WELDING STORAGE TANKS焊接储罐1.0 SCOPE范围This specification defines the welding, thermal treatment, examination, and testing requirements for shop and field fabrication of storage tanks. It supplements the codes listed in Section 2.0 of this specification.本规格书确定了储罐工厂和现场制作的焊接、热处理、检验和测试的技术要求。
它是对列在本规格书2.0节的补充。
1.1 Definitions:定义Vendor-Contractor: 卖方－承包商：The word Vendor-Contractor will be used for the main supplier responsible for Welding.“卖方－承包商”用来指负责焊接的主要供货方。
Owner:业主：The word Owner will be used for BASF-YPC.“业主”一词用来指BASF-YPC。
Licensor:签证方：The Licensors are BASF or BASELL etc.专利商指BASF 或BASELL等。
Purchaser:采购方：Party responsible for issuing the Purchase Order.This may be the main Engineering, Procurementand Construction (EPC) Contractor acting as anagent for the Owner.负责发出采购定单的一方。
它可以是作为业主代表的工程设计、采购和施工（ＥＰＣ）承包商。
2.0 APPLICABLE CODES, STANDARDS, AND REFERENCES适用的规范、标准和参考文件。
The following Codes, Standards and Specifications form a part of this specification to the extent indicated by the references thereto. When an edition date is not indicated for a code or standard, the latest edition and addenda in force at time of purchase shall apply.下列规范、标准和规格书为本技术规格书的一部分。
当没有指明规范或标准的出版日期时，在采购期间应采用最新版本以及有效的附录。
2.1 API (American Petroleum Institute)API（美国石油协会）Standard 620 标准620Recommended Rules for Design and Construction of Large, Welded, Low Pressure Storage Tanks大型、焊接、低压储罐的设计和施工的推荐规则。
Standard 650 标准650Welded Steel Tanks for oil storage. 焊接钢制原油储罐2.2 ASME (American Society Of Mechanical Engineers) Boiler And PressureVessel Code)ASME（美国机械工程师协会）锅炉和压力容器标准Section II, Part C Welding Rods, Electrodes, and Filler Metals第II章，Ｃ篇焊条、电焊条和填充金属Section V Nondestructive Examination第V章无损检测Section VIII, Div. I Rules for Construction of Pressure Vessels第VIII章，第I分册压力容器施工规则Section IX Welding and Brazing Qualifications第IX章焊接与钎焊评定2.3 ASNT (American Society Of Nondestructive Testing)ASNT（美国无损检测协会）SNT-TC-1A Recommended Practice for NondestructiveTesting Personnel Qualification and Certification无损检测人员资格和取证推荐规则2.4 ASTM (American Society For Testing And Materials)ASTM（美国检验和材料协会）A833 Standard Practice for Indentation Hardness ofMetallic Materials by Comparison HardnessTester用比较硬度测试仪确定金属材料压痕硬度的准则E10 Standard Test Method for Brinell Hardness ofMetallic Materials金属材料布氏硬度的标准测试方法E18 Standard Test Methods for Rockwell Hardnessand Rockwell Superficial Hardness of MetallicMaterials金属材料洛氏硬度和洛氏表面硬度的标准测试方法E92 Standard Test Method for Vickers Hardness ofMetallic Materials金属材料维氏硬度标准测试方法E110 Standard Test Method for Indentation Hardnessof Metallic Materials by Portable HardnessTesters用便携式硬度仪确定金属材料硬度的标准测试方法E140 Standard Hardness Conversion Tables forMetals金属标准硬度转换表WELDING STORAGE TANKS焊接储罐2.5 AWS (American Welding Society)AWS（美国焊接协会）A2.4 Standard Symbols for Welding, Brazing andNondestructive Examination焊接、钎焊和无损检测的标准符号A3.0 Standard Welding Terms and Definitions标准焊接术语和定义Z49.1 Safety in Welding, Cutting and Allied Processes焊接、切割和二者结合的安全2.6 Chinese National Codes and Standards中国国家规范和标准Storage tanks fabricated within the Peoples Republic of China shall be designed, fabricated, inspected and tested fully in accordance with the latest revision of all applicable Chinese codes, standards, and project specifications, (unless otherwise stated in the applicable design documents)The requirements of this specification shall also apply, except that references to ASME, API, AWS etc. shall be modified to equivalent Chinese codes and standards.在中国制造的储罐，其设计、制造、检验与测试应完全符合所有最新版的相关中国规范、标准和项目规范（除非在相关设计文件中另有说明）。
除了ASME, API, AWS等相关的参考文件按照中国标准和规范的要求进行相应的修订外，本规格书技术要求也同样适用。
SH3046-92 Petrochemical design specification for verticalcylindrical steel welded storage tanks.立式圆筒式钢制焊接储罐用石油化工设计技术规范。
SH3048-93 Seismic design specification for petrochemical steelfacilities钢制石油化工设备抗震设计技术规范。
GBJ128-90 Vertical cylindrical steel welded storage tanks,fabrication, inspection and testing specifications.立式圆筒形钢制焊接储罐的制造、检验和试验规范。
GB5015-1992 Code of design for low pressure foam extinguishingsystems. (2000 Revision)低压泡沫灭火系统设计规范（２０００版）All other relevant Chinese standards and regulations.所有其他相应的中国标准和规程。
The above with exception of welded low pressure storage tanks, with a inside diameter over 15 meters, these are subject to API 620.以上内容不适用于内径大于１５米的低压焊接储罐，此类储罐的设计及施工应遵循AP1620。
2.7 BASF RPI 94/1 Annex 8.5 (attached)BASF RPI 94/1附录8.5（附后）3.0 GENERAL REQUIREMENTS 通用技术要求3.1 Welding to this specification shall conform to the requirements of theAPI 620 or API 650, whichever is applicable. Compliance with thisspecification and authorization of Welding Procedure Specificationsand Procedure Qualification Records shall in no way relieve theVendor-Contractor of the responsibility of providing welds which aresound and suited to the services for which they are intended.按本规格书的焊接，应与API620或API650的技术要求一致，取适用的那个。