英文技术服务合同范本4篇Model contract for technical services in English
甲方：
乙方：
签订日期：年月日
英文技术服务合同范本4篇
小泰温馨提示：合同是民事主体之间设立、变更、终止民事法律关系的协议。依法成立的合同，受法律保护。本文档根据服务合同内容要求和特点展开说明，具有实践指导意义，便于学习和使用，本文下载后内容可随意修改调整及打印。
本文简要目录如下：【下载该文档后使用Word打开，按住键盘Ctrl键且鼠标单击目录内容即可跳转到对应篇章】
1、篇章1：英文技术服务合同范本
2、篇章2：翻译服务合同英文模板文档
3、篇章3：翻译服务合同英文模板文档
4、篇章4：翻译服务合同英文模板文档
篇章1:英文技术服务合同范本
Contract No.:________________________.
Date of Signature:____________________.
Place of Signature:____________________.
This Contract is made and entered into through friendly negotiation by and between
China____________________ （hereinafter referred to as “Client”）, as one party, and____________________ （hereinafter referred to as“Consultant”）,as the other party, concerning the technical consultancy service of__________, under the following terms and conditions:
Article 1 Contents of Technical Consultancy Service
1.1 Whereas Client desires to obtain the
technical consultancy service of from Consultant and Consultant has agreed to perform such services.
1.2 The Scope of Technical Services is defined in Appendix 1.
1.3 The Time Schedule for the Services is shown
in Appendix 2.
1.4 The Manning Schedule is described in Appendix 3.
1.5 Consultant shall complete the Services
within__________months from the Effective Date of this Contract and furnish the final technical service
report, including drawings, designing documents, all kinds of standards and photos, within____months. Consultant shall keep aware, free of charge, Client of the latest development of similar projects and any progress made in order to improve the designing of the project.
Article 2 Both Parties' Responsibility and Liability
2.1 Client shall furnish to Consultant the pertinent data, technical service reports, maps and information available to him and shall give to Consultant the reasonable assistance necessary for carrying out of his duties. Particularly Client shall nominate a general representative who shall be available at reasonable time.
2.2 Client shall assist Consultant with the responsible authorities for obtaining visas, work permits and other documents required by Consultant to enter the country and to have access to the Site of the Project. The above expenses shall be borne by Consultant.
2.3 Consultant shall furnish a sufficient number of competent personnel to perform its obligation hereunder, in addition to those personnel specifically listed in Appendix
3.All personnel employed by Consultant in carrying out the work shall be exclusively Consultant's responsibility, and Consultant shall hold Client harmless from any claims of any kind by Consultant's personnel arising out of any acts by Consultant or its personnel in connection with the work performed hereunder.
2.4 Consultant shall provide Client all the technical technical service reports and relevant documentation within the Scope of Technical Services and within the Time Schedule of the Time Schedule for the Services.
2.5 Consultant shall assist Client＇S personnel
in his country in obtaining visas and in arranging lodgings. Hotel and boarding expenses shall be borne by Client. Consultant shall supply to Client＇S
personnel office space and necessary facilities as well as transportation.
2.6 Consultant shall be responsible for and shall indemnify Client and his employee in respect of injury to person or damage to property occurring in connection with the services, to the extent that such damage or injury directly results from negligence of Consultant's personnel while engaged in activities under this shall be liable only to the work under this Contract.
2.7 Any and all liability of Consultant with respect to this Contract shall be limited to the Total Contract Price received by Consultant for his profession services and shall terminate upon
expiration of the warranty period set forth in Article 7.3.
Article 3 Price and Payment
3.1 The total contract price is__________（say
__________________only） in________（currency）. The
breakdown prices of the above mentioned total contract price are as follows:
Contract Price for Item 1: ______（say
____________only） in________ （currency）; Contract Price for Item 2: ______（say ____________only）
in________ （currency）; Contract Price for Item 3:
______（say ____________only） in________ （currency）; Contract Price for Item 4: ______（say
____________only） in________ （currency）.
3.2 The total contract price will include all the service and technology provided by Consultant. The
total contract price shall be firm and fixed and shall not fluctuate with any inflation. The total contract price shall include all charges and expenses incurred by Consultant in performing his obligations both in
his own country and in the People's Republic of China and includes the expenses incurred in sending the Technical Documentation to Client's office by all
kinds of forms.
In the event of Force Majeure as defined in the Contract, the total contract price shall be readjusted through friendly negotiations between the parties. If Client requires services not contemplated in the Scope of Services the parties shall friendly discuss an amendment to the
total contract price. Any such amendment shall be in writing countersigned by both parties. This document shall then form integral part of the Contract.
3.3 All payments to be made by Client to Consultant under the present Contract shall be made by telegraphic transfer. In case of any payment by Client, the payment shall be effected through__________in
China to _________ for the account of Consultant.
In consideration for the services provided by Consultant hereunder, Client shall effect the payment to Consultant in accordance with the following manner and percentage:
3.3.1 _______ percent （________ %） of the total contract price, i.e._____________ （Say: ________ only）, shall be paid by Client to Consultant within ________ （____） days after the client has received the following documents provided by Consultant and found them in order.
