协议编号：LX-FS-A82668 翻译服务合同英文标准范本
After Negotiation On A Certain Issue, An Agreement Is Reached And A Clause With Economic Relationship Is Concluded, So As To Protect Their Respective Legitimate Rights And Interests.
编写：_________________________
审批：_________________________
时间：________年_____月_____日
A4打印/ 新修订/ 完整/ 内容可编辑
翻译服务合同英文标准范本
使用说明：本协议资料适用于经过谈判或共同协商的某个问题，在取得一致意见后并订立的具有经济或其它关系的契约条款，最终实现保障各自的合法权益的结果。资料内容可按真实状况进行条款调整，套用时请仔细阅读。
翻译服务合同英文模板一
Technical Cooperation Agreement
甲方：XX油脂化学有限公司
Party A: XX Grease Chemical Co. , Ltd.
地址：XX高新技术工业园
Address: XXHigh-tech Industrial Park
法定代表人：XXX
Legal Representative: XXX
乙方：
Party B:
地址：
Address:
本协议合作双方就组建技术研发团队事项，经过平等协商，在真实、充分地表达各自意愿互惠互利的基础上，根据《中华人民共和国合同法》的规定，达成如下协议，并由合作各方共同恪守。
This Agreement, concerning the setting up of a technical research and development team, is made according to the Contract Law of PRC regulations and entered into through equal negotiation by both Parties as the free and full expression of their own wishes to mutual benefits, and to this end both Parties shall abide by this Agreement as following.
第一条、甲方同意雇用乙方为新产品研发技术顾问。乙方同意为甲方提供技术
顾问服务。
Article 1: Party A hereby agrees to employ party B as the technical consultant for the new product research and development. Party B hereby agrees to offer technical consultation service to Part A.
第二条、甲方同意每月支付乙方的研究费用，包括：薪资、办公费、检测费、
差旅费以及其他相关费用。
Article 2: Party A hereby agrees to pay Party B for the research each month, including salaries, administrative expenses, detection cost, traveling expenses and other cost associated.
第三条、乙方有责任为甲方提供相关国内外技
术及市场信息，并及时答复甲方
技术上所遇到的问题。
Article 3：Party B is responsible to provide relevant technical and market information home and abroad and is ready to answer any technical problem frequently asked by Party A.
第四条、乙方有义务向甲方提供有关个人简历和相关证明材料，甲方要尊重乙
方个人隐私，有义务妥善保管相关材料。
Article 4: Party B shall has the obligation to provide Party A with any relevant personal resume and reference documents as necessary. Party A shall respect the personal privacy of Party B and has the obligation to properly keep those materials.
第五条、乙方同意所研发的产品所有知识产权归甲方所有，乙方不得将相关技
术信息泄露给任何第三方，否则需要承担一切法律后果。
Article 5: Party B hereby agrees that the intellectual property of any product as researched and developed herein shall be owned by Party A. Party B shall not be allowed to disclose any technical information concerned to the third party, or it shall take all the legal consequences.
第六条、甲乙双方同意通过紧密合作达到共同目标;每年增加一到三个项目;
每年申请一到三个发明专利;每年完成一到两个能够通过专家认证的
新产品;每年至少向市场推广两个产品。
Article 6: Both Parties agree to achieve their common goals by their close cooperation. It is planned to add one to three projects each year and to apply for one to three patents for inventions each year, to make one to two new products certified by experts each year, and to promote at least two products to the market each year.
第七条、此协议甲乙双方各执一份，没有在协议中提到的事项双方需协商解决。Article 7: This Agreement is held by both Parties, one for each respectively. Any issue not mentioned in this Agreement shall be settled by both Parties through negotiation.
此协议从签字当日起生效。
This Agreement shall take effect from the date of signature.
