当前位置:
文档之家› Lesson23ICDesignFlow电子技术专业英语教程
Lesson23ICDesignFlow电子技术专业英语教程
•2020/5/25
•《电子技术专业英语教程》
•Backgrounds
• Terminology
– Design Rule Check – Layout versus Schematic – functional verification – parameter simulation – layout Parasitic Extraction
•2020/5/25
•《电子技术专业英语教程》
•Introduction
• the Front-end Design • the back-end design Flow • The Typical Digital IC design flow
•2020/5/25
•《电子技术专业英语教程》
•the Front-end Design
• To place or settle in a secure position or condition; install 使被安排好:以安全的位置或状态安置或安放;放置
•2020/5/25
•《电子技术专业英语教程》
•Establish in dictionary
• To make firm or secure. 确立或使安全
•2020/5/25
•《电子技术专业英语教程》
•Indicator in text
• Making sure SPEC and knowing well the chip’s performance indicators. For example, electrical characteristics and typical performance characteristics;
•2020/5/25
•《电子技术专业英语教程》
•Establish in text
• Establishing own Library and definiting the Technology File and Display File;
• 建立自己的库,定义工艺文件和显示文件。
•2020/5/25
设计规则检查 版图和电路图对照 功能验证 参数仿真 版图参数提取
•2020/5/25
•《电子技术专业英语教程》
•Design Rule Check
• 在版图设计过程中,设计规则是由电路性能要求和生 产工艺水平决定的,而最终选取取决于工艺水平。版 图设计一旦完成,必须进行设计规则检查以确保版图 设计的正确性。不适当的设计规则或违反规则的版图 设计将成为电路生产的隐患,因此必须在掩膜板产生 之前检查出并改正。
• The castings made by founding. 铸件:铸造出来的物件
•2020/5/25
•《电子技术专业英语教程》
•Foundry in text
• Knowing well the processing of Foundry, understand of the single MOSFET's I-V Curve and reading the simulation files used in .lib;
• 熟悉代工厂的工艺,了解单管的电流-电压特性曲线, 阅读仿真所用的库文件;
•2020/5/25
•《电子技术专业英语教程》
Structure
•2020/5/25
•《电子技术专业英语教程》
– indicator, establish
– Structure
• Reading/writing techniques
•2020/5/25
•《电子技术专业英语教程》
Vocabulary
•2020/5/25
•《电子技术专业英语教程》
•Indicator in dictionary
• One that indicates, especially: 指示者:尤指起指示作用的人
• 确定描述,明确芯片所要达到的性能指标,即电路的 特性和典型的性能参数;
•2020/5/25
•《电子技术专业英语教程》
•Establish in dictionary
• To set up; found.See 创建:建立;
• To bring about; generate: 带来,招致:带来;引起
Lesson23ICDesignFlo w电子技术专业英语教
程
2020年5月25日星期一
Lesson 21 IC Design Flow
• Backgrounds • Text tour • Language in use
– Vocabulary – Structure – Reading/writing techn教程》
•the back-end design Flow
•2020/5/25
•《电子技术专业英语教程》
•The Typical Digital IC design flow
•2020/5/25
•《电子技术专业英语教程》
•Language in use
• Vocabulary
•* •2020/5/25
•4 •《电子技术专业英语教程》
•Text tour
• Outline
– Introduction – the Front-end Design – the back-end design Flow – The Typical Digital IC design flow
•《电子技术专业英语教程》
•Foundry in dictionary
• An establishment in which metal is melted and poured into molds. 铸造车间:熔化金属并将之注入模子的地方
• The skill or operation of founding. 铸造术,铸造:铸造,铸造的技术
• A pointer or an index. 指示:箭头或索引
• An instrument used to monitor the operation or condition of an engine, a furnace, an electrical network, a reservoir, or another physical system; a meter or gauge. 指示器,记录器:监控发动机、熔炉、电网、水库或 其它系统运作状况的仪器;指示板或仪表盘
• To cause to be recognized and accepted: 使…被接受:使…得到承认和使…被接受
• To introduce and put (a law, for example) into force. 介绍和实施(如,法律)
• To prove the validity or truth of: 担保:确保…合法性或安全性