A. One
（1） original and two
（2） duplicate copies of Consultant's government approval, or a written statement of the competent authorities or relevant agency of Consultant's country certifying that such document is not required;
B. One
（1） original and one
（1） duplicate copy of Irrevocable Letter of Guarantee for advance payment issued by Consultant's Bank in favor of Client covering_______（Say:________ only）, specimen of which is as per Appendix 4;
C. Five （5） copies of profoma invoice covering the total contract price;
D. Five （5） copies of manually signed
commercial invoice indicating the amount to be paid;
E. Two （2） copies of sight draft.
The said shall be delivered by Consultant not
later than ____days after the effective date of the
________present Contract.
3.3.2 ________percent （____%） of the Contract price for Item 1, i.e._________ （Say: __________ only）shall be paid by Client to Consultant within _____
（__） days after Consultant has received the
following documents provided by Consultant and found them in order.
A. Ten （10） copies of technical service report on Item 1;
B. Five （5） copies of manually signed
commercial invoice indicating the amount to be paid;
C. Two （2） copies of sight draft.
3.3.3 ________ percent （____%） of the Contract price for Item 2, i.e. ___________ （Say: ____________ only） shall be paid by Client to Consultant within
________ （___） days after Licensee has received the following documents provided by Consultant and found themin order.
A. Ten （10） copies of technical service report on Item 1;
B. Five （5） copies of manually signed
commercial invoice indicating the amount to be paid;
C. Two （2） copies of sight draft.
3.3.4 ________percent （____%） of the Contract price for Item 3, i.e._________ （Say: __________ only）shall be paid by Client to Consultant within _____
（__） days after Consultant has received the
following documents provided by Consultant and found them in order.
A. Ten （10） copies of technical service report on Item 1;
B. Five （5） copies of manually signed
commercial invoice indicating the amount to be paid;
C. Two （2） copies of sight draft.
3.3.5 ________percent （____%） of the Contract price for Item 4, i.e._________ （Say: __________ only）shall be paid by Client to Consultant within _____
（__） days after Consultant has received the
following documents provided by Consultant and found them in order.
A. Ten （10） copies of technical service report on Item 1;
B. Five （5） copies of manually signed
commercial invoice indicating the amount to be paid;
C. Two （2） copies of sight draft.
3.3.6 ________percent （____%） of the Total Contract price , i.e._________ （Say: __________ only）shall be paid by Client to Consultant within _____
（__） days after Consultant has received the
following documents provided by Consultant and found them in order.
A. Five （5） copies of manually signed commercial invoice indicating the amount to be paid;
B. Two （2） copies of sight draft.
3.4 In case Consultant is liable for paying to Client the penalty under the Contract, Client shall have the right to deduct it from any said payment.
3.5 The banking charges of both parties incurred in China for the execution of the Contract shall be borne by Client and those incurred outside China shall be borne by Consultant.
Article 4 Delivery Schedule
4.1 The deadline for the arrival of the Technical service reports CIF _____ are:
A. Technical service report on Item 1 :
_________months after effectiveness of the Contract;
B. Technical service report on Item 2 :
_________months after effectiveness of the Contract;
C. Technical service report on Item 3 :
_________months after effectiveness of the Contract;
D. Technical service report on Item 4 :
________months after effectiveness of the Contract.
4.2 Consultant will inform Client by Fax when the Technical service reports are airmailed to Client indicating the date and number of airway bill. Client will inform Consultant when the Technical service reports have been received.
4.3 Should any document be missing or damaged during the transport Consultant shall be notified accordingly and within two （2） weeks the missing or damaged document shall be replaced by Consultant free of charge.
Article 5 Confidentiality
5.1 All data assembled, developed, compiled, reproduced, studied, and prepared in connection with
the work done hereunder and furnished to Consultant by Client shall be considered confidential and shall not be divulged to any person, firm or corporation other than Client or its designated representatives. This Clause shall remain binding on Consultant notwithstanding the termination of the Contract for any reason.
5.2 Within the validity period of Contract, Both parties shall take proper measures to keep the materials or information strictly confidential. The other party shall not disclose or divulge to any third party without prior written consent of one party.
5.3 Either party shall be obliged to keep confidential any secret information of the other party which either party and its personnel may obtain or be accessible to in the course of the performance of Contract. Either party shall not make use of or disclose such secret information obtained from the other party without prior written permission issued by the other party.
英文技术服务合同范本 Contract No.:________________________. Date of Signature:____________________. Place of Signature:____________________. This Contract is made and entered into through friendly negotiation by and between China____________________ (hereinafter referred to as “Client”), as one party, and____________________ (hereinafter referred to as“Consultant”),as the other party, concerning the technical consultancy service of__________, under the following terms and conditions: Article 1 Contents of Technical Consultancy Service 1.1 Whereas Client desires to obtain the technical consultancy service of from Consultant and Consultant has agreed to perform such services. 1.2 The Scope of Technical Services is defined in Appendix 1. 1.3 The Time Schedule for the Services is shown in Appendix 2. 1.4 The Manning Schedule is described in Appendix 3. 1.5 Consultant shall complete the Services within__________months from the Effective Date of this Contract and furnish the final technical service report, including drawings, designing documents, all kinds of standards and photos, within____months. Consultant shall keep aware, free of charge, Client of the latest development of similar projects and any progress made in order to improve the designing of the project.