甲方：乙方：
Party A Party B:
签字：签字：
Signature: Signature:
日期：日期：
Date Date:
翻译服务合同英文模板二
a New York Corporation
TRANSLATION SERVICES AGREEMENT
Date: 30 June, 20xx
Name of Client (“Client”): YYYY
Address of Client:
Client wishes to engage Company to perform certain translation services upon the terms and conditions of this Agreement. In consideration of this and the following mutual promises and covenants, and for other good and valuable consideration, the parties agree as follows:
1. Client wishes Company to perform and Company agrees to perform the Translation Services described in Exhibit A. All work performed by the Company shall be in accordance with industry standards.
2. Client shall pay Company for the Translation Services provided to Client in accordance with the pricing and the terms set
forth in Exhibit A. In addition to these fees, Client shall reimburse Company for necessary out-of-pocket expenses incurred by Company that are not a normal part of routine translation procedures, such as overnight delivery requested by Client, long distance telephone and facsimile expenses to clarify document ambiguity, non-text document formatting, indexing of documents, bates and/or control numbering, large–scale photocopying, etc.
3. The parties acknowledge that due to inherent differences in language, words, terms and phrases specific to a culture, region, and/or country, it is not always possible to translate exactly from one language to another.
Accordingly, while Company will make every effort to ensure an accurate translation, it makes no warranties, express or implied, with respect to the Translation Services.
4. In no event shall Company be liable to Client for any indirect, special or consequential damages or lost profits arising out of or related to this Translation Services Agreement or performance or breach hereof, even if Company has been advised of the possibility thereof. Company’s liability to Client under this Agreement, if any, shall not exceed the total of the fees paid to Company hereunder. Nothing in this Agreement will limit or exclude any liability for fraudulent misrepresentation.
5. This Agreement shall continue in full force and effect until terminated by either party. This Agreement may not be assigned by either party without the consent of the other. Any waiver by either party of a breach of any provision of this Agreement shall not operate, or be construed, as a waiver of any subsequent breach. No change, modification or waiver of any term
of this Agreement shall be valid unless it is in writing signed by both XXXX and Client. This agreement constitutes the entire Agreement between the parties with respect to the subject matter contained herein and supersedes all prior agreements of understanding between
the parties. This Agreement shall be governed by the laws of the State of New York and Client agrees to submit to the exclusive jurisdiction of the Courts of the State of New York.
For XXXX Translations, Inc. For YYYY:
a New York corporation:
_______ ______ xxxxx Smith Signature
Vice President
______ Dated: 30 June, 20xx Printed Name
签约日期：
Title:
Dated:
翻译服务合同英文模板三
Party A:
Party B:
Since Party A entrusts Party B to translate the relevant written document, two parties agree to sign the following translation agreement under each other’s friendly consultation:
1. Party A entrusts Party B to translate the relevant written document with a total characters of
____(blanks not included), and Party B shall translate the document into_____ language in accordance with Party A’s demand.
2. When Party B confirms to receive the relevant document, Party B shall complete and deliver the
corresponding translated document to
Party A on_____(month)_____(day).
3. The translation fee shall be calculated in accordance with Chinese
characters (blanks not included); before Party B begins to carry out the relevant translation, Party A shall pay an advance payment RMB____ to Party B. When Party B delivers the entire translated document to Party A, Party A must pay off the entire remaining translation fee RMB_____(deducting the advance payment from the total translation fee). If any deferred payment occurs by Party A, Party A shall compensate the corresponding losses, and pay Party B with a late payment charge of 5% of the total translation fee per day.
4. Party B shall complete the translation work in time, and guarantee that the quality of the
translation. If Party A has any objection to the quality of translated document, Party A shall notice Party B in written form. Party B shall be responsible for correcting mistakes for free in the document translated within seven days after Party A’s receiving the translated document.
5. Party B shall keep confidentiality of any content of the documents provided by Party A and can
not disclose to any third party. Party B shall not dispose the original document and the
corresponding translated document in any form without authority of Party A.
6. Party B has right not to translate the document with unclear original test and blurred writing. If
it is necessary, Party A and Party B shall jointly consult the relevant special nouns.
7. Since the date of signing this agreement, both parties shall not terminate this agreement freely.
If a party causes the other party suffer losses, the party violating the agreement shall compensate the agreement value in double as a default penalty, and Party A and Party B shall reserve their respective litigious rights.
