MPas Installations Details
Max Temperature Max Dogleg Severity Max Measured Depth Max Total Vertical Depth Max Deviation Max Deviation at Packer Max Mud Weight
MPas™ New Era Open Hole Packer
© 2005 Baker Hughes Incorporated All rights reserved.
MPas™ Packer Design
Body
Elastomer Packing Element Core
Kevlar Reinforcement
The oil reactive section utilizes oleophillic polymers that absorb hydrocarbons into the matrix. This process is a physical uptake of the hydrocarbon which swells, lubricates and decreases the mechanical strength of the polymer chain as it expands.
© 2005 Baker Hughes Incorporated All rights reserved.
ShiftRinuSgne-tBInPaolPasonistciieotinSonleeve (Initiating Setting)
MPas™ Packer Specifications
Size : 5-1/2” Maximum Packer O.D. : 8.03” / 8.075” Minimum ID : 4.592” – 4.802” Setting Mechanism: Hydrostatic Cylinder Collapse Rating: 10,700 psi (80ksi MYS) Mandrel Burst Rating: 8,400 psi (80ksi MYS) Mandrel Tensile Strength: 261,000 # (80ksi MYS) Setting Tool Required: Workstring Shifting Tool Maximum Ovality Tested (to date): 8-1/2” x 12”
Braided Steel Structural Layer
© 2005 Baker Hughes Incorporated All rights reserved.
Deformable Back Up Rings
Outer Elastomer Cover
MPas™ Open Hole Packer Sequence
© 2005 Baker Hughes Incorporated All rights reserved.
MPas™ Packer Specifications
Size : 4-1/2” Maximum Packer O.D. : 5.625” Minimum ID : 3.8” Setting Mechanism: Hydrostatic / Hydraulic Tested w/ 4,100 psi Hydrostatic + 3,000 psi Hydraulic Setting Pressure Cylinder Collapse Rating: 7,500 psi (80ksi MYS) Mandrel Burst Rating: 8,440 psi (80ksi MYS) Mandrel Tensile Strength: 289,000 # (80ksi MYS) Setting Tool Required: Workstring Cup Tool Maximum Ovality Tested (to date): 6” x 7-1/2”
© 2005 Baker Hughes Incorporated All rights reserved.
Multilateral Case History
Location : Eastern Province, Saudi Arabia
Operator : ARAMCO
Field : GHZL-9
Baker Oil Tห้องสมุดไป่ตู้ols
Openhole Packer
© 2000 Baker Hughes Incorporated All rights reserved.
MPas™ New Era Open Hole Packers
© 2005 Baker Hughes Incorporated All rights reserved.
Run Liner Assy to Depth, Correlate, Hang, Circulate Hole Volume w/ DIF
Set Liner Top Packer
Pull up Inner String, Set MPas Packers
Pull Above Liner Top, Spot Spacers, Displace Casing w/ Brine
© 2005 Baker Hughes Incorporated All rights reserved.
MPas™ Packer Specifications
Size : 6-5/8” Maximum Packer O.D. : 9.125” Minimum ID : 5.696” Setting Mechanism: Hydrostatic Cylinder Collapse Rating: 5,000 psi (80ksi MYS) Mandrel Burst Rating: 5,700 psi (80ksi MYS) Mandrel Tensile Strength: 575,000 # (80ksi MYS) Setting Tool Required: Workstring Shifting Tool Maximum Ovality Tested (to date): 9-1/2” x 11”
Equaliser Screen Case History
Location : Saudi Arabia Operator : ARAMCO Field : Zuluf Main Sand Date : December 2002 # Wells : 1 # MPas Packers : 4 Max Deviation : 90 Degrees Max Depth : 6,500 ft TVD Max Temperature : 200 Deg F Job Description :
One-Trip System with MAIC tool run as an integral part of the inner string. Packers used to increase production capabilities of equaliser screen. PLT run and isolation proven.
SRheutifnPt-inIongsPiBtoioasnliatniocne Sleeve (Initiating Setting)
© 2005 Baker Hughes Incorporated All rights reserved.
MPas™ Open Hole Packer Sequence
270ºF 8º/100ft 20,682 ft 13,500 ft 93.1º 89.5º 10.6ppg
© 2005 Baker Hughes Incorporated All rights reserved.
REPacker
The water reactive section consists of water absorbing particles incorporated in a field proven Nitrile-based polymer. These particles swell via absorbing water which in turn expands the rubber without being physically absorbed into the rubber matrix which can adversely effect properties
Multi-Zone Perforated Pipe Case History
Location : Timor Sea, Australia Operator : ConocoPhillips Field : Bayu Undan Date : 1st well May 2004 # Wells : 3 # MPas Packers : 26 (10, 8, 8) Max Deviation : 62 Degrees Max Depth : 10,352 ft TVD Max Temperature : 270 Deg F Job Description : Isolation for water shut off One-Trip System with SelectSet Collet tool run as an integral part of the inner string. Packers set in
Deepest ML Junction
deployment depth to date of 14,082’ ft. First FBIV w/ Hook
Hanger and LEN systems. First MPas Instillation in ML Well.
© 2005 Baker Hughes Incorporated All rights reserved.