国际合作框架协议范本(规范版) Model international cooperation framework agreement (norm ative version) 甲方：___________________________ 乙方：___________________________ 签订日期：____ 年 ____ 月 ____ 日 合同编号：XX-2020-01
国际合作框架协议范本(规范版) 前言：本文档根据题材书写内容要求展开，具有实践指导意义，适用于组织或个人。便于学习和使用，本文档下载后内容可按需编辑修改及打印。 甲方： 代表： 地址： 电话： 传真： 乙方： 代表： 地址： 电话： 传真： 甲乙双方本着互利互惠、共同发展的原则，经过友好协商，决定充分利用双方各自的优势，资源互补，开展留学预备课程，特制定本合作框架协议。
一、合作内容 甲乙双方共同开发设计并开办留学预备课程，共同确定培养目标，制定教学计划，安排课程设置。 1、预备班学制：______年。 2、预备班培养目标： （1）提高学生的英语综合能力，并达到可以办理出国留学的英文水平。 （2）加强学生专业知识水平，为学生在国外的专业学习奠定基础。 （3）达到与国外交流学校课程衔接模式的实现。 3、预备班结束后前往国外学习的国家：澳大利亚、英国、新西兰、加拿大等。 4、预备班收费标准：______元人民币（不含国外使馆签证申请费、个人出国材料公证费以及国外学校报名费）。 二、双方权利和义务 1、甲方权利和义务 （1）负责招生工作，包括制定招生计划，招生宣传等。
（2）负责设计教学方案。 （3）负责安排教学相关工作，包括教师招聘、教学场地的安排和教材的选择等。 （4）负责向学生收取学费和签证服务费。 （5）负责学生管理。 （6）承担所有教学成本及教职员工的薪金。 （7）负责组织安排家长和学生就签证文件的准备、出国前签证辅导、及临行辅导等之会议。 2、乙方权利和义务 （1）负责与海外合作院校联络和沟通，并负责接待与招待外方人员。 （2）负责甲方工作人员的业务培训。 （3）辅助甲方设计教学方案，给教学计划及方案提出建议和意见。 （4）帮助甲方聘请外籍教师、英文教师。 （5）帮助学生联络国外合作院校并取得录取信。
第四节 AIA系列合同及CM和IPD合同模式 一、CM模式 （1）AIA合同 1）A系列：业主与施工承包商、CM承包商、供应商，以及总承包商与分包商之间的标准合同文件 2）B系列：业主与建筑师之间的标准合同文件 3）C系列：建筑师与专业咨询人员之间的标准合同文件 4）D系列：建筑师行业内部使用的文件 5）E系列：合同和办公管理中使用的文件 6）F系列：财务管理报表 （2）CM合同的内涵 1）指由业主委托一家CM单位承担项目管理工作，该CM单位以承包单位的身份进行施工管理，并在一定程度上影响工程设计活动，组织快速路径（Fast-track）的生产方式，使工程项目实现有条件的边设计边施工2）CM模式尤其适用于实施周期长、工期要求紧的大型复杂工程 3）与传统总分包模式下施工总承包商对分包合同的管理理不同，CM合同属于管理承包合同 （4）风险型CM施工阶段的工作 （5）风险型CM的合同计价方式（成本加酬金） 1）采用成本加酬金的计价方式，成本部分由业主承担，CM承包商获取约定的酬金 2）CM承包商签订的每一个分包合同均对业主公开，CM承包商不赚取总包与分包合同之间的差价 3）酬金约定通常可选用如下方式： 1.固定酬金 2.按分包合同价的百分比取费 3.按分包合同实际发生工程费用的百分比取费 （6）保证工程最大费用值（GMP）
（7）可以与雇主协商调整GMP的情况（甲方原因） 1）发生设计变更或补充图纸 2）业主要求变更材料、设备的标准、系统、种类、数量和质量 3）业主签约交由CM承包商管理的施工承包商或雇主指定分包商与CM承包商签约的合同价大于GMP中的相应金额等情况 二、IPD模式 1）概念阶段 2）标准设计阶段 3）详细设计阶段 4）执行文件阶段 5）机构审查阶段 6）采购分包阶段 7）施工阶段 8）竣工收尾阶段 （3）报酬激励方面 1）参与各方共同商定项目目标实现的报酬金额 2）若实际成本小于目标成本，则业主应将结余资金按合同约定的比例支付给其他参与方作为激励报酬 3）若项目实际成本超出目标成本，根据合同约定，业主可选择偿付工程的所有成本，包括设计单位和承包商人员的工资，也可选择不再偿付任何单位的人员成本，只支付材料、设备和分包成本 （4）索赔与争端处理 1）在索赔方面，参与各方应放弃任何对其他参与方的索赔（故意违约等情形除外） 2）在争端处理方面，该模式下任何一方提出的争议应提交到由业主、设计单位、承包商等参与方的高层代表和项目中立人所组成的争议处理委员会协商解决，项目中立人由参与各方共同指定
销售合同 SALES CONTRACT 编号：Contract No: 日期: Date: 签约地点：Signed at: 卖方：Sellers: 地址：Address: 邮政编码：Postal Code: 电话：Tel:传真：Fax: 买方：Buyers: 地址：Address: 邮政编码：Postal Code: 电话：Tel:传真：Fax: 兹确认售予买方下列货品，其成交条款如下： The Seller hereby confirms selling the following goods on terms and conditions (3)公差：数量及总值均有_____%的增减,由卖方决定 Tolerance: With _____% more or less both in amount and quantity allowed at the sellers option. (4) 原产地
