当前位置:文档之家› 32切割打磨作业指导书

32切割打磨作业指导书



Operation
1.对产品进行划线。
1. Scribe on the products.
2.进行对产品的切割。
2. Cut the product.
3.切割完成后,对产品的修正。
3.Correct the product after cutting.
4.完成修正后对产品进行清理。
4. Clean the product after correcting.
目视
visual observation
钢卷尺
Steel tape
2.确认产品有无割伤、割错。
2.Check if the product is slashed or cut wrong.
目视
visual observation
3.确认产品的外观是否光洁,无损伤。
3. Check if the product appearance is clean and no damage.
2.check if the cutting machine and the grinding machine are working well.
3.确认电源是否正常。
3. Check if the power is working well.
1.产品切割线的准确。
1.Product cutting line shall be accurate.


Preparation
1.确认切割片是否紧固,打磨机的膜片是否牢固。
1. Check if the cutting slice is fastened,check if diaphragm on grinding machine is fastened.
注意事项
Precautions
2.检查切割机与打磨机是否工作பைடு நூலகம்常
2.产品内部的整洁。
2.Product interior shall be clean.
3.产品内部的平整度。
3.Product interior shall be smooth.
4.作业人员佩戴相应防护用品,工作场地通风。
4.Operators shall wear protective equipment, and the workshop shall keep ventilated.
工序品质标准
Process Quality Standards
内容
Content
仪器、方法
Equipment and Methods
对照产品图纸进行切割,尺寸不得-1mm。
1. Cut the product according to the drawings,the deviation shall be within 1mm.
文件名称
File Name
切割、打磨作业指导书
Cutting、Granding Operating Instructions
修改状态
Modifying Status
编制
Editing
审核
Audits
批准
Approval
实施日期
Implementation Date
A/0
2013.3.15




Operating Rules and Regulations
相关主题