8. If there is any item not being referred in this agreement, Party A and Party B shall jointly resolve the corresponding through consultation.
9. This agreement shall be valid after both parties’signing or sealing in this agreement.
10. Any fax copy of this agreement shall be valid and effective.
This agreement is written in duplicates, one for each party.
Party A: Party B:
Manager: Manager:
Date: / / 20xx Date: / / 20xx
请在该处输入组织/单位名称
Please Enter The Name Of Organization / Organization Here
翻译服务合同英文(合同示范 文本) Contracts concluded in accordance with the law have legal effect and regulate the behavior of the parties to the contract ( 合同范本 ) 甲方：______________________ 乙方：______________________ 日期：_______年_____月_____日 编号：MZ-HT-013522
翻译服务合同英文(合同示范文本) 翻译服务合同英文模板一 Technical Cooperation Agreement 甲方：XX油脂化学有限公司 Party A: XX Grease Chemical Co. , Ltd. 地址： XX高新技术工业园 Address: XXHigh-tech Industrial Park 法定代表人：XXX Legal Representative: XXX 乙方： Party B: 地址： Address:
本协议合作双方就组建技术研发团队事项，经过平等协商，在真实、充分地表达各自意愿互惠互利的基础上，根据《中华人民共和国合同法》的规定，达成如下协议，并由合作各方共同恪守。 This Agreement, concerning the setting up of a technical research and development team, is made according to the Contract Law of PRC regulations and entered into through equal negotiation by both Parties as the free and full expression of their own wishes to mutual benefits, and to this end both Parties shall abide by this Agreement as following. 第一条、甲方同意雇用乙方为新产品研发技术顾问。乙方同意为甲方提供技术 顾问服务。 Article 1: Party A hereby agrees to employ party B as the technical consultant for the new product research and development. Party B hereby agrees to offer technical consultation service to Part A.
雇佣合同范本 Party A:_____________ Party B:_____________ I. Party A wishes to engage the service of party B___________as______________. The two Parties, in a spirit of friendly cooperation, agree to sign this contract and pledge to fulfill conscientiously all the obligations stipulated in it. II. The period of service will be from the _______day of ________ ,_____to the ________day of ________ . III. The duties of Party B (see attached pages) IV. Party Bs monthly salary will be Yuan RMB (About USD), the pay day is every month_______ .If not a full month, the salary will be will be prorated (days times salary/30). V. Party As Obligations 1．Party A shall introduce to Party B the laws, decrees and relevant regulations enacted by the Chinese government, the Party As work system and regulations concerning administration of foreign teachers. 2. Party A shall conduct direction, supervision and evaluation of Party Bs work. 3. Party A shall Provide Party B with necessary working and living conditions. 4. Party A shall provide co-workers for the first week if necessary. VI. Party Bs obligations 1. Party B shall observe the laws, decrees and relevant regulations enacted by the Chinese government and shall not interfere in Chinas internal politics affairs. 2. Party B shall observe Party As work system and regulations concerning administration of foreign teachers and shall accept Party As agreement, direction, supervision and evaluation in regard to his/her work. Without Party As consent, Party B shall not render service elsewhere or hold concurrently any post unrelated to the work agreed on with Party A. 3. Party B shall complete the tasks agreed on schedule and guarantee the quality of work. 4. Party B shall respect Chinas religious policy, and shall not conduct religious activities incompatible with the status of a teacher. 5. Party B shall respect the Chinese peoples moral standards and customs. V. Revision, Cancellation and Termination of the Contract 1. Both Parties should abide by the contract and should refrain from revising, canceling, or terminating the contract without mutual consent. 2. The contract can be revised, cancelled, or terminated with mutual consent. Before both parties have reached an agreement, the contract should be strictly observed. 3. Party A has the right to cancel the contract with written notice to Party B under the following conditions. (1) Party B does not fulfill the contract or does not fulfill the contract obligations according to the terms stipulated, and has failed to amend after Party A has pointed it out. (2) According to the doctors diagnosis, Party B cannot resume normal work after 30 days sick leave. 4. Party B has the right to cancel the contract with a written notice to party A under the following conditions:
英文技术服务合同范本 Contract No.:________________________. Date of Signature:____________________. Place of Signature:____________________. This Contract is made and entered into through friendly negotiation by and between China____________________ (hereinafter referred to as “Client”), as one party, and____________________ (hereinafter referred to as“Consultant”),as the other party, concerning the technical consultancy service of__________, under the following terms and conditions: Article 1 Contents of Technical Consultancy Service 1.1 Whereas Client desires to obtain the technical consultancy service of from Consultant and Consultant has agreed to perform such services. 1.2 The Scope of Technical Services is defined in Appendix 1. 1.3 The Time Schedule for the Services is shown in Appendix 2. 1.4 The Manning Schedule is described in Appendix 3. 1.5 Consultant shall complete the Services within__________months from the Effective Date of this Contract and furnish the final technical service report, including drawings, designing documents, all kinds of standards and photos, within____months. Consultant shall keep aware, free of charge, Client of the latest development of similar projects and any progress made in order to improve the designing of the project.