Country of Origin: (5) 付款方式：30%预付，70%发货前一周付清 Payment terms: 30% deposit, 70% payment within one week before delivery. (6) 交货时间：收到预付款后15天内完成装运。 Time of shipment: Within15 days after deposit received. (7) 贸易方式：FOB Shanghai Terms of Shipment: FOB Shanghai (8) 包装：胶合板木盘外封铁皮 Packing：Plywood drum with steel sheet cover. (9) 保险：由卖方按发票全额110%投保至_____为止的_____险。 Insurance：To be effected by seller for 110% of full invoice value covering _____ up to _____ only. (10) 装运口岸：中国上海港 Port of Loading: Shanghai Port, China (11) 转运：允许 Transshipment: Allowed (12) 分批装运：允许分批装运 Partial Shipment: Allowed (13) 目的口岸： Port of Destination: (14) 唛头：Shipping Marks： (15) 单据：Documents： (16) 品质与数量、重量的异义与索赔：Quality/Quantity Discrepancy and Claim： (17) 逾期发运：如果由于买方原因造成逾期发运，买方承担责任。造成自签订合同之日起超过45天不能发运的，卖方将每日按货物金额的3%收取保管费；如果由于买方原因造成逾期发运超过6个月，卖方有权自行处置定金和货物。如果是卖方原因造成的逾期
NO.: DATE: FAX: FAX: This Contract is made by and between the Buyers and the Sellers, whereby the Buyers agree to buy and the Sellers agree to sell the under mentioned commodity according to the terms and conditions stipulated below: 买方与卖方就以下条款达成协议： 1. COMMODITY: 2. COUNTRY AND MANUFACTURERS: 原产国及造商： 3. PACKING: To be packed in standard airway packing. The Sellers shall be liable for any damage of the commodity and expenses incurred on account of improper packing and for any rust attributable to inadequate or improper protective measures taken by the sellers in regard to the packing. 包装：标准空运包装。如果由于不适当的包装 而导致的货物损坏和由此产生的费用，卖方应对此负完全的责任。 4. SHIPPING MARK: The Sellers shall mark on each package with fadeless paint the package number, gross weight, net weight, measurement and the wordings: "KEEP AWAY FROM MOISTURE" "HANDLE WITH CARE" "THIS SIDE UP" etc. and the shipping mark: 唛头：卖方应用不褪色的颜料在每个箱子外部刷上箱号、 毛重、净重、尺寸，并注明“防潮” “小心轻放” 、“此面向上”等，唛头为 : 5. TIME OF SHIPMENT （装运期）：within days after receipt of L/C 6. P ORT OF SHIP MEN （装运港）： 7. PORT OF DESTINATIO N （目 的港）：CONTRACT THE BUYERS: ADDRESS : TEL: THE SELLERS: ADDRESS: TEL: , CHINA
编号：YB-HT-021964 战略合作协议书范本通用版 The agreement stipulates mutual obligations and rights that must be performed 甲方： 乙方： 签订日期：年月日 精品合同 / Word文档 / 文字可改 编订：Yunbo Design
战略合作协议书范本通用版 甲方：______人民政府 乙方：______大学 在已经来临的知识经济时代，70%以上的信息和科学创新成果均是以英语为载体进行传播的，并且随着互联网技术的发展和中国加入世界贸易组织，英语在人们生活、学习、工作中交流频率也将会越来越高。 为此，______人民政府决定以政府行为强化中小学英语教学，实施英语教育工程，通过培训英语师资、聘请外籍教师和优秀大学生参与中小学英语教学活动等方式，提高______中小学生的英语听说能力，全面促进中小学生英语学科素质的发展，使英语课程成为全区性的优势学科，为建设“文化发达，经济繁荣，服务一流，现代文明”的______注入新的活力，为教育基础厚实的______
增加新的现代文化积淀。 为了实现以上目标，甲方(______人民政府)和乙方(______大学)经过充分酝酿和协商，达成如下协议： 一、甲方为了落实《中共______市______委、______市______人民政府关于加速发展教育事业的决定》《______市______人民政府教育事业发展“十五”计划》中关于“把英语学科建设成为我区的优势学科”的战略目标，诚恳邀请乙方给予甲方全区英语教学、科研、师资培训、聘请外籍教师等方面以多方面的指导和支持。 二、作为广东省属涉外型重点大学的乙方本着服务地方的宗旨，积极响应省委领导加强广东省英语教学工作的指示精神，接受甲方的邀请，并积极发挥乙方外语教学、培训、科研和师资等方面的优势，给予甲方以力所能及的支持。 三、乙方对甲方的支持，主要包括：对______中小学英语教学改革、教学研究提供指导和咨询;分期分批培训______英语教师的口语和听力，建立水平测评系统;创造条件开设委托培养性质的
ICE合同的全称 JCT合同范本情况简介 JCT合同范本情况简介 1. 国际知名工程合同范本 现在国际上具有影响力的合同示范文本主要包括:国际咨询工程师联合会制定的FIDIC系列合同、美国建筑师学会的AIA系列合同文件、英国土木工程师协会的ICE施工合同条件及NEC施工合同条件、英国联合合同委员会制定的JCT合同条件。 1.1(FIDIC 合同范本 FIDIC是国际咨询工程师联合会的简称，是当今世界上最权威的咨询工程师组织。1999 年，FIDIC 正式出版了一系列新的标准合同条件，即《施工合同条件》(新红皮书)、《生产设备和设计-建造合同条件》 (新黄皮书)、《设计-采购-施工/交钥匙合同条件》 (银皮书)、《简明合同格式》(绿皮书)。 1.2(AIA 合同范本 AIA 是美国建筑师学会(The American Institute of Architects)的简称。AIA 出版的系列合同文件在国际工程承包界，特别是在美洲地区具有较高的权威性，应用广泛。AIA出版的合同文本可以按照两种方式来进行分类。第一种方式是按照“系列”(series)，即使用该合同文本的合同双方的关系,共分为五个系列。第二种方式是按照“族”(family)，即该合同文本所适用的工程建设模式,共分为八族。 1.3(ICE 合同范本与 NEC 合同范本 ICE 是英国土木工程师学会(The Institution of Civil Engineers)的简称。CE 在土木工程建设合同方面具有高度的权威性，对 FIDIC 合同条件有重要影响。
