质量保证协议Quality guarantee agreement需方全称：___________________________________（以下简称甲方）公司地址：___________________________________电话： ____________________________________________________传真_______________________________________________________BUYER:MOVING TECHNOLOGY (SHEN ZHEN) CO., LTD, (abbreviated: Party A)ADD: ___________________________________________________________TEL: ___________________________________FAX: ___________________________________供方全称：________________________________ （以下简称乙方）公司地址：________________________________________________Seller: Dong guan Wei Hong Hareware plastic Co., Ltd (abbreviated: Party B)ADD: No. 188th, Ping Shan, Tang xia, Dongguan CityTEL: ___________________________________FAX: ___________________________________产品名称:沙发调节器五金件Product Name: Sofa adjuster hardware parties本协议为《采购协议》的附件之一，适用于正常采购到货产品及索赔到货产品的质量要求，与该协议有同样的法律效力，甲乙双方应严格遵守。
As one of supplementary of Purchasing Agreement, this agreement applies to the quality requirement of normal purchase and claims. 甲乙双方以相互信任、相互合作的态度，对该协议的以下条款达成一致：Based on the mutual trust, mutual cooperation, both parties agree to achieve the agreement as below:产品种类：Product codes第一条产品标准Standard乙方应严格按照前期甲方测试确认可以接受的样品性能、以及按照甲方提供的设计图纸和技术，进行本产品的生产和向甲方批量供货。
Party B should provide the goods whose performance, design, technology parameter are same as the samples confirmed by Party A.第二条检验方法 testing way2．1样品封样：在第一批供货之前，乙方提供______个产品/每个编码，由甲方研发部、质量检验部和乙方共同签字确认后，作为此产品的封样样品，以后的来料检验, 成品检验将以封样样品为检验的标准之一。
Sealed Sample: before 1st shipment lot, Party B should provide______pieces/code samples, which should be approved and sign off by the Research & development Dept. and quality control Dept. of Party A and Party B, as the sealed samples; the inspection of incoming material and finished goods should referring to the sealed samples as the standard.2．2检验标准：以甲方提供的设计图纸和技术参数规定、封样样品、甲方的交验标准、相关国家标准、甲乙双方承认的抽样质量标准为依据进行检验。
Inspection standard: Based on thedesign drawing, technology parameter, sealed samples, specific inspection standard provided by Party A, and approved AQL standard by both parties.第三条信息沟通communication3．1甲方在来料检验中，发现不合格产品，需对乙方开具《供应商质量异常报告》，乙方需在_____日内对《供应商质量异常报告》中质量问题的形成原因、纠正预防措施、措施实施时间等内容，以书面形式进行回复。
对于甲方退货批次，乙方还需向甲方提供退货批次的处理方式和相关质量记录。
Once Party A finds the defects during in-house inspection, will issue the Quality Exception Report to Party B, Party B should reply in written about the defect root, corrective action, improving date, etc.; if goods refund from Party A, Party B should give the resolving ways and keep a good record.3．2乙方每月需对甲方来料检验、生产制程和客服中心返还的需要索赔的产品进行分析，并在每月______日前向甲方提供分析报告。
Party B should monthly analyze the inspection report, production procedure, and claims from Party A, and provide the analysis reportbefore______date each month.3．3甲乙双方定期召开品质沟通会议，会议时间另由双方协商确定。
Both Parties will have the regular quality session, date and time should be confirmed by both parties.第四条问题解决及违约责任problem resolution and breach responsibility4．1乙方对本协议第2,3,4条所列条款执行不利，且在甲方提出改进要求后乙方仍无改进迹象，甲方有权取消乙方的合格供方资格。
If Party B doesn’t well cooperate for Clause two, three & four in the agreement, still not improve after requesting by Party A, and Party A has the right to cancel the Supplier membership.4．2乙方应保证到货的型号规格与《采购订单》和《技术规格书》一致，并完全按照《技术协议书》中的标准供货。
对由于到料与《采购订单》和《技术规格书》中的标准不一致的，甲方有权要求乙方退货、换货，并按采购合同的约定承担相应的赔偿责任。
Party B should guarantee the goods codes and specification are same as requested in Purchasing orders and technology specification; if any discrepancy, Party A has the right to reject goods, request to change, or compensate according to the purchasing orders.4．3乙方应承担交货至甲方运输过程中出现的来料损坏、丢失、外包装破损等损失。
Party B should undertake the responsibility for any damage, loss of goods during the transportation. 4．4甲方在来料检验时对来料批判定为不合格批时，应及时通知乙方，乙方应当在______小时内派人进行确认。
Party A should notify Party B if unacceptable defects and Party B should assign the relative quality & technology staffs to confirm, investigate and give corrective actionwithin________hours in written.4．5批量供货时,相同物料来料检验出现连续批次不合格；制程淘汰率连续___个月超标/含等于（___%）或出现批量质量事件（批次同种故障率>= _______ %）或重大质量投诉。
乙方产品出现以上任何一种情况，除乙方必须承担由此造成的一切损失外，甲方尚有权采取库存相关产品退货、罚款（订单金额的____% ）、暂停乙方供货，限期整改等措施。
If the same code products occur the continuous defects, and the percentage of defects continuously exceed (including equal to_______ %) /month or the defects>=_____% in the same shipment lot or serious quality complaint, Party B must be responsible for all the losses, Party A has the right to rejectall stock goods, penalty (_____% of purchasing amount), stop Party B to provide goods, and request to improve in the limited period.a)如乙方泄漏未经甲方允许私自保留或泄露甲方的机密资料造成甲方经济损失的,乙方将承担因此而产生的所有经济及法律责任；If Party B keep or leak any confidentialinformation without permission from Party A, party B shall bear all the economiclosses and legal responsibilities.b)如乙方在向甲方供应的任何材料,零部件等中含有有关环境法规规定的对环境有害的材质,一经查出,乙方供应的任何材料、零部件在终端消费者使用时出现安全问题和对人体产生重大伤害问题,乙方将承担因此事件所产生的所有相关责任和费用,并负责赔偿给甲方所造成的所有相关损失；If Party B supply the spare parts of any materialcontained in the environmental regulations of the materials harmful to theenvironment, unsafely problem or harmful to human being at end customer, andparty B shall undertake the event of all relevant obligations and compensate for partsof all relevant losses.c)以上损失在双方未协商好或未经司法机关裁定前,以乙方所有货款暂时作为抵押,甲乙双方将依最后处理结果予以相关责任履行；If any losses mentioned above happen,before the final confirmed settlement can be reached, order payment will beregarded as the compensation mortgage till good settlement.4．6 来料检验过程中出现以下状况时：Below problems during the inspection:4.6.1 来料批量与送样不符时：乙方应____日内更换合格物料给甲方，不得延误甲方生产，如乙方原因导致甲方生产停线将按_____元/小时的标准赔偿甲方停产损失。