国际技术咨询服务合同（中英文） Technical Consultancy Service Contract 合同号：Contract No________________ 签订日期：Date of Signature:________________ 签订地点：Place of Signature:________________ 中国____________公司（以下简称委托方）为一方，______国______________ 公 司（以下简称为咨询方）为另一方，双方就_____________的技术咨询服务，授权双方代表按下列条款签订本合同。 This Contract is made and entered into through friendly negotiation by and between China____________________ (hereina fter referred to as “Client”), as one party, and____________________ (hereinafter referred to as“Consultant”),as the other party, concerning the technical consultancy service of__________, under the following terms and conditions: 第一条合同内容 Article 1 Contents of Technical Consultancy Service 1.1 委托方希望获得咨询方就_____提供的技术咨询服务，而咨询方愿意提供此项服务。 Whereas Client desires to obtain the technical consultancy service of from Consultant and Consultant has agreed to perform such services. 1.2 技术咨询服务范围详见本合同附件一。 The Scope of Technical Services is defined in Appendix 1. 1.3 技术咨询服务的进度安排详见本合同附件二。 The Time Schedule for the Services is shown in Appendix 2. 1.4 技术咨询服务的人员安排见本合同附件三。 The Manning Schedule is described in Appendix 3. 1.5 技术咨询服务自合同生效之日起_____个月内完成，将在_____个月内提交最终技术咨询报告，包括图纸、设计资料、各类规范和图片等。咨询方应免费通报委托方类似工程的最近发展和任何进展，以便委托方能改进该工程的设计。 Consultant shall complete the Services within__________months from the Effective Date of this Contract and furnish the final technical service report, including drawings, designing documents, all kinds of standards and photos, within____months. Consultant shall keep aware, free of charge, Client of the latest development of similar projects and any progress made in order to improve the designing of the project.