NEC最新版是 2005 年 7 月出版的第三版。NEC合同采用了全新的理念编制，其目的是增进合同各方的合作、建立团队精神，明确合同各方的风险分担，减少工程建设中的不确定性，减少索赔以及仲裁、诉讼的可能性。 1.4. JCT合同范本 JCT是英国合同审定联合会(Joint Contract Tribunal)的简称。从JCT合同内容来看，JCT章程对“标准合同”的定义为:“所有相互一致的合同文件组合，这些文本共同被使用，作为运作某一特定项目所必须的文件。”JCT 的工作是制作标准格式的组合，用于各种类型的工程承接。从其历史发展来看，JCT 先后发布了七版 JCT 合同范本。1909 年发布第一版，最新版2005年发布的一系列合同范本，全名为 JCT 2005 Suite，以下简称“JCT2005”。 2. JCT2005 Suite介绍 2.1 内容及格式 JCT 2005 不是一个单一的文本，而是由各种类型的合同构成的一整套文本。其中包括各类合同 12 种，例如小型工程建设合同、标准建造合同、设计建造合同、大型工程施工合同等等，还包括 4 种协议和抵押担保。每类合同又包括主合同、分包合同以及一些其他特 定类型的合同可能使用到的文件。 现在所有 JCT 2005 中包含的合同都采用如下统一的条款编排格式: (1)定义和解释;(2)工程实施;(3)工程监控;(4)支付;(5)变更;(6)伤害和损失保险;(7)转让、第三方权利和抵押担保;(8)终止;(9)争端的解决。 按这种分节的方式编排合同，其中每一节都涉及了建设工程的一个方面。这种按组编排的方式更具有逻辑性，避免了在合同中识别定位各方的义务等工作而来回翻阅合同的麻烦。 2.2. JCT合同范本特点
国际贸易合同协议书样本中英文对照 文件编号TT-00-PPS-GGB-USP-UYY-0089
CONTRACT NO.: DATE: THE BUYERS: ADDRESS : TEL: FAX: THE SELLERS: ADDRESS: TEL: FAX: This Contract is made by and between the Buyers and the Sellers, whereby the Buyers agree to buy and the Sellers agree to sell the under mentioned commodity according to the terms and conditions stipulated below: 买方与卖方就以下条款达成协议： 1. COMMODITY: 2. COUNTRY AND MANUFACTURERS: 原产国及造商： 3. PACKING: To be packed in standard airway packing. The Sellers shall be liable for any damage of the commodity and expenses incurred on account of improper packing and for any rust attributable to inadequate or improper protective measures taken by the sellers in regard to the
编号：_____________ 国际技术咨询服务合同 委托方：___________________________ 咨询方：___________________________ 签订日期：_______年______月______日
中国________________________公司（以下简称委托方）为一方，_____国 __________________________ 公司（以下简称为咨询方）为另一方，双方就 _________________________的技术咨询服务，授权双方代表按下列条款签订本合同。 This Contract is made and entered into through friendly negotiation by and between China_________________________ (hereinafter referred to as “Client”)， as one party， and__________________________ (hereinafter referred to as“Consultant”)，as the other party， concerning the technical consultancy service of________________________， under the following terms and conditions: 第一条合同内容 Article 1 Contents of Technical Consultancy Service 1.1 委托方希望获得咨询方就___________________________提供的技术咨询服务，而咨询方愿意提供此项服务。 Whereas Client desires to obtain the technical consultancy service of from Consultant and Consultant has agreed to perform such services. 1.2 技术咨询服务范围详见本合同附件一。 The Scope of Technical Services is defined in Appendix 1. 1.3 技术咨询服务的进度安排详见本合同附件二。 The Time Schedule for the Services is shown in Appendix 2. 1.4 技术咨询服务的人员安排见本合同附件三。 The Manning Schedule is described in Appendix 3.
