Below are copies of Black & Decker's SQA-015 Forms. 下面是SQA-015的一些表格D
Just double click on the icon to open the file and save it in your computer.
只需双击即可打开，然后另存在你的电脑中SQA-015 Document Package Should Include The Following Documents:-
SQA-015送样文件包括以下内容
:-1
SQAF-016 - Cover Sheet 封面-
用编号为SQAF-016的表格2SQAF-017 - 100% Inspection Report
(Must measure 6 parts per cavity and number them)零件的全尺寸报告-用编号为
SQAF-017的表格，必须每个模穴测量6个零件的全部尺寸，并对此
6个零件进行编号以使样品与检验报告数据相一致3
Raw Material Certificate 零件的材质证明
4Gage R&R Report with Raw Data on All QCs 关键量具的GR&R 报告(用来测量QC 尺寸的量具)，结果填写在SQAF-017表格上5
Cpk Report with Raw Data on All QCs - Cpk>=1.33QC 尺寸的工序能力分析报告，结果填写在SQAF-017表格上6
Function Test Report if Required on the drawing 如图纸有特殊测试要求，须附测试报告7
Process Flow Chart 工序流程图8
SQAF-018 - Quality Control Plan 质量控制计划-用编号为SQAF-018的表格9Process FMEA Report for Critical Part
对于关键零件须有过程FMEA 报告
10Marked up Black & Decker Drawing.
The numbers indicated on the drawing should match the numbering on SQAF-017.百得的图纸-每个尺寸要编号且与SQAF-017表格上的编号一一对应
Note:
注意：
1Please staple these documents together as above order and send to B&D. Thanks.请按照以上顺序装订所有文件
2All documents MUST be completed in English
所有文件必须用英文作成SQA-015。