合同 编号：日期： 买受人： 出售人： 本合同由买卖双方订立，根据本合同规定的条款，买方同意购买，卖方同意出售下述商品： 1.货名，规格，数量 2.单价，总价 3.生产国和制造商 4.包装 用坚固的新木箱包装，适宜长途海运，并具备良好的防潮，防震，防锈，耐粗暴搬运能力，由于包装不当而引起的货物损坏或由于防护措施不善而引起货物锈蚀，卖方应赔偿由此而造成的全部损失费用。 5.唛头 卖方应在每件包装上，用不褪色油墨清楚地标刷件号、尺码、毛重、净重、“此端向上”、“小心轻放”、“切勿受潮” 等字样。 6．运日期 7.装运港 8.目的港
9.保险装运后由买方投保。 10.支付条件 ⑴信用证付款，买方在收到卖方根据合同第12条规定的提前装运的通知后，应于运输的15日到20日之前，按货物总金额的全部。通过_______（银行），设立以卖方为受益人的不可撤销的信用证。卖方凭本合同第11条规定的装运单据及开出的即期汇票提交给开证银行贷款，信用证的有效期至货物运装后15天为止。 ⑵托收付款，卖方应把合第11条所规定的由_______(银行)开具的装运单据转交买方。 ⑶根据合同第11条货款应在收据收到的7天前生效。 11.单据 ⑴卖方应将下列单据提交付款银行托收付款，若以信汇付款，下列单据应寄买方： (a)填写通知目的口岸对外贸易运输公司的空白抬头、空白背 书的全套已装船的清洁提单，注明“运费到付”，并通知货口岸___________公司。 (b)发票五份，注明合同号，唛头。(唛头在一份以上，发票 需独立出具)。 (c)五份发票需注明货物重量，编号和发票相应的日期。 (d)按照本合同第16条第一项规定，提交由制造厂签发的质 量和数量/重量证明书及检验报告各两份。
编号：_______________本资料为word版本，可以直接编辑和打印，感谢您的下载 英文合同格式 甲方：___________________ 乙方：___________________ 日期：___________________
NO.11 ZHONGSHAN STREET XIAMEN FUJIAN CHINA SALES CONFIRMATION ［打印预览］［保存］［诅出］ 销货合同（Sales Confirmation） 国际货物买卖合同一般金额大，内容繁杂，有效期长，因此许多国家的法律要求采用书面形式。书面合同主要有两种形 式，即正式合同（CONTRACT ）和合同确认书（CONFIRMATION ）,虽然其繁简不同，但具有同等法律效力，对买卖双方均有约束力。大宗商品或成交额较大的交易，多采用正式合同；而金额不大，批数较多的小土特产品或轻工产品，或者已订立代理、包销等长期协议的交易
多采用合同确认书（亦称简式合同）。 无论采哪种形式，合同抬头应醒目注明SALES CONTRACT 或SALES CONFIRMATION （对销售合同或确认书而言） 等字样。一般来说出口合同的格式都是由我方（出口公司）事先印制好的，因此有时在SALES CONFIRMATION 之前加上 出口公司名称或是公司的标志等（我外贸公司进口时也习惯由我方印制进口合同）。交易成立后，寄交买方签署 （countersign ）,作为交易成立的书面凭据。 在SimTrade 中，买卖双方都可以起草合同，填写时只需将名称、地址等内容作相应变化既可。如合同由买方起草时，上方空白栏则填入进口商公司名称及地址，以此类推。 报表上方两行空白栏 为出口商公司抬头，须分别填写出口商的英文名称及地址。 如:GRAND WESTERN FOODS CORP. Room2501, Jiafa Mansion, Beijing West road, Nanjing 210005, P. R. China Messrs 详细填列交易对象（即进口商）的名称及地址。 在SimTrade 中，进口商的详细资料请在淘金网”的公司库里查询。 如：Dynasty Furniture Manufacturing Ltd. 3344-54th Avenue S. E. Calgary, Alberta T2C OAS Canada No. 销货合同编号，由卖方自行编设，以便存储归档管理之用。 在SimTrade 中，该编号已由卖方在起草合同时填入，单据中不能再更改。 Date 填写销货合同制作日期。 如：2005年2月18日，可以有以下几种日期格式填法： 1.2005-02-18 或02-18-2005 2. 2005/02/18 或02/18/2005 3. 050218 （信用证电文上的日期格式） 4. February 18, 2005 或Feb 18, 2005 Product No. 填写货号，销货合同上应记明各种货物编号，以求联系沟通方便。 在SimTrade 中，货号必须选择淘金网”的产品展示”里已有的商品编号。 Description 品名条款。此栏应详细填明各项商品的英文名称及规格，这是买卖双方进行交易的物质基础和前提。对商品的具体描述说明是合同的主要条款之一，如果卖方交付的货物不符合合同规定的品名或说明，买方有权拒收货物、撤销合同并提出损害赔偿。 在SimTrade 中，商品的详细资料请在淘金网’产品展示”里查找，此栏目填写必须与淘金网的商品详细资料里商品英 文名称及英文描述完全一致。 例1 :产品01005 的商品描述: CANNED SWEET CORN 3060Gx6TINS/CTN 例2:产品04001 的商品描述：WOODEN TEA SERVICE
编号：_____________ 国际技术咨询服务合同 委托方：___________________________ 咨询方：___________________________ 签订日期：_______年______月______日
中国________________________公司（以下简称委托方）为一方，_____国 __________________________ 公司（以下简称为咨询方）为另一方，双方就 _________________________的技术咨询服务，授权双方代表按下列条款签订本合同。 This Contract is made and entered into through friendly negotiation by and between China_________________________ (hereinafter referred to as “Client”)， as one party， and__________________________ (hereinafter referred to as“Consultant”)，as the other party， concerning the technical consultancy service of________________________， under the following terms and conditions: 第一条合同内容 Article 1 Contents of Technical Consultancy Service 1.1 委托方希望获得咨询方就___________________________提供的技术咨询服务，而咨询方愿意提供此项服务。 