JCT 合同范本情况简介 1. 国际知名工程合同范本 现在国际上具有影响力的合同示范文本主要包括：国际咨询工程师联合会制定的 FIDIC 系列合同、美国建筑师学会的 AIA 系列合同文件、英国土木工程师协会的 ICE 施工合同条件 及 NEC 施工合同条件、英国联合合同委员会制定的 JCT 合同条件。 1.1 ．FIDIC 合同范本 FIDIC 是国际咨询工程师联合会的简称，是当今世界上最权威的咨询工程师组织。 1999 年， FIDIC 正式出版了一系列新的标准合同条件，即《施工合同条件》 （ 新红皮书 ） 、《生产 设备和设计 - 建造合同条件》 （ 新黄皮书 ） 、《设计 - 采购 - 施工 / 交钥匙合同条件》 （ 银皮书 ） 、 《简明合同格式》 （绿皮书 ） 。 1.2 ．AIA 合同范本 适用的工程建设模式 , 共分为八族。 1.3 ．ICE 合同范本与 NEC 合同范本 月出版的第三版。 NEC 合同采用了全新的理念编制，其目的是增进合同各方的合作、 2. JCT2005 Suite 介绍 2.1 内容及格式 JCT 2005 不是一个单一的文本，而是由各种类型的合同构成的一整套文本。其中包括 AIA 是美国建筑师学会 (The American Institute of Architects) 的简称。 AIA 出版的系列合同 文件在国际工程承包界，特别是在美洲地区具有较高的权威性，应用广泛。 AIA 出版的合同 文本可以按照两种方式来进行分类。第一种方式是按照“系列” series ) 本的合同双方的关系 , 共分为五个系列。第二种方式是按照“族” family ) ，即使用该合同文 ，即该合同文本 ICE 是英国土木工程师学会（ The Institution of Civil Engineers 对 FIDIC 合同条件有重要影响。 ）的简称。 CE 在土木工程 建设合同方面具有高度的权威性， NEC 最新版是 2005 年 7 建立团 队精神，明确合同各方的风险分担， 减少工程建设中的不确定性， 减少索赔以及仲裁、 诉讼 的可能性。 1.4. JCT 合同范本 JCT 是英国合同审定联合会（ Joint Contract Tribunal ）的简称。从 JCT 合同内容来看， JCT 章程对“标准合同”的定义为： 所有相互一致的合同文件组合，这些文本共同被使用，作 为运作某一特定项目所必须的文件。 ” JCT 的工作是制作标准格式的组合，用于各种类型的 工程承接。从其历史发展来看， JCT 先后发布了七版 JCT 合同范本。 1909 年发布第一版， 最新版 2005 年发布的一系列合同范本，全名为 JCT 2005 Suite ，以下简称“ JCT2005 ”。
合同编号：YT-FS-8920-88 英文版合同范本 Clarify Each Clause Under The Cooperation Framework, And Formulate It According To The Agreement Reached By The Parties Through Consensus, Which Is Legally Binding On The Parties. 互惠互利共同繁荣 Mutual Benefit And Common Prosperity
英文版合同范本 备注：该合同书文本主要阐明合作框架下每个条款，并根据当事人一致协商达成协议，同时也明确各方的权利和义务，对当事人具有法律约束力而制定。文档可根据实际情况进行修改和使用。 contract no: date: the buyer: the seller: the contract, made out, in chinese and english, both version being equally authentic, by and between the seller and the buyer whereby the seller agrees to sell and the buyer agrees to buy the undermentioned goods subject to terms and conditions set forth hereinafter as follows: 1 name of commodity and specification 2 country of origin & manufacturer 3 unit price (packing charges included)
国际买卖合同范本（中英文对照版） 买方The Buyer: 地址Address Tel:Fax: 卖方The Seller: 地址：Address Tel:Fax: 本合同由买卖双方订立，根据本合同规定的条款，买方同意购买，卖方同意出售下述商品：This Contract is made by and between the Buyers and Sellers, whereby the Buyers agree to buy and the Sellers agree to sell the under-mentioned commodity according to the terms and conditions stipulated below: (1)货名及规格Commodity & Specification (2)数量Qty. (3)单价Unit Price (4)总价Total Amount (5)原产公司：COUNTRY OF ORIGIN : (6)装运期限：TIME OF SHIPMENT: (7)装运口岸：PORT OF SHIPMENT： (8)到货目的地：DESTINATION： (9)保险：INSURANCE： 由卖方按合同金额110％投保一切险和战争险 All Risks and War Risk for 110% contract value to be covered by the Seller. (10)运输方式：TERM OF SHIPMENT:空运By air (11)包装：PACKING： 须用坚固的新木箱包装，适合长途空运/陆运，防湿、防潮、防震、防锈、耐粗暴搬运。由于包装不良所发生的损失，由于采用不充分或不妥善的防护措施而造成的任何锈损、破损，卖方应负担由此而产生的一切费用和损失。包装箱内应包含一整套服务操作手册。卖方使用的木质包装应经薰蒸处理，并在木质包装表面标上清晰的IPPC标识。 To be packed in new strong wooden case(s) suitable for long distance air/land transportation and well protected from dampness, moisture, shock, rust and rough handling. The Sellers shall be liable for any damage to the goods on account of improper packing and for any rust damage and break damage attributable to inadequate or improper protective measures taken by the Sellers, and in such case or cases any and all losses and / or expenses incurred in consequence thereof shall be borne by the Sellers. One full set of service and operation manuals concerned shall be enclosed in the case(s). The wood packaging the Seller used shall be fumigated and marked with “IPPC”on the surface of wood packaging. (12)唛头：SHIPPING MARK: 卖方应在每件包装上，用不褪色油墨清楚地标刷件号、尺码、毛重、净重、“此端向上”、“小心轻放”、“切勿受潮”等字样，并刷有下列唛头:
