shipment（装运方式）：合同中货物全部用20’集装箱海运In Contract by 20’ Container. 4.装运期限（Time of Shipment）：WITHIN15-20 WORKING DAYS AFTER RECEIPT OF 30%T/T 5.装运口岸（Port of Loading）：上海中国SHANGHAI China 6.目的口岸（Port of Destination）：Port Louis, Mauritius 7.付款条款(T erms of Payment）：30%DOWN PA YMENT + 70% T/T AFTER RECEIVED THE COPY OF B/L 8.签约合同（Sign of Contract）：本合同传真有效This contract will valid for fax contract sign 9.人力不可抗议(Force Majeure)：由于水灾，火灾，地震，干旱，战争或协议一方无法预见，控制，避免和克服的其他事件导致不能或暂时不能全部或部分履行本协议，该方不负责托。但是，受不可抗议力事件影响的一方必须尽快将发生的时间通知另一方，并在不可抗议力事件发生15（拾伍）天内将有关机构的不可抗议力事件的证明寄交对方。Either party shall not be held responsible for failure or delay to perform all or any part of this agreement due to flood, fire, earthquake, draught, war or any other events which could not be predicted, controlled, avoided, or overcome by the relative party. However, the party affected by the event of Force Majeure shall inform the other party of its occurrence in writing as soon as possible and thereafter send a certificate of the event issued by the relevant authorities to the other party within 15 days after it’s occurrence. 10. 货物要求（CRC requirements）: 10.1 每件货物重量大约5吨。Weight of Coils: About 5 tons
英文技术服务合同模板 篇一：国际技术咨询服务合同 （中英文 ）】 国际技术咨询服务合同 （中英文） technical consultancy service contract 合 同 号： contract no ___ 公司（以下简称委托方）为一方， ___________ 公司（以下简称为咨询方）为另一方，双方就 的技术咨询服务，授权双方代表按下列条款签订本 合同。 this contract is made and entered into through friendly negotiation by and between china ___________________________________________ (hereinafter referred to as “ client ” ), as one party, and ________________________ (hereinafter referred to as “ consultant ”),as the other party, concerning the technical consultancy service of __________ , under the following terms and conditions: 第一条 合同内容 article 1 contents of technical consultancy service whereas client desires to obtain the technical consultancy service of from consultant and consultant has agreed to perform such services. 1.2 技术咨询服务范围详见本合同附件一。 签订日期： date of signature: 签订地点： place of signature: 中国 1.1 委托方希望获得咨询方就 方愿意提供此项服务。 提供的技术咨询服务，而咨询
中英文项目合作协议书范本 " Project cooperation agreement": 甲方：_________乙方：_________经甲、乙双方共同协商，本着互惠互利、共同发展 Party A: _ _ _ _ _ _ _ _ _ B: _ _ _ _ _ _ _ _ _ by a, B both negotiation, mutual benefit, common development 《项目合作协议范本》正文开始>>甲方：_________ " Project cooperation agreement" start of text >> A: _ _ _ _ _ _ _ _ _ 乙方：_________ B: _ _ _ _ _ _ _ _ _ 经甲、乙双方共同协商，本着互惠互利、共同发展，使中国秘书尽早走向职业化，达成如下合作协议： The A, B both negotiation, mutual benefit, common development, make Chinese secretary as early as possible to occupation, reached the following agreement: 一、甲方授权乙方为_________省_________市_________合作基地。同时为了维护双方的合法权益，乙方一次性向甲方交纳履约保证金_________元。 One, Party A authorizes Party B to _ _ _ _ _ _ _ _ _ province _ _ _ _ _ _ _ _ _ city _ _ _ _ _ _ _ _ _ cooperation base. At the same time in order to maintain the lawful rights and interests of both parties, Party B shall pay to party a one-off performance bond _ _ _ _ _ _ _ _ _ element. 二、甲方职责： In two, a duty: 1.向乙方提供合作范围内的《授权书》; 1 Party A shall provide to Party B within the scope of cooperation" authorization"; 2.向乙方颁发_________合作基地的铜牌; 2 Party B _ _ issued _ _ _ _ _ _ _ cooperation base bronze; 3.负责协助乙方办理_________证书; 3 assisting Party B with the _ _ _ _ _ _ _ _ _ certificate; 4.向乙方提供甲方的办学许可证、收费许可证复印件等有关证明文件; 4 Party A shall provide to Party B Party school license, charging a copy of the license and other relevant documents; 5.负责学生入学资格的审核、面试及录取工作; 5 is responsible for student admission qualification examination, interview and enrollment; 6.负责乙方教学大纲的制定及教学质量的监督和检查; 6 be responsible for working out a syllabus and teaching quality supervision and inspection; 7.学生在甲方学习期满成绩合格者，由甲方负责毕业证书的发放; 7 students in a learning period achievement eligible, by Party A is responsible for the issuance of a certificate of graduation; 8.精品秘书班、现代高等秘书班的学生学习期满成绩合格者，甲方负责安排就业。 8 fine secretary class, modern advanced secretarial class student learning expires achievement eligible, Party A is responsible for arranging employment. 三、乙方职责： Three, B: 1.负责在当地办理合作办学的有关手续; 1 is responsible for the local management cooperation in running schools of the relevant procedures;