Whereas Client desires to obtain the technical consultancy service of from Consultant and Consultant has agreed to perform such services. 1.2 技术咨询服务范围详见本合同附件一。 The Scope of Technical Services is defined in Appendix 1. 1.3 技术咨询服务的进度安排详见本合同附件二。 The Time Schedule for the Services is shown in Appendix 2. 1.4 技术咨询服务的人员安排见本合同附件三。 The Manning Schedule is described in Appendix 3.
1.Sales Agreement The agreement, (is) made in Beijing this eighth day of August 1993 by ABC Trading Co., Ltd., a Chinese Corporation having its registered office at Beijing, the People’ Repubic of China (hereinafter called “Seller”) and International Trading Co., Ltd., a New York Corporation having its registered office at New York, N.Y., U.S.A. (hereinafter called “Buyer”). 2.WITNESSETH WHEREAS, Seller is engaged in dealing of (product) and desires to sell (product)to Buyer, and WHEREAS, Buyer desires to purchase(product) from Sellers, Now, THEREFORE, it is agreed as follows: 3.Export Contract th This Contract is entered into this 5 day of August 1993 between ABC and Trading Co., Ltd. (hereinafter called “Seller”) who agrees to sell, and XYZ Trading Co., Ltd. (hereinafter called “Buyer”) who agrees to buy the following goods on the following terms and condition. 4.Non-Governmental Trading Agreement No. ＿＿ This Agreement was made on the＿day of＿ 19＿, BETWEEN ＿(hereinafter referred to as the Seller) as the one Side and ＿ (hereinafter referred to as the Buyer) as the one other Side. WHEREAS, the
XIAOLING TRADE CO.,LTD NO.11 ZHONGSHAN STREET XIAMEN FUJIAN CHINA SALES CONFIRMATION Dear Sirs, [打印预览][保存][退出]
销货合同(Sales Confirmation) 国际货物买卖合同一般金额大，内容繁杂，有效期长，因此许多国家的法律要求采用书面形式。书面合同主要有两种形式，即正式合同（CONTRACT）和合同确认书（CONFIRMATION），虽然其繁简不同，但具有同等法律效力，对买卖双方均有约束力。大宗商品或成交额较大的交易，多采用正式合同；而金额不大，批数较多的小土特产品或轻工产品，或者已订立代理、包销等长期协议的交易多采用合同确认书（亦称简式合同）。 无论采哪种形式，合同抬头应醒目注明SALES CONTRACT或SALES CONFIRMATION（对销售合同或确认书而言）等字样。一般来说出口合同的格式都是由我方（出口公司）事先印制好的，因此有时在SALES CONFIRMATION之前加上出口公司名称或是公司的标志等（我外贸公司进口时也习惯由我方印制进口合同）。交易成立后，寄交买方签署（countersign），作为交易成立的书面凭据。 在SimTrade中，买卖双方都可以起草合同，填写时只需将名称、地址等内容作相应变化既可。如合同由买方起草时，上方空白栏则填入进口商公司名称及地址，以此类推。 报表上方两行空白栏 为出口商公司抬头，须分别填写出口商的英文名称及地址。 如：GRAND WESTERN FOODS CORP. Room2501, Jiafa Mansion, Beijing West road, Nanjing 210005, P. R. China Messrs 详细填列交易对象（即进口商）的名称及地址。 在SimTrade中，进口商的详细资料请在“淘金网”的公司库里查询。 如：Dynasty Furniture Manufacturing Ltd. 3344-54th Avenue S. E. Calgary, Alberta T2C OAS Canada No. 销货合同编号，由卖方自行编设，以便存储归档管理之用。 在SimTrade中，该编号已由卖方在起草合同时填入，单据中不能再更改。 Date 填写销货合同制作日期。 如：2005年2月18日，可以有以下几种日期格式填法： 1. 2005-02-18或02-18-2005 2. 2005/02/18或02/18/2005 3. 050218（信用证电文上的日期格式） 4. February 18, 2005或Feb 18, 2005 Product No. 填写货号，销货合同上应记明各种货物编号，以求联系沟通方便。 在SimTrade中，货号必须选择“淘金网”的“产品展示”里已有的商品编号。 Description