英文技术服务合同模板 篇一：国际技术咨询服务合同 （中英文 ）】 国际技术咨询服务合同 （中英文） technical consultancy service contract 合 同 号： contract no ___ 公司（以下简称委托方）为一方， ___________ 公司（以下简称为咨询方）为另一方，双方就 的技术咨询服务，授权双方代表按下列条款签订本 合同。 this contract is made and entered into through friendly negotiation by and between china ___________________________________________ (hereinafter referred to as “ client ” ), as one party, and ________________________ (hereinafter referred to as “ consultant ”),as the other party, concerning the technical consultancy service of __________ , under the following terms and conditions: 第一条 合同内容 article 1 contents of technical consultancy service whereas client desires to obtain the technical consultancy service of from consultant and consultant has agreed to perform such services. 1.2 技术咨询服务范围详见本合同附件一。 签订日期： date of signature: 签订地点： place of signature: 中国 1.1 委托方希望获得咨询方就 方愿意提供此项服务。 提供的技术咨询服务，而咨询
中英文项目合作协议书范本 " Project cooperation agreement": 甲方：_________乙方：_________经甲、乙双方共同协商，本着互惠互利、共同发展 Party A: _ _ _ _ _ _ _ _ _ B: _ _ _ _ _ _ _ _ _ by a, B both negotiation, mutual benefit, common development 《项目合作协议范本》正文开始>>甲方：_________ " Project cooperation agreement" start of text >> A: _ _ _ _ _ _ _ _ _ 乙方：_________ B: _ _ _ _ _ _ _ _ _ 经甲、乙双方共同协商，本着互惠互利、共同发展，使中国秘书尽早走向职业化，达成如下合作协议： The A, B both negotiation, mutual benefit, common development, make Chinese secretary as early as possible to occupation, reached the following agreement: 一、甲方授权乙方为_________省_________市_________合作基地。同时为了维护双方的合法权益，乙方一次性向甲方交纳履约保证金_________元。 One, Party A authorizes Party B to _ _ _ _ _ _ _ _ _ province _ _ _ _ _ _ _ _ _ city _ _ _ _ _ _ _ _ _ cooperation base. At the same time in order to maintain the lawful rights and interests of both parties, Party B shall pay to party a one-off performance bond _ _ _ _ _ _ _ _ _ element. 二、甲方职责： In two, a duty: 1.向乙方提供合作范围内的《授权书》; 1 Party A shall provide to Party B within the scope of cooperation" authorization"; 2.向乙方颁发_________合作基地的铜牌; 2 Party B _ _ issued _ _ _ _ _ _ _ cooperation base bronze; 3.负责协助乙方办理_________证书; 3 assisting Party B with the _ _ _ _ _ _ _ _ _ certificate; 4.向乙方提供甲方的办学许可证、收费许可证复印件等有关证明文件; 4 Party A shall provide to Party B Party school license, charging a copy of the license and other relevant documents; 5.负责学生入学资格的审核、面试及录取工作; 5 is responsible for student admission qualification examination, interview and enrollment; 6.负责乙方教学大纲的制定及教学质量的监督和检查; 6 be responsible for working out a syllabus and teaching quality supervision and inspection; 7.学生在甲方学习期满成绩合格者，由甲方负责毕业证书的发放; 7 students in a learning period achievement eligible, by Party A is responsible for the issuance of a certificate of graduation; 8.精品秘书班、现代高等秘书班的学生学习期满成绩合格者，甲方负责安排就业。 8 fine secretary class, modern advanced secretarial class student learning expires achievement eligible, Party A is responsible for arranging employment. 三、乙方职责： Three, B: 1.负责在当地办理合作办学的有关手续; 1 is responsible for the local management cooperation in running schools of the relevant procedures;
