MPas™ Packer Specifications
Size : 4-1/2” Maximum Packer O.D. : 5.625” Minimum ID : 3.8” Setting Mechanism: Hydrostatic / Hydraulic Tested w/ 4,100 psi Hydrostatic + 3,000 psi Hydraulic Setting Pressure Cylinder Collapse Rating: 7,500 psi (80ksi MYS) Mandrel Burst Rating: 8,440 psi (80ksi MYS) Mandrel Tensile Strength: 289,000 # (80ksi MYS) Setting Tool Required: Workstring Cup Tool Maximum Ovality Tested (to date): 6” x 7-1/2”
Body
Elastomer Packing Element Core
Kevlar Reinforcement
Braided Steel Structural Layer
Deformable Back Up Rings
Outer Elastomer Cover
MPas™ Open Hole Packer Sequence
Pull Above Liner Top, Spot Spacers, Displace Casing w/ Brine
Example Installation Sequence
Setting l
Multi-Zone Perforated Pipe Case History
low-permeability silt stringers to enable future shut-off of water as it ingresses. ~4.5 hours from TD to set and individually test each of packer.
MPas™ Open Hole Packer Sequence
ShiftRinuSgne-tBInPaolPasonistciieotinSonleeve (Initiating Setting)
MPas™ Packer Specifications
Size : 5-1/2” Maximum Packer O.D. : 8.03” / 8.075” Minimum ID : 4.592” – 4.802” Setting Mechanism: Hydrostatic Cylinder Collapse Rating: 10,700 psi (80ksi MYS) Mandrel Burst Rating: 8,400 psi (80ksi MYS) Mandrel Tensile Strength: 261,000 # (80ksi MYS) Setting Tool Required: Workstring Shifting Tool Maximum Ovality Tested (to date): 8-1/2” x 12”
Location : Timor Sea, Australia Operator : ConocoPhillips Field : Bayu Undan Date : 1st well May 2004 # Wells : 3 # MPas Packers : 26 (10, 8, 8) Max Deviation : 62 Degrees Max Depth : 10,352 ft TVD Max Temperature : 270 Deg F Job Description : Isolation for water shut off One-Trip System with SelectSet Collet tool run as an integral part of the inner string. Packers set in
Run-In Position Shifting Balance Sleeve (Initiating
Setting) Set Position
MPas™ Open Hole Packer Sequence
SRheutifnPt-inIongsPiBtiooasnliatniocne Sleeve (Initiating Setting)
Example Installation Sequence
TD Hole, Condition Mud, POOH
Run Liner Assy to Depth, Correlate, Hang, Circulate Hole Volume w/ DIF
Set Liner Top Packer
Pull up Inner String, Set MPas Packers
Baker Oil Tools
贝克休斯的关于裸 眼封隔器的材料
© 2000 Baker Hughes Incorporated All rights reserved.
MPas™ New Era Open Hole Packers
MPas™ New Era Open Hole Packer
MPas™ Packer Design
MPas™ Packer Specifications
Size : 6-5/8” Maximum Packer O.D. : 9.125” Minimum ID : 5.696” Setting Mechanism: Hydrostatic Cylinder Collapse Rating: 5,000 psi (80ksi MYS) Mandrel Burst Rating: 5,700 psi (80ksi MYS) Mandrel Tensile Strength: 575,000 # (80ksi MYS) Setting Tool Required: Workstring Shifting Tool Maximum Ovality Tested (to date): 9-1/2” x 11”