买卖合同英文范本标准版本 买卖合同英文范本标准版本 买卖合同在外貌企业中一般中英文版的，英语通用语言，方便使用。买卖合同英文范本有哪些呢?下面是的买卖合同英文范本资料，欢迎阅读。 买卖合同英文范本篇1 CONTRACT Contract No.: The Buyers: The Sellers: This contract is made by and between the Buyers and the Sellers; whereby the Buyers agree to buy and the Sellers agree to sell the under-mentioned goods subject to the terms and conditions as stipulated hereinafter: (1)Name of Commodity： (2) Quantity: (3) Unit price: (4)Total Value: (5) Packing: (6) Country of Origin : (7) Terms of Payment: (8) insurance: (9) Time of Shipment: (10) Port of Lading: (11) Port of Destination: (12)Claims: Within 45 days after the arrival of the goods at the destination, should the quality, Specifications or quantity be found not in conformity with the stipulations of the contract except those claims for which the insurance company or the owners of the vessel are liable, the Buyers shall, have the right on the strength of the inspection certificate issued by the C.C.I.C and the relative documents to claim for compensation to the
销售合同 SALES CONTRACT 买方：JOONAS&CO.,LTD, 10 LOUIS PASTEUR STEET POR T LOUIS MAURITIUS 合同号/Contract No: BF20100601 The Buyer : JOONAS&CO.,LTD, 10 LOUIS PASTEUR STEET PORT LOUIS MAURITIUS TEL：230-2400778 FAX: 230-2408285 卖方：唐山丰润百丰商贸 日期/Date: 2010-05-29 TEL: 0086 -315-5505831 FAX: 0086-315-5505833 The Seller: T angshan fengrun baifeng Trading Co.ltd 兹经买卖双方同意,由买方购进,卖方出售下列货物,并按下列条款签订本合同: This CONTRACT is made by and between the Buyers and Sellers; whereby the Buyer agrees to buy and the Seller agrees to sell the under mentioned goods on the terms and conditions stated below: Description of Goods: As follows. 1.原产地和制造厂家（Country of Origin and Manufacturer）： 中国China T angshan fengrun baifeng Trading Co.ltd 2.包装（Packing）：STANDARD EXPORT PACKAGING 3.Shipment（装运方式）：合同中货物全部用20’集装箱海运In Contract by 20’ Container. 4.装运期限（Time of Shipment）：WITHIN15-20 WORKING DAYS AFTER RECEIPT OF 30%T/T 5.装运口岸（Port of Loading）：上海中国SHANGHAI China 6.目的口岸（Port of Destination）：Port Louis, Mauritius 7.付款条款(T erms of Payment）：30%DOWN PA YMENT + 70% T/T AFTER RECEIVED THE COPY OF B/L 8.签约合同（Sign of Contract）：本合同传真有效This contract will valid for fax contract sign 9.人力不可抗议(Force Majeure)：由于水灾，火灾，地震，干旱，战争或协议一方无法预见，控制，避免和克服的其他事件导致不能或暂时不能全部或部分履行本协议，该方不负责托。但是，受不可抗议力事件影响的一方必须尽快将发生的时间通知另一方，并在不可抗议力事件发生15（拾伍）天内将有关机构的不可抗议力事件的证明寄交对方。Either party shall not be held responsible for failure or delay to perform all or any part of this agreement due to flood, fire, earthquake, draught, war or any other events which could not be predicted, controlled, avoided, or overcome by the relative party. However, the party affected by the event of Force Majeure shall inform the other party of its occurrence in writing as soon as possible and thereafter send a certificate of the event issued by the relevant authorities to the other party within 15 days after it’s occurrence. 10. 货物要求（CRC requirements）: 10.1 每件货物重量大约5吨。Weight of Coils: About 5 tons