aia建筑合同b系列 篇一：美国AIA系列合同条件分为A、B、C、D、F、G 系列,其中建筑师行业所 一、整体解读 试卷紧扣教材和考试说明，从考生熟悉的基础知识入手，多角度、多层次地考查了学生的数学理性思维能力及对数学本质的理解能力，立足基础，先易后难，难易适中，强调应用，不偏不怪，达到了“考基础、考能力、考素质”的目标。试卷所涉及的知识内容都在考试大纲的范围内，几乎覆盖了高中所学知识的全部重要内容，体现了“重点知识重点考查”的原则。 1．回归教材，注重基础 试卷遵循了考查基础知识为主体的原则，尤其是考试说明中的大部分知识点均有涉及，其中应用题与抗战胜利70周年为背景，把爱国主义教育渗透到试题当中，使学生感受到了数学的育才价值，所有这些题目的设计都回归教材和中学教学实际，操作性强。 2．适当设置题目难度与区分度 选择题第12题和填空题第16题以及解答题的第21题，都是综合性问题，难度较大，学生不仅要有较强的分析问题和解决问题的能力，以及扎实深厚的数学基本功，而且还要
掌握必须的数学思想与方法，否则在有限的时间内，很难完成。 3．布局合理，考查全面，着重数学方法和数学思想的考察 在选择题，填空题，解答题和三选一问题中，试卷均对高中数学中的重点内容进行了反复考查。包括函数，三角函数，数列、立体几何、概率统计、解析几何、导数等几大版块问题。这些问题都是以知识为载体，立意于能力，让数学思想方法和数学思维方式贯穿于整个试题的解答过程之中。 篇二：美国建筑师学会(AIA)的合同条件体系,分为A、B、 C、D、F、G系列 一、整体解读 试卷紧扣教材和考试说明，从考生熟悉的基础知识入手，多角度、多层次地考查了学生的数学理性思维能力及对数学本质的理解能力，立足基础，先易后难，难易适中，强调应用，不偏不怪，达到了“考基础、考能力、考素质”的目标。试卷所涉及的知识内容都在考试大纲的范围内，几乎覆盖了高中所学知识的全部重要内容，体现了“重点知识重点考查”的原则。 1．回归教材，注重基础 试卷遵循了考查基础知识为主体的原则，尤其是考试说明中的大部分知识点均有涉及，其中应用题与抗战胜利70
合同 CONTRACT 日期：合同号码： Date: Contract No.: 买方：(The Buyers) 卖方：(The Sellers) 兹经买卖双方同意按照以下条款由买方购进，卖方售出以下商品： This contract is made by and between the Buyers and the Sellers; whereby the Buyers agree to buy and the Sellers agree to sell the under-mentioned goods subject to the terms and conditions as stipulated hereinafter: (1) 商品名称: Name of Commodity： (2) 数量： Quantity: (3) 单价： Unit price: (4) 总值： Total Value: (5) 包装： Packing: (6) 生产国别： Country of Origin : (7) 支付条款： Terms of Payment: (8) 保险： Insurance: (9) 装运期限： Time of Shipment: (10) 起运港： Port of Lading:
(11) 目的港： Port of Destination: (12)索赔：在货到目的口岸45天内如发现货物品质，规格和数量与合同不符，除属保险公司或船方责任外，买方有权凭中国商检出具的检验证书或有关文件向卖方索赔换货或赔款。 Claims: Within 45 days after the arrival of the goods at the destination, should the quality, Specifications or quantity be found not in conformity with the stipulations of the contract except those claims for which the insurance company or the owners of the vessel are liable. The Buyers shall, have the right on the strength of the inspection certificate issued by the C.C.I.C and the relative documents to claim for compensation to the Sellers. (13)不可抗力：由于人力不可抗力的原由，发生在制造、装载或运输的过程中导致卖方延期交货或不能交货者，卖方可免除责任。在不可抗力发生后，卖方须立即电告买方及在14天内以空邮方式向买方提供事故发生的证明文件，在上述情况下，卖方仍须负责采取措施尽快发货。 Force Majeure: The sellers shall not be held responsible for the delay in shipment or non-deli-very of the goods due to Force Majeure, which might occur during the process of manufacturing or in the course of loading or transit. The sellers shall advise the Buyers immediately of the occurrence mentioned above the within fourteen days there after. The Sellers shall send by airmail to the Buyers for their acceptance certificate of the accident. Under such circumstances the Sellers, however, are still under the obligation to take all necessary measures to hasten the delivery of the goods. (14）仲裁：凡有关执行合同所发生的一切争议应通过友好协商解决，如协商不能解决，则将分歧提交中国国际贸易促进委员会按有关仲裁程序进行仲裁，仲裁将是终局的，双方均受其约束，仲裁费用由败诉方承担。 Arbitration: All disputes in connection with the execution of this Contract shall be settled friendly through negotiation. In case no settlement can be reached, the case then may be submitted for arbitration to the Arbitration Commission of the China Council for the Promotion of International Trade in accordance with the Provisional Rules of Procedure promulgated by the said Arbitration Commission. The Arbitration committee shall be final and binding upon both parties. And the Arbitration fee shall be borne by the losing parties.