PRP1 厂区环境PRP1 Surroundings sanitation of the plant1.1加工厂位于滕州市洪绪镇团结村，水源充足、交通便利及周围无有碍食品卫生的污染源，工厂环境长期保持清洁。
The plant lies in Tengzhou City Hongxu town Tuanjie village,Sufficient water source、Convenient transportation and so it is a perfect food industry basis without any pollution resource，The plant environment is kept clean for a long time1.2厂区路面应全部硬化，无裸地、无破损、无积水，保持地面清洁；空地以草坪绿化。
The roads in the plant area was all hardening，no ground is exposed、no damaged、no water gathered，keep the floor clean；The plant area was greened with lawn。
1.3加工区与生活区分开。
The processing area is separated from the living area.1.4厂区内不得有产生有害（毒）气体或其它有碍卫生的场地和设施。
There are no other establishments that can produce poisonous smoke are harmful to sanitation.1.5厂区禁止饲养如猫、狗、猪、观赏鸟类等任何动物。
It is forbidden to raise cats, dogs, pigs, birds and other animals that have nothing to do with the broilers slaughtering and processing.1.6厂区内按害虫、害鼠控制程序定期灭鼠除虫。
Control strictly the pests and rodents in the plant areas accordance to “control program of Pest s and Rodents”1.7厂区卫生间为水冲式，且有足够数量，并备有洗手、防虫、防蝇设施。
墙壁、地面以不透水、耐腐蚀的材料修建，易清洗消毒。
Toilets in the plant of a water flushing type ，and enough quantity，and equipped with hand washing, pests/rodents preventing.the corrosion resistant materials of the wall and the ground to waterproof, easy cleaning and disinfection.1.8厂区的排水系统畅通，车间、仓库、冷藏库周围不得有积水。
keep the drainage system of the plant smoothly，workshop、storehouse around no water gathered.1.9废弃物由厂区清洁员定期清理，环卫部门派专车随时外运，不堆积。
The waste is cleaned regularly by the factory cleaner,sanitation departments Send a special car at any time,no accumulation.1.10工厂有适当的污水处理设施，且设在工厂外的下风向位置，生产中产生的废水、废料的排放和处理符合国家环保规定。
There are proper sewage treatment facilities in the factory,and the downwind position located outside the factory,the wastewater after disposed meets the national standards.1.11厂区建有与生产能力相适应的符合卫生要求的原料、辅料、化学物品、包装物料储存等辅助设施和废物、垃圾暂存设施。
The plant is equipped with auxiliary facilities such as raw materials, auxiliary materials, chemicals, packaging materials storage, and waste and garbage storage facilities that meet the requirements of health.PRP2 厂房及设施要求PRP2 Plant and facility requirements2.1.厂房布局及结构要求：Workshop layout and structural requirements2.1.1厂房采用单层平面布局，顺序布局，生区和熟区相对独立。
生区供原料验收、滚揉腌制、穿串成型、油炸烟熏等；熟区供产品熟制后再处理、单冻、包装加工工序之用。
不同的加工区域分别设有独立的更衣室、卫生间、浴室和清洗消毒间。
整个加工厂布局合理，生熟区的人流、物流、气流及排水均相对独立，各行其道，井然有序，无交叉污染。
Layout of buildings: layout in an order of workshops, raw area and heat treatment area are separated strictly,raw area is raw material acceptance、tumbling marinating, string forming, fried smoked etc.set up steaming、IQF、packing area；different processing areas are set up respectively independent clothes change rooms、toilets,shower rooms and disinfection room.the plant has a reasonable layout in the raw materials processing area and heat treatment area. The route of workers move and products transport, ventilation, water supply and drainage are relatively independent and well organized. There is no chance of cross-contamination.2.1.2车间地面用防滑、坚固、不透水、耐腐蚀的水磨石和大理石材料修建，平坦、无积水并保持清洁；车间出口及与外界相连的排水、通风处应当安装防鼠、防蝇、防虫等设施。
The floor with a skid、sturdy and durable、waterproof、corrosion resistant of terrazzo and marble material，flat、no water and keep clean；Facilities such as rodent control, fly prevention and pest control should be installed at the outlet of the workshop and the drainage and ventilation room connected with the outside2.1.3车间内墙壁、屋顶和天花板使用无毒、浅色、防水、防霉、不脱落、易于清洗的聚苯乙烯复合板或聚胺脂复合板材料修建，墙角、地角、顶角具有弧度。
The workshop walls、roof and ceilings use of Non-toxic、light colour、waterproof、mold、Not falling off、Easy cleaning polystyrene composite board or polyurethane composite board for building，corner, angle, apex has a radian.2.1.4车间门窗用浅色、平滑、易清洗、不透水、耐腐蚀的坚固材料制作，结构严密。
Workshop door and window use of Light colour、Smooth、Easy clean、waterproof、corrosion resistant Strong material, tight structure.2.2 设施要求Facility requirements2.2.1 照明、通风及降温Illuminating, ventilating and cooling2.2.1.1车间内位于食品生产线上方的照明设施装有防护罩。
生产加工、包装区域的光线强度在220lux以上、检验区域在540lux以上、库房的光线强度在110lux以上，光线要求不改变被加工物的本色为宜。
The illumination of the workshops which is waterproof and with protection cover to avoid polluting the products in case the lamp is broken . the lightening intensity in processing andpacking areas is no less than 220Lux, the check spots is not less than 540Lux. cold storage is not less than 110Lux, light asked not to change processing object color is appropriate.2.2.1.2车间采用全封闭式：进气口设有空气过滤，进出气口设有防蝇防虫装置，定期清洗和换新及检修，以确保通风换气良好，室内温度恒定，避免蒸汽、水汽凝结及集热的发生，及时排除污浊空气，保持空气新鲜。