英文技术服务合同模板 篇一：国际技术咨询服务合同 （中英文 ）】 国际技术咨询服务合同 （中英文） technical consultancy service contract 合 同 号： contract no ___ 公司（以下简称委托方）为一方， ___________ 公司（以下简称为咨询方）为另一方，双方就 的技术咨询服务，授权双方代表按下列条款签订本 合同。 this contract is made and entered into through friendly negotiation by and between china ___________________________________________ (hereinafter referred to as “ client ” ), as one party, and ________________________ (hereinafter referred to as “ consultant ”),as the other party, concerning the technical consultancy service of __________ , under the following terms and conditions: 第一条 合同内容 article 1 contents of technical consultancy service whereas client desires to obtain the technical consultancy service of from consultant and consultant has agreed to perform such services. 1.2 技术咨询服务范围详见本合同附件一。 签订日期： date of signature: 签订地点： place of signature: 中国 1.1 委托方希望获得咨询方就 方愿意提供此项服务。 提供的技术咨询服务，而咨询
TABLE OF CONTENTS 1. Work to be Performed. 咨询事项 2. Compensation. 报酬 3. Independent Contractor Relationship. 对方各自独立的关系 4. Ownership of Work Product. 工作成果的所有权 5. Confidentiality. 保密 6. General Provisions. 一般性规定 This Consulting Contract is being entered into by X Company (“Client”) and Jane Doe (“Consultant”) this ____ day of . 1. Work to be Performed. 咨询事项 See attached project plan. 2. Compensation. 报酬 Client shall pay Consultant $ ___ per hour due on or before the first Friday following the end of any week in which Consultant performs services for Client. OR Client shall pay Consultant a flat fee of $___ as total compensation for the project described below. Payment shall be made as follows: a. $___ due before work will begin, and b. $___ due upon receipt of final deliverable. 3. Independent Contractor Relationship. 对方各自独立的关系 Consultant's relationship with Client will be that of an independent contractor, and nothing in this Agreement is intended to, or should be construed to, create a partnership, agency, joint venture, or employment relationship. No part of Consultant’s compensation will be subject to withholding by Client for the payment of any social security, federal, state ,or any other employee payroll taxes. 4. Ownership of Work Product. 工作成果的所有权 Consultant agrees that all work product developed by her alone or in conjunction with others in connection with the performance of services pursuant to this Agreement is and shall be the sole property of Client, and Consultant shall retain no ownership, interest, or rights therein. Work product includes but is not limited to reports, graphics, memoranda, slogans, and taglines. 5. Confidentiality. 保密 5.1 Definition of Confidential Information. "CONFIDENTIAL INFORMATION" as used in this Agreement shall mean any and all technical and non-technical information including patent, copyright, trade secret, proprietary information, computer files, and client information related to the past, current, future, and proposed services of Client and includes, without limitation, Client property, and Client's information concerning customers, research, financial information, purchasing, business forecasts, sales and merchandising, and marketing plans and information. 5.2 Nondisclosure and Nonuse Obligations. Consultant agrees to protect the confidentiality of all Confidential Information and, except as permitted in this section, Consultant shall neither use nor