component1: 流体性质设置
入口边界条件设置
出口边界条件设置
网格的设置
component2: 建模部分
矩形1
矩形2
chamfer1
mesh control edge 1
Form Composite Edges 1(cme 1)
That concludes the geometry for the reacting jet. Now define a coupling variable that can be used to apply the outlet conditions from the previous model to the inlet of the current。

Linear Extrusion 1 (linext1)
REACTING FLOW(RSPF)
入口边界条件1设置
物质浓度入口1边界条件
物质浓度入口2边界条件
出口边界条件
反应项的定义
Use the tabulated heat capacities to create interpolation functions, one for each species.
the heat transfer interface.
初始值的设置
热源项设置
网格设置：
Edit Physics-Induced Sequence.
求解设置：
求解1直接求解求解2设置
Now solve the reacting isothermal jet. The complicated reactions reduire adjustment of the CFL